Energy Olympiad - 2019
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
£
%
123
 
 
 
 
 
 
 
 
 
ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
NameIssue/QuestionTESA feedbackBUILDSIM feedback
2
Mahi PalanisamiCan we make as many zones as we like, or are we supposed to have each floor be a zone? I might be reading too much in to column A of the zone summary spreadsheet. I wanted to check.
Yes, there were no zone limits, but in general, less zones often leads to better models!
3
Does your auto-generated baseline take into account the lighting controls required by the ASHRAE 90.1-2016 PRM? Or will we manually adjust the schedule for it?
4
Nithya Lavu
Is the fuel source restricted to gas on the project?
It seems like we could go electric for heating. Thank you for the response.
What other options would there be?
5
Mahi PalanisamiHi, we are trying to understand the fraction Service Hot Water schedule. How do the fractions work? Are they fractions of the 100 gallon tank for that hour?
For example 0.07 between 6a.m.-7a.m. means 7 gallons were used?
6
7
Nithya LavuThe infiltration input says 0.2016 cfm/sft adjusted by wind- could you specify wind conditions for this? ASHRAE 90.1.2013 says 0.4 cfm/sft for Exterior wall area at 75 Pascals. Why is this different from that input?
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...