A | B | C | D | E | |
---|---|---|---|---|---|
1 | |||||
2 | EVO64 Production Rel 1 | ||||
3 | Category | Price | Notes | ||
4 | Circuit Board | $284.95 | All Surface mount parts in place (video & clock circuit, RAM, Logic chips, power caps, etc.) | ||
5 | Baseline BOM | $55.00 | Complete set of throughhole parts available from the EVO site, includes pins, ports, sockets & essential chips like the PLA | ||
6 | MOS Chips* | $136.50 | CIAx2, VICII, CPU, at least one SID (optionally two) - PLA and All ROMS are included with the board purchase | ||
7 | Additional BOM parts* | $0.00 | Everything is included with baseline BOM | ||
8 | Support for ClearVideo64 | $0.00 | Fully Integrated | ||
9 | Support for dual-SID Audio | $0.00 | Fully integrated | ||
10 | Support for Audio Preamps | $0.00 | NuTube64 and Triode64 Support are natively supported | ||
11 | Support for Cartridge ROMS | $0.00 | Support for up to 32x fully integrated cartridge roms (either 8KB or 16KB sizes supported), including games and onboard diagnostics | ||
12 | DIY Build time | On average, it will take an intermediate builder about 3.5 hours to complete an EVO build | |||
13 | Total | $476.45 | |||
14 | |||||
15 | ICS64 | ||||
16 | Category | Price | Notes | ||
17 | Circuit Board | $59.95 | Some surface mount parts in place, including RF modulator bypass and an MCU for ROM switching | ||
18 | Baseline BOM | $115.00 | based on prices from Mouser, using part numbers from the BOM provided by CBMStuff (BOM covers capacitors, resistors, inductors, diodes, sockets, logic ICs and port connectors) | ||
19 | Additional BOM parts* | $39.14 | Required DRAM & SRAM chips, the 6, 7 and 8 pin DIN ports, a Power switch, which need to come from secondary market places, because they're not available from Mouser | ||
20 | MixSID Module | $50.00 | Module to provide dual-SID support and extended addressing modes | ||
21 | ClearVideo64 Circuit | $0.00 | ICS64 has it's own RF Mod bypass circuit, which does a commendable job with video output, but it does NOT eliminate Jailbars or VICII video artifacts | ||
22 | MOS Chips* | $200.25 | CIAx2, VICII, CPU, at least one SID (optionally two), plus a required PLA and all ROMS, which are not included with the board | ||
23 | DIY Build time | On average, it will take an intermediate builder about 8-10 hours to complete an ICS64 (or similar build, like SixtyClone, Melius, etc.) | |||
24 | Total | $464.34 | |||
25 | |||||
26 | Price Difference | $12.11 | |||
27 | Percentage Difference | 3% | |||
28 | |||||
29 | * | References | |||
30 | Component Description | Price | Notes | ||
31 | DRAM (4164) | $20.72 | based on qty. of 8x from Jameco - https://www.jameco.com/z/4164-150-Major-Brands-IC-4164-150-DRAM-65-536-Bit-65-536x1-150ns-with-Page-Mode-DIP-16_41662.html | ||
32 | SRAM (2114) | $5.95 | based on qty. of 1x from Jameco - https://www.jameco.com/z/2114N-2-Major-Brands-IC-2114N-2-CMOS-SRAM-4096-Bit-1024x4-200ns_38973.html | ||
33 | 6 pin DIN | $2.49 | from CBMSTUFF.com shop | ||
34 | 7 pin DIN | $2.49 | from CBMSTUFF.com shop | ||
35 | 8 pin DIN | $2.49 | from CBMSTUFF.com shop | ||
36 | Power Switch | $5.00 | based on qty. of 1x, using average street price on eBay | ||
37 | MOS 6526 (CIA) | $80.00 | based in qty. of 2x, using average street price on eBay of $40 | ||
38 | ARMSID | $34.00 | based on qty. of 1x ARMSID from Retrocomp.cz | ||
39 | MOS 8565 R2 (VICII) | $22.50 | based on qty. of 1x, using average street price on eBay | ||
40 | PLAnkton PLA | $24.75 | based on qty. of 1x, using average street price on eBay | ||
41 | MOS ROM chips (Kernal, Basic, Chars) | $39.00 | based on qty. of 3x chips, using average bundle packaging price on eBay | ||
42 | |||||
43 | Prices listed exclude taxes and shipping fees | ||||
44 |