ABCDEFGHIJKL
1
Add your name if you can take on this Job. Return and update after Job is completed
2
TimestampYou NameYour Phone NumberDescribe the issue, opportunity, improvement request here:I will handle itResolution DateWhat work was done?Column 8
3
2/11/2025 17:27:52Terry Houts805-402-5145GFI maintenance for charging tablesTerry Houts3/1/2025Repaired faulty ground in two boxes and resealed
4
2/14/2025 11:23:59Stephen Adams314-616-9136Testing the system. Adding more context via EditStephen Adams
5
2/14/2025 12:11:42Dan Morrison314-308-5743Testing (kind of) - Erect new signage for Safety Rules in place of frequency board Dan MorrisonMay 5, 2025New two-sided signage showing Safety Rules on one-side and FAA authorized flying area.
6
2/14/2025 14:19:53Paul Geders314-623-5422Tractor needs front axle seal repairedPaul GedersOct 7, 2025Greg Tesson and Rick Wintjen replaced the axle seal.
7
3/2/2025 14:18:32Paul Geders314-623-5422Replace all Belt Cover Bolts on the Woods RM-306 mower deck. Do a general check of the mower.Paul Geders
8
3/6/2025 11:33:25Stephen Adams314-616-9136I would like to see flight line extended west of the pavilion. The drainage trench needs to be bridged. Route from flight line to flight line. Grass is fine to start. Tables, large scale hold-back posts, electric, etc. (The parking lot leaves me too far away from the group)Paul GedersOn Hold...limited funds.
9
3/6/2025 11:37:13Stephen Adams314-616-9136Develop a cross runway due to prevailing crosswinds. 90 degrees may not work but a 45 would be helpful. Grass strip is fine. Just need to compact soil and then mow it correctly.Paul GedersOn Hold...limited funds.
10
3/19/2025 0:00:00Paul Geders314-623-5422Establish "Flight Line" location in Secondary Flight Area west of pavilion perpendicular to Primary runway.Paul Geders3-22-2025Established Flight Safety Line at 100' west of the pavilion. Documented in the new Safety Rules.
11
6/11/2025Bart Asher314-537-3861Instead of flipping wood on benches I would like to try restaining and sealing the wood on one of the benches to see how it comes out. If is looks good I can do the rest. No cost to club as I have the stain and sealer. Bart Asher
12
6/17/2025 18:30:01Paul Geders314-623-5422Runway markings need re-painting. Should be yellow X's and white centerlines. Need old paint scraped off where loose.WhomeverWhen is the next sealing of the runway scheduled? Could this be completed at the same time?
13
9/12/2025 13:08:38Paul Geders314-623-5422Replace missing safety fence broken upright balusters and caps.Paul GedersParts Ordered 10-7-2025
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100