CEB Press Assembly Procedure
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
ABCDE
1
StepBrick Press Assembly StepsNotes
2
34Lay out Frame materials on ground.
3
33Bolt the Compression Chamber Spacers (Marshall's CAD - Part # 107) to the Vertical Frame Members
4
32Lay Vertical Frame Members on their side parallel to each other,
5
31Attach the Cylinder Mount Plate and Top Frame Plate to the Vertical Frame Members
6
30Fit Cylinder in half-frame thus created.
7
29Attach the Cylinder Mount Plate and Top Frame Plate to the Vertical Frame Members on the other side.
8
28Stand the frame with cylinder up.
9
27Attach Compression Chamber Cover Plates. This completes the Main Frame Assembly, and we're ready for the Arms and Legs.
10
26Mount Feet on all 4 Legs
11
25Insert legs into outer Leg Holders on Secondary Arms, for both the Loading Side and Ejection Side of machine.
12
24Attach both Primary Arms to Secondary Arms
13
23Raise Primary and Secondary Arms to working height, and tighten leg holders.
14
22Loosen one Primary Arm so that Main Frame Assembly can be mounted
15
21Mount the Main Frame Assembly between Primary Arms
16
20Mount Drawer in Frame
17
19Mount Drawer Table
18
18Mount Brick Ejection Table
19
17Attach Secondary Hydraulic Cylinder to Tabs on Secondary Arms and to Tabs on Drawer
20
16Attach the 4 Cam Roller Assemblies to Primary Arms
21
15Mount Hopper Seat On top of Frame
22
14Stand Rear Hopper Plate up.
23
13Bolt Hopper Sides to Rear Hopper Plate
24
12Bolt Front Hopper Plate to Hopper Sides to complete the Hopper
25
11Mount 4 Hopper Support Holders
26
10Mount 4 Hopper Supports
27
9Mount Hopper in hopper seat
28
8Mount Rear Grate Hinge on Grate Frame
29
7Mount Front Grate Hinge to Grate Frame
30
6Mount Grate Assembly on top of Hopper by bolting to the 4 Hopper Supports. Start with Rear Hopper Supports, and once these are attached, bolt on the front hopper supports.
31
5Attach Side Soil Deflectors to Grate
32
4Attach Front Soil Deflector to Grate
33
3The Shaker Assembly consists of a hydraulic motor attached to an eccentric. Attach Shaker Assembly to the Rear Hopper Supports
34
2Attach Primary Sensor Holder
35
1Attach Secondary Sensor Holder
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...