ABCDEFGHIJKLMNOPQRST
1
RegulationTemplateLast updatedTemplate Source Version
This is the version the template is based on, but may not be the latest version in existence.		Section
This is the article/annex/part the template is based on.		Source text
Updated if a new version of the legislation is published		Template items
Live version		Status
Updated monthly		Update log
Updated monthly
2
Consumer Product Safety Improvement Act (CPSIA) Children's Product Certificate (CPC)2024-08-08Children's Product Certificate - LinkNA1. Identification of the product covered by this certificate

Describe the product(s) covered by this certification in enough detail to match the certificate to each product it covers and no others.

2. Citation to each CPSC children’s product safety rule to which this product is being certified

The certificate must identify each applicable children’s product safety rule (see link above). If an exemption/determination applies that makes testing to a particular safety rule unnecessary, the citation for the children's product safety rule must still be listed in this section; the citation for the exemption/determination may be included under element 6.

3. Identification of the domestic manufacturer or importer certifying compliance of the product

Provide the name, full mailing address, and telephone number of the firm.

4. Contact information for the individual maintaining records of test results

Provide the name, full mailing address, e-mail address, and telephone number of the person maintaining test records in support of the certification. The person does not need to be from the firm identified in element 3, but it is the responsibility of the firm identified in element 3 to facilitate the provision of test reports when requested.

5. Date and place of manufacture

For the date(s) of manufacture, provide at least the month and year (or starting month and year for a continuous batch). For the place of manufacture, provide at least the city (or administrative region), state (if applicable), and country where the product was manufactured (finished product assembly). If the same manufacturer operates more than one location in the same city, provide the street address of the factory.

6. Date(s) and place(s) of testing

Provide the date(s) of the test(s) or test report(s) and location(s) of testing. Citations for exemptions/determinations may be included here.

7. Identification of any third-party, CPSC-accepted laboratory who conducted the testing

Provide at least the name, full mailing address, and telephone number. Registered small batch manufacturers who are not required to third-party test their product to certain children’s product safety requirements must include the registration number provided by the CPSC in this section of the CPC.		1. Identification of the product covered by this certificate

Note: Describe the product(s) covered by this certification in enough detail to match the certificate to each product it covers and no others.

2. Citation to each CPSC children’s product safety rule to which this product is being certified

Note: The certificate must identify each applicable children’s product safety rule (see link above). If an exemption/determination applies that makes testing to a particular safety rule unnecessary, the citation for the children's product safety rule must still be listed in this section; the citation for the exemption/determination may be included under element 6.

3. Identification of the domestic manufacturer or importer certifying compliance of the product

Note: Provide the name, full mailing address, and telephone number of the firm.

4. Contact information for the individual maintaining records of test results

Note: Provide the name, full mailing address, e-mail address, and telephone number of the person maintaining test records in support of the certification. The person does not need to be from the firm identified in element 3, but it is the responsibility of the firm identified in element 3 to facilitate the provision of test reports when requested.

5. Date and place of manufacture

Note: For the date(s) of manufacture, provide at least the month and year (or starting month and year for a continuous batch). For the place of manufacture, provide at least the city (or administrative region), state (if applicable), and country where the product was manufactured (finished product assembly). If the same manufacturer operates more than one location in the same city, provide the street address of the factory.

6. Date(s) and place(s) of testing

Note: Provide the date(s) of the test(s) or test report(s) and location(s) of testing. Citations for exemptions/determinations may be included here.

7. Identification of any third-party, CPSC-accepted laboratory who conducted the testing

Note: Provide at least the name, full mailing address, and telephone number. Registered small batch manufacturers who are not required to third-party test their product to certain children’s product safety requirements must include the registration number provided by the CPSC in this section of the CPC.		Matching

July 2025

Last checked date: 2025-07-13
Source version: N/A		August 2024: No changes

September 2024: No changes

October 2024: No changes

November 2024: No changes

December 2024: No changes

January 2025: No changes

February 2025: No changes

March 2025: No changes

April 2025: No changes

May 2025: No changes

June 2025: No changes

June 2025: No changes
3
General Certificate of Conformity (GCC)General Certificate of Conformity (GCC)2024-08-08General Certificate of Conformity - LinkNA1. Identification of the product covered by this certificate

Describe the product(s) covered by this certification in enough detail to match the certificate to each product it covers and no others.

2. Citation to each CPSC product safety rule to which this product is being certified

The certificate must identify each applicable safety rule (see link above). If an exemption applies that makes testing to a particular safety rule unnecessary, note the citation for the exemption under the safety rule (see GCC examples for recommendations on how to cite exemptions).

3. Identification of the domestic manufacturer or importer certifying compliance of the product

Provide the name, full mailing address, and telephone number of the firm.

4. Contact information for the individual maintaining records of test results

Provide the name, full mailing address, e-mail address, and telephone number of the person maintaining test records in support of the certification. The person does not need to be from the firm identified in element 3, but it is the responsibility of the firm identified in element 3 to facilitate the provision of test reports when requested.

5. Date and place of manufacture

For the date(s) of manufacture, provide at least the month and year (or starting month and year for a continuous batch). For the place of manufacture, provide at least the city (or administrative region), state (if applicable), and country where the product was manufactured (final assembly). If the same manufacturer operates more than one location in the same city, provide the street address of the factory.

6. Date(s) and place(s) of testing

Provide the date(s) of the test(s) or test report(s) and location(s) of testing.

7. Identification of any third-party laboratory who conducted the testing

Provide at least the name, full mailing address, and telephone number. This section may state “N/A” for a GCC because third-party laboratory testing is not a requirement for general-use products; however, if the responsible firm uses test results from a third-party laboratory as the basis for issuing its GCC, the law requires that the certifier must then provide information pursuant to this section.		1. Identification of the product covered by this certificate

Note: Describe the product(s) covered by this certification in enough detail to match the certificate to each product it covers and no others.

2. Citation to each CPSC product safety rule to which this product is being certified

Note: The certificate must identify each applicable safety rule (see link above). If an exemption applies that makes testing to a particular safety rule unnecessary, note the citation for the exemption under the safety rule (see GCC examples for recommendations on how to cite exemptions).

3. Identification of the domestic manufacturer or importer certifying compliance of the product

Note: Provide the name, full mailing address, and telephone number of the firm.

4. Contact information for the individual maintaining records of test results

Note: Provide the name, full mailing address, e-mail address, and telephone number of the person maintaining test records in support of the certification. The person does not need to be from the firm identified in element 3, but it is the responsibility of the firm identified in element 3 to facilitate the provision of test reports when requested.

5. Date and place of manufacture

Note: For the date(s) of manufacture, provide at least the month and year (or starting month and year for a continuous batch). For the place of manufacture, provide at least the city (or administrative region), state (if applicable), and country where the product was manufactured (final assembly). If the same manufacturer operates more than one location in the same city, provide the street address of the factory.

6. Date(s) and place(s) of testing

Note: Provide the date(s) of the test(s) or test report(s) and location(s) of testing.

7. Identification of any third-party laboratory who conducted the testing

Note: Provide at least the name, full mailing address, and telephone number. This section may state “N/A” for a GCC because third-party laboratory testing is not a requirement for general-use products; however, if the responsible firm uses test results from a third-party laboratory as the basis for issuing its GCC, the law requires that the certifier must then provide information pursuant to this section.		Matching

July 2025

Last checked date: 2025-07-13
Source version: N/A		August 2024: No changes

September 2024: No changes

October 2024: No changes

November 2024: No changes

December 2024: No changes

January 2025: No changes

February 2025: No changes

March 2025: No changes

April 2025: No changes

May 2025: No changes

June 2025: No changes

July 2025: No changes
4
47 CFR PART 15 - RADIO FREQUENCY DEVICESSDoC Compliance Statement (Standard)2025-07-1347 CFR PART 15: up to date as of 7/10/2025 - LinkTitle 47 > Chapter I > Subchapter A > Part 2 > Subpart J > § 2.1077 Compliance information47 CFR Part 2.1077:

If a product must be tested and authorized under Supplier's Declaration of Conformity, a compliance information statement shall be supplied with the product at the time of marketing or importation, containing the following information:

(1) Identification of the product, e.g., name and model number;

(2) A compliance statement as applicable, e.g., for devices subject to part 15 of this chapter as specified in § 15.19(a)(3) of this chapter, that the product complies with the rules; and

(3) The identification, by name, address and telephone number or Internet contact information, of the responsible party, as defined in § 2.909. The responsible party for Supplier's Declaration of Conformity must be located within the United States.

[...]		Compliance Information Statement

(1) Identification of the product, e.g., name and model number;

(2) A compliance statement as applicable, e.g., for devices subject to part 15 of this chapter as specified in § 15.19(a)(3) of this chapter, that the product complies with the rules; and

(3) The identification, by name, address and telephone number or Internet contact information, of the responsible party, as defined in § 2.909. The responsible party for Supplier's Declaration of Conformity must be located within the United States.		Matching

July 2025

Last checked date: 2025-07-13
Source version: 7/10/2025
August 2024: New eCFR version - 8/13/2024 / No template item change

September 2024: New eCFR version - 8/29/2024 / No template item change

October 2024: New eCFR version - 9/30/2024 / No template item change

November 2024: New eCFR version - 11/05/2024 / No template item change

December 2024: New eCFR version - 11/29/2024 / Main headline updated

January 2025: New eCFR version - 1/01/2025 / No template item change

February 2025: New eCFR version - 2/05/2025 / No template item change

March 2025: New eCFR version - 3/05/2025 / No template item change

April 2025: New eCFR version - 4/08/2025 / No template item change

May 2025: New eCFR version - 5/08/2025 / No template item change

June 2025: New eCFR version - 6/10/2025 / No template item change

July 2025: New eCFR version - 7/10/2025 / No template item change
5
47 CFR PART 15 - RADIO FREQUENCY DEVICESSDoC Compliance Statement (Modular)2025-07-1347 CFR PART 15: up to date as of 7/10/2025 - LinkTitle 47 > Chapter I > Subchapter A > Part 2 > Subpart J > § 2.1077 Compliance information47 CFR Part 2.1077:

§ 2.1077 Compliance information.

[...]

If a product is assembled from modular components (e.g., enclosures, power supplies and CPU boards) that, by themselves, are authorized under a Supplier's Declaration of Conformity and/or a grant of certification, and the assembled product is also subject to authorization under Supplier's Declaration of Conformity but, in accordance with the applicable regulations, does not require additional testing, the product shall be supplied, at the time of marketing or importation, with a compliance information statement containing the following information:

(1) Identification of the assembled product, e.g., name and model number.

(2) Identification of the modular components used in the assembly. A modular component authorized under Supplier's Declaration of Conformity shall be identified as specified in paragraph (a)(1) of this section. A modular component authorized under a grant of certification shall be identified by name and model number (if applicable) along with the FCC Identifier number.

(3) A statement that the product complies with part 15 of this chapter.

(4) The identification, by name, address and telephone number or Internet contact information, of the responsible party who assembled the product from modular components, as defined in § 2.909. The responsible party for Supplier's Declaration of Conformity must be located within the United States.

(5) Copies of the compliance information statements for each modular component used in the system that is authorized under Supplier's Declaration of Conformity.

[...]		Compliance Information Statement

(1) Identification of the assembled product, e.g., name and model number.

(2) Identification of the modular components used in the assembly. A modular component authorized under Supplier's Declaration of Conformity shall be identified as specified in paragraph (a)(1) of this section. A modular component authorized under a grant of certification shall be identified by name and model number (if applicable) along with the FCC Identifier number.

(3) A statement that the product complies with part 15 of this chapter.

(4) The identification, by name, address and telephone number or Internet contact information, of the responsible party who assembled the product from modular components, as defined in § 2.909. The responsible party for Supplier's Declaration of Conformity must be located within the United States.

(5) Copies of the compliance information statements for each modular component used in the system that is authorized under Supplier's Declaration of Conformity.		Matching

July 2025

Last checked date: 2025-07-13
Source version: 7/10/2025
August 2024: New eCFR version - 8/13/2024 / No template item change

September 2024: New eCFR version - 8/29/2024 / No template item change

October 2024: New eCFR version - 9/30/2024 / No template item change

November 2024: New eCFR version - 11/05/2024 / No template item change

December 2024: New eCFR version - 11/29/2024 / Main headline updated

January 2025: New eCFR version - 1/01/2025 / No template item change

February 2025: New eCFR version - 2/05/2025 / No template item change

March 2025: New eCFR version - 3/05/2025 / No template item change

April 2025: New eCFR version - 4/08/2025 / No template item change

May 2025: New eCFR version - 5/08/2025 / No template item change

June 2025: New eCFR version - 6/10/2025 / No template item change

July 2025: New eCFR version - 7/10/2025 / No template item change
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100