Pile Group Tool Test Plan
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
View only
 
 
ABCDEFGHIJKLMNOPQRSTUVWXYZAA
1
Pile Group Tool Test Plan
2
version
0.9
test date
10/25/17
3
test byjbl
4
version1.0.0
5
TaskSubTDescriptionmin versionpass / npdefault valuemin valuemax valueinvalid test valueinvalid test valueinvalid test valueremarks
6
1
User able to modify properties soil layers and see effect on response:
7
1a.specific weight (dry and wet)1.0passwet is called "saturated" in the app
8
1b.internal friction angle1.0pass60
9
1c.shear strength/stiffness1.0pass
10
1d.effect of the ground water table1.0pass
11
2
User able to modify number and properties of piles and see effect on response:
12
2a.Pile diameter1.0pass99not sure max value of '99' means anything...
13
2b.Embedded length1.0pass99not sure max value of '99' means anything...
14
2c.Length above ground (one value for the entire pile group)1.0pass99not sure max value of '99' means anything...
15
2d.Stiffness (Young’s modulus)1.0pass999not sure max value of '999' means anything...
16
3
User able to turn on/off the free/clamped pile head conditions
1.0passcheckbox works. Check displacements go down and tangent turn vertical as pile cap gets clamped.
17
4
User to control applied lateral force and observe system response to a change in force.
1.0pass
18
5Display deformed shape for each pile1.0passIs it showing this?
YES: displacement plot is showing the deformed state (deflection) for each pile
19
6Display moment diagram for each pile1.0pass
20
7Display Shear diagram for each pile1.0pass
21
8
A dynamic system plot that displays the actual configuration as identified by user parameters.
1.0passWhat does this mean (in terms of the what appears on the screen)?
The system plot instantly (dynamically) reflects changes in geometry, groundwater table, number of piles, length of piles, etc. This is quite different from earlier versions where the system plot was a generic image.
22
9Availability of slider and numeric field for force selection.1.0pass
23
10
Display of ultimate soil pressure as computed for the user-specified configuration
1.0passIs it showing this?
This is the p_ult plot. You . may have that plot deactivated in your preferences.
24
11
Display of the y50 parameter as computed for the user-specified configuration
1.0pass
25
12Display of the vertical stress profile for the layered soil.1.0passI *think* it is doing this...
Yes, it does.
26
13
More complex loading scenarios including vertical force and moment.
2.0N/A
27
14Additional Display options for pull-out simulations.2.0N/A
28
15
Switching between alternative methods for the identification of spring parameters.
2.0N/A
29
16
Export of an input file for OpenSees to enable students a quicker learning experience for more advanced modelling.
2.0N/A
30
17
Save and Load features for user settings, preferably in JSON format.
1.1N/A
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...
 
 
 
Sheet1