Barcode/UNT Number

Print OCLC No.

Electr. OCLC No.

HT/UNT Status

Effect of interstitial atom-dislocation interactions on the deformation behavior of Columbium, Tantalum, and 1020 steel /

Fixed-base in-flight simulations of longitudinal and lateral-directional handling qualities for piloted re-entry vehicles /

Development of a Ti-Al-Cb alloy for use at 1200°-1800°F /

Tests to determine subsonic aerodynamic characteristics of hypersonic re-entry configurations /

Investigation of the effects of rapid loading and elevated temperatures on the mechanical properties of compressive and column members /

Mechanisms of friction and wear between solid surfaces /

Determination of the effects of elevated temperature materials properties of several high temperature alloys /

New cathode-anode couples using nonaqueous electrolytes /

Evaluation of new cathode-anode couples for secondary batteries /

Research to determine composition of dispersed phases in refractory metal alloys. Part 2, Concentration gradients in refractory metal binary diffusion couples /

Research to determine the composition of dispersed phases in refractory metal alloys /

Development of ultrasonic techniques for defect evaluation /

Impurity atom-dislocation interactions and subsequent effects on mechanical properties of refractory metals /

Semiconductor diode performance in nuclear radiation environments /

Cryopumping by three arrays at pressures of 10( -3) to 10( -8) mm Hg /

Investigation and flight test of ion exchange membrane fuel cells /

Allocation of system reliability. Volume 1, Development of procedures for reliability allocation and testing /

Thermal diffusivity measurements on metals and ceramics at high temperatures /

Investigation into the tungsten-rich regions of the binary systems tungsten-carbon, tungsten-boron and tungsten-beryllium. Part 1, Tungsten-carbon equilibrium system /

Establishment of the approach to, and development of, interim design criteria for sonic fatigue /

Investigation of sampled data models of the human operator in a control system /

Basic principles of the indicial lifting-surface flutter-analysis procedure /

Engineering services to store materials information data on magnetic memory tapes /

Research on materials and methods for decontamination of toxic missile propellant spillage /

Theory of the thermal conductivity of metals, alloys and semiconductors /

Theory of the thermal conductivity of metals, alloys and semiconductors /

Research and feasibility study of control logic techniques for space vehicle attitude controls /

Study of energy management techniques for a high lift vehicle. Volume I, Study of advanced energy management techniques /

Study of energy management techniques for a high lift vehicle. Volume II, Manned re-entry study /

Study on material interaction and migration in camera tubes /

Supersonic turbulent boundary layer growth over cooled walls in adverse pressure gradients /

Investigation of materials for vacuum insulation up to 4000°F /

Test device for the dynamic evaluation of aircraft fuel system materials and structures /

Effects of surface environments on the mechanical behavior of metals /

Stability and drag of parachutes with varying effective porosity /

Sulfur dioxide - sulfur trioxide. regenerative fuel cell research /

Hypersonic flow theories for predicting pressures on blunt two-dimensional and on conical shapes /

Review of hypersonic flow separation and control characteristics /

Investigation of pressure distributions over planar, twisted, and cambered wings in a hypersonic wind tunnel /

Research on heater-tension pads and high temperature heaters. Part 1, Evaluation of heater-tension pads at 500°F /

Research on heater-tension pads and high temperature heaters. Part 2, Research on materials for high temperature conduction heaters /

Design, development, and flight research of an experimental adaptive control technique for advanced booster systems /

Investigation of the effect of ultra-rapid quenching on metallic systems, including beryllium alloys /

Ultrasonic methods in the study of fatigue and deformation in single crystals /

Study and research on electronic simulation of the biological clock /

Kinetics of oxidation of refractory metals and alloys at 1000°-2000°C /

Thermodynamic and kinetic studies for a refractory materials program /

Thermodynamic and kinetic studies for a refractory materials program /

Thermodynamic and kinetic studies for a refractory materials program /

Techniques for analysis of nonlinear attitude control systems for space vehicles. Vol. 1, Characteristics of the spacecraft attitude control problem /

Techniques for analysis of nonlinear attitude control systems for space vehicles. Vol. 2, Techniques for analysis and synthesis of nonlinear control systems /

Techniques for analysis of nonlinear attitude control systems for space vehicles. Vol. 3, Examples of analytical design of space craft attitude control systems /

Techniques for analysis of nonlinear attitude control systems for space vehicles. Vol. 4, References and bibliography /

Evaluation of radiant heat flux and toxicity in Dyna-Soar - Titan II destruct tests /

Infrared spectra and vibration assignments for some organo-metallic compounds /

Role of the grain boundary in the deformation of ceramic materials /

Role of the grain boundary in the deformation of ceramic materials /

Role of the grain boundary in the deformation of ceramic materials /

Rapid method for the micro determination of carbon and hydrogen in organic compounds /

Researches on the influence of some minor constituents of the solution on hydrogen overvoltage of Cu single crystals /

Determination of engineering properties of mar-strained steels /

New approaches to flight vehicle structural vibration analysis and control /

Zero gravity separator development for regenerative fuel cell /

Investigation of stabilization and control systems for application to aero space vehicle escape capsules /

Transient vibrations of a beam with nonlinear material properties /

Physical and mechanical properties of pressure vessel materials for application in a cryogenic environment /

Electronic realization of functional nerve nets : technical documentary report /

Supplement 1

Tests to determine subsonic pressures, forces and moments acting on a hypersonic re-entry configurations /