ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
2
- Only 2 people + instructor can access the Fab Lab space at the same time. Similar rule for Protopaja workshop space
3
- You can add your name in the corresponding column. Please, check that at the same time, there are no people using the same machine in the same slot
4
- Make sure that an instructor would be available for the reserved slot. If there is no Instructor name here, send email to
fablab@lists.oulu.fi and reserve 2 days beforehand.
5
- We encourage to book time for 3D printer early in the morning.
6
Please, check the Fab Lab Oulu website to get latest information about possible incidences or change in the fablab schedule. Due to GDPR we cannot collect your personal data in this Excel sheet to deliver last minute this information.
7
IMPORTANT RULES:
8
- You have to read and follow the safety instructions provided by University of Oulu (link) https://patio.oulu.fi/en/university/topical-themes/coronavirus
9
- Whenever you enter to the Fab Lab you must wash your hands
10
- After using any equipment you should clean anything you have used with a wipe and cleaning solution
11
- Keep always the safety distance of two meters
12
- Bring your own laptop. Using computers at Fab Lab is not allowed (except the ones to control the machines and only for that purpose)
13
- Before coming to Fab Lab be sure that an instructor have checked the design. Fab Lab access is only provided for the use of the equipment. Design and programming should be done outside Fab Lab premises
14
- Check that the machine that you want to use is not occuppied by other student
15
- Whenever you leave the Fab Lab you must wash your hands
16
- Since sometimes ensuring safety distance is difficult, and accordding to the new university regulations, we recommend the use of face-mask to access Fab Lab. Still social distance of 2 meters should be kept
17
18
Sindoh Printer
Stratasys Printer
19
20
21
Fab Lab Space IFab Lab Space IIProtopaja Space I Protopaja Space II
22
NameMachineNameMachineNameMachineNameMachine
23
10:00 - 11:00
24
11:00 - 12:00
25
12:00 - 13:00
26
13:00 - 14:00
27
14:00 - 15:00
28
15:00 - 16:00
29
Make sure that an instructor would be available for the reserved slot. If there is no Instructor name here, send email to
fablab@lists.oulu.fi and reserve 2 days beforehand.
30
31
INSTRUCTOR (10-16)
Mikko (10-16) mikko.toivonen@oulu.fi
32
33
34
Machines Fab Lab Space I and II:
Machines Protopaja Space I and II
35
Big Laser cutter
Electronics Workbench
36
Small Laser cutter
37
SRM-20 I
38
SRM-20 II
39
Vinyl cutter (big)
40
Sindoh Printer
41
Stratasys Printer
42
Sewing machine
43
Sand blaster
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100