SMTT - BOM and printing settings.xlsx

	B	C	D	E	I	J	K	L	M	N	P
1
2	SMTT - Special Model Transport Trailer
3	SMTT - Special Model Transport Trailer
4	Bill of materials:				Printing settings:
5	Bill of materials:				Printing settings:
6	Name:	Description:	Amount:	Link:	Name:	Layer height:	Walls:	Infill (gyroid):	Supports:	Material:	Other:
7	Filaments:				FLOOR	0.2mm	2	5	x	PET-G	All floor parts, except the FLOOR_FRAME
8	PET-G	Material for structural parts	At least 5kg		FLOOR_FRAME	0.2mm	4	20	x	PLA/PET-G
9	PLA	Material for walls and roof	At least 1kg		FRONT_UNDERCARRIAGE	0.16mm	6	25	x	PET-G	All front undercarriage, except the SKIRT and CONNECTOR
10	TPU	Tires material (can by any shore)	At least 350g		FRONT_SKIRT's	0.2mm	5	5	x	PET-G
11					TOWBAR_CONNECTOR	0.16mm	3	40	x	TPU
12	Screws and nuts:				PILLARS	0.2mm	4	20	x	PET-G
13	M3 nylock		4		REAR_UNDERCARRIAGE	0.16mm	6	25	x	PET-G
14	M3 nut		70		ROOF	0.2mm	3	10	x	PLA/PET-G
15	M3x10		50		SIDESKIRTS	0.2mm	2	5	x	PET-G
16	M3x10 countersunk		25		STORAGE_COMPARTMENTS	0.2mm	2	10	x	PET-G
17	M3x20		55		TOW_HOOKS	0.16mm	3	20	x	PET-G	These are dedicated settings for our hooks. When it comes to modified parts from other cars, stick to the original design recommendations.
18	M3x20 countersunk		120
19	M3x30		4
20	M3x30 countersunk		120		WALLS	0.2mm	2	10	x	PLA
21	M3x40 countersunk		25		TIRE_INFILL	0.16mm	2	15	x	PET-G	First, print TIRE_INFILL, because during the printing of TIRE you will need to pause and insert the print inside, then continue printing. More details in the instructions.
22	M3x50		6		TIRE	0.16mm	3	20	x	TPU
23					ACCESORIES	0.2mm	2	10	x	TPU
24	Others:
25	Shock absorbers	1x 52mm set and 1x 55mm set	<--	Link
26	Bearings	6903-2RS 17x30x7mm	14	Link
27	LED strip	8MM PCB, 3000K, 3m	1	Link
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100