Account Options>

  1. Sign in
Keezer Hardware Store Parts/Tools List
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
$
%
123
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
|
 
Still loading...
ABCDEFGHIJKLMNOPQRS
1
ItemQuantityNotes
2
Hardware StoreCaulk1Seal around drilled holes in wood collar and anywhere else there could be air leaking.
3
8ft 1x63Probably oak if possible.
4
Pink foam insulation22" thick. Will be glued to the inside of the collar.
5
Short wood screws < 1"100Mounting electrical boxes, L brackets etc.
6
Longer wood screws ~2.25"100Mounting the 2 and 4 ways.
7
L brackets122 per corner or 1 larger one per corner. Also 2 for the drip tray and 2 for the fan.
8
Black appliance paint3I think 3 cans will cover the whole thing.
9
1" blue painters tape1A single roll should be more than enough.
10
Plastic1To cover the larger openings while painting
11
Liquid nail2Heavy Duty. For securing collar to freezer and insulation to collar.
12
15 Amp Outlet1For plugging freezer into.
13
15 Amp GFCI outlet1Protection for the keezer. Replace outlet it will be plugged into.
14
Electrical box1For the outlet above.
15
15 Amp wire1Running from temp controller to outlet. 25ft chunk.
16
Flexible 2-wire applicance cord125ft is more than enough.
17
10ft suicide cord with ground (15 Amp)1From outlet to temp controller.
18
Shallow 4x4 electrical box1Wiring near the temp controller.
19
4x4 box cover1To cover the electrical box
20
Wire nuts1Assorted size bag should be fine
21
Outlet cover1Stainless steel
22
Sealer1There are some other things that go with this. Applicator, gloves, mask, etc.
23
Multi-colored electrical tape66 different colors, one for each tap.
24
Spray foam2Only used 1 but good to have extra
25
14.8 cu ft chest freezer1This will hold 6 kegs plus the CO2 nicely.
26
Hardware for hinges8Bolts, washers, lock nuts. Quantity varies depending on the freezer. I needed 8 sets total.
27
28
29
AmazonSTC-1000 temp controller1Controlling the outlet in the rear plus the fan.
30
120V fan1To circulate the air in the keezer.
31
Small dehumidifier1Non-electric to minimize moisture in the keezer.
32
33
34
Austin HomebrewBall lock disconnects - gas6MFL type with 1/4" FFL fitting
35
Ball lock disconnects - beer6MFL type with 1/4" FFL fitting
36
Shanks6With 1/4" fitting kit
37
Taps6With basic handles for now
38
1/4" gas line100100ft should be plenty
39
3/16" thick wall beer line100100ft here also
40
Hose clamps404 per tap plus 4 for the splitters and regulator
41
Double body CO2 regulator1Dual outputs
42
Ball lock corny kegs6New or used.
43
20lb CO2 tank1Probably overkill but less trips to get it filled
44
4-way CO2 splitter1
45
2-way CO2 splitter1
46
19" drip tray1Still not sure how to secure it to the front.
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
Loading...
 
 
 
Sheet1