Test report functionnal test

	A	B	C	D	E	F	G	H	I	J	K	N	O	P	Q	R	S
1	Test report				version:	1	author:	Branimir
2	No.	item	Test	Associated failure mode	Test description	Results	OK/ NOK	open issues	Tester	Date	Machine version	Results	OK/ NOK	open issues	Tester	Date	Machine version
3		ventilation performance alarms								yesterday OK today leaky setup	prototype 7 + industrial PCB + FW 2.33						v7 + FW 2.
4	1		PEEP alarm		1. set peep level 2. introduce PEEP fault by reducing mechanical PEEP setting 3. set PEEP back and trigger inhalations 4.				Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype IX PCB prototype FW 2.13
5	2		Residual volume alarm						Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
6	3		Volume within threshold		1. set volume to narrow limits around currently achieved volume (e.g. +-30mL) 2. increase pressure for overvolume 3. decrease to go below volume				Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
7	4		Pressure within threshold		1. normal operation 2. volume limit from previous test 3. set pressure to moderate value, rate to 0.3 and pressure limits to 1 cmH20 3.				Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
8	5		BPM alarm		1. set IE too high				Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
9
10		machine reliability alarms
11	6		arduino not found		1. disconnect ARduino cable 2. re-connect and hit reset error	machine keeps on running gives PC error and		weird GUI graphs - could be disabled when this alarm is detected	Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33	machine keeps on running gives PC error and		weird GUI graphs - could be disabled when this alarm is detected	Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
12	7		failed sensor calibration						Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
13	8		disconnected sensor		1. unplug sensor flow USB 2. unplug sensor pressure USB				Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
14	9		external power disconnect		1. shut off external power	alarm on PC and Arduino light			Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33	alarm on PC and Arduino light			Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
15	10								Branimir/Tom	10/04/2020	prototype 7 + industrial PCB + FW 2.33				Branimir/Tom/Bruno	09/04/2020	prototype 7 FW 2.34
16	11
17	12
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100