PRINT SETTINGS.xlsx

	A	B	C	D	E	F	G	H	I	J	K	L	M	N	O	P
1
2				All setting below refer to parts printed in 0.2 layer height. If another layer height is used, adjust Support Top Distsance and Support Bottom Distance to be twice the layer height used.
3	PRINT ORIENTATION	STL CONFIRMED		Part name description	Part number	Quantity	Material	Infill percentage	Shell Walls	Support type	Layer height 0.2mm	Minimum support area	Support Top Distsance	Support Bottom Distance	Minimum Support X/Y Distance	Support Density
4							Preferred material mentioned first						Keep the below support settings across all of your prints. Only turn on/off supports as needed per part. A brim of 1.2-1.6mm is recommended.
5	UPDATED	STL CHECKED	1	001 - FRONTPLATE V3.6	001	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
6	UPDATED	STL CHECKED	2	002 – SLIDING RACK BASE	002	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
7	UPDATED	STL CHECKED	3	002A – FRONT BEARING MOUNT	002A	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
8	UPDATED	STL CHECKED	4	002SR – SLIDING RACK	002SR	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
9	UPDATED	STL CHECKED	5	002PBM – PIVOT BALL MOUNT	002PBM	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
10	UPDATED	STL CHECKED	6	002TSF – TOWER SPACER FRONT	002TSF	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
11	UPDATED	STL CHECKED	7	002TSR – TOWER SPACER REAR	002TSR	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
12	UPDATED	STL CHECKED	8	002P – SLIDING RACK PUSH PLATE	002P	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
13	UPDATED	STL CHECKED	9	003 - MID PLATES V3.6	003	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
14	UPDATED	STL CHECKED	10	004B - BOTTOM CHASSIS V3.64 BACK	004B	1pc	PLA/PETG/ABS	23% min/25% max	8	Support everywhere			0,4	0,4	0,7	25
15	UPDATED	STL CHECKED	11	004C – CHASSIS CONNECTOR	004C	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
16	UPDATED	STL CHECKED	12	004F - BOTTOM CHASSIS V3.64 FRONT	004F	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
17	To Do	To Do	13	004 - BOTTOM CHASSIS V3.5 for 30x30 bed	004	optional	PLA/PETG/ABS	23% min/25% max	8	Support everywhere			0,4	0,4	0,7	25
18	Same as v3.5	Same as v3.5	14	005 - MOTOR BACK BRACKET V3.5.2	005	1pc mirrored (read comment)	ABS/PTEG/PLA	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
19	Same as v3.5	Same as v3.5	15	006B - MOTOR MOUNT V3.5.1_B	006B	1pc mirrored (read comment)	ABS/PTEG/PLA	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
20	Same as v3.5	Same as v3.5	16	007 - MOTOR MOUNT SPACER 52MM	007	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
21	UPDATED	STL CHECKED	17	009F - FRONT SERVO MOUNT UNIVERSAL	009F	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
22	UPDATED	STL CHECKED	18	009R - REAR SERVO MOUNT REVED	009R	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
23	not yet updated	not yet checked	19	009HD - SERVO MOUNT V3.5	009HD	optional (read comment)	PLA/PETG/ABS	24% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
24	UPDATED	STL CHECKED	20	013DP – DRIVESHAFT PROTECTORS	013DP	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
25	UPDATED	STL CHECKED	21	013N - DIF PLATE V3.66	013N	1pc and 1pc mirrored	ABS/PTEG/PLA	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
26	UPDATED	STL CHECKED	22	014U - DIFF UPPER SPACER WITH ESC MOUNT	014U	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
27	UPDATED	STL CHECKED	23	015N - DIF TENSIONER V3.64	015N	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
28	UPDATED	STL CHECKED	24	016F - 3MM ARM SHAFT FRONT SUPPORT	016F	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
29	UPDATED	STL CHECKED	25	016R - 3MM ARM SHAFT REAR SUPPORT	016R	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
30	UPDATED	STL CHECKED	26	017U - REAR SUSPENSION UPPER ARM	017U	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
31	UPDATED	STL CHECKED	27	017L - REAR SUSPENSION LOWER ARM	017L	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
32	UPDATED	STL CHECKED	28	020N - REAR BRIDGE V3.61	020N	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
33	UPDATED	STL CHECKED	29	025RA – REAR HUB ARM	025RA	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
34	UPDATED	STL CHECKED	30	025R – REAR HUB	025R	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
35	UPDATED	STL CHECKED	31	025FA - FRONT HUB ARM	025FA	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
36	UPDATED	STL CHECKED	32	025F - FRONT HUB	025F	2pcs	PLA/PETG/ABS	24% min/25% max	8	Support not needed			0,4	0,4	0,7	25
37	UPDATED	STL CHECKED	33	026SS – SPACER SET	026SS	4sets	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
38	UPDATED	STL CHECKED	34	026 – LOWER FRONT ARM	026	2pcs	PLA/PETG/ABS	25% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
39	UPDATED	STL CHECKED	35	026E – END STOP	026E	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
40	UPDATED	STL CHECKED	36	027A - UPPER FRONT ARM FOR 195MM BODY A (read comment)	027A	optional	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
41	UPDATED	STL CHECKED	37	027B - UPPER FRONT ARM FOR 195MM BODY B (read comment)	027B	optional	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
42	UPDATED	STL CHECKED	38	027C - UPPER FRONT ARM FOR 195MM BODY C (read comment)	027C	1pc and 1pc mirrored	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
43	UPDATED	STL CHECKED	39	027WA - UPPER FRONT ARM FOR 200MM BODY A (read comment)	027WA	optional	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
44	UPDATED	STL CHECKED	40	027WB - UPPER FRONT ARM FOR 200MM BODY B (read comment)	027WB	optional	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
45	UPDATED	STL CHECKED	41	027WC- UPPER FRONT ARM FOR 200MM BODY C (read comment)	027WC	optional	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
46	UPDATED	STL CHECKED	42	029 - CASTER SIMS	029	6pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
47	Same as v3.5	Same as v3.5	43	030 - M3 NUT HUB LONG	030	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
48	UPDATED	STL CHECKED	44	032 - SERVO HORN	032	1PC	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
49	UPDATED	STL CHECKED	45	032B - SERVO HORN BOTTOM	032B	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
50	Same as v3.5	Same as v3.5	46	033 - MIDPLATE SPACERS V3.5	033	1set (4pcs)	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
51	UPDATED	STL CHECKED	47	1611 - 16t GT2 SPACER 51365	1611	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
52	UPDATED	STL CHECKED	48	1612 - 16t GT2 SPACER 51328	1612	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
53	UPDATED	STL CHECKED	49	1613 - 16t GT2 SPACER 5810	1613	2pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
54	UPDATED	STL CHECKED	50	481 - 48t GT2 SPACER 10186	481	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
55	UPDATED	STL CHECKED	51	201F – MAGNET HEX POST V3.6	201F	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
56	UPDATED	STL CHECKED	52	201R – REAR MAGNET HEX POST V3.6	201R	2pcs	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
57	UPDATED	STL CHECKED	53	260F - FRONT BODY POST MOUNT	260F	1pc	PLA/PETG/ABS	23% min/25% max	8	Support touching builtplate			0,4	0,4	0,7	25
58	UPDATED	STL CHECKED	54	260R – REAR BODY POST MOUNT	260R	1pc	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
59	2025 rev1 UPDATED AND NEW PARTS
60	UPDATED	STL CHECKED	55	002PBM_362 -PIVOT BALL MOUNT 3.62	002PBM_362	optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
61	UPDATED	STL CHECKED	56	002SR_362 - SLIDING RACK V3.62	002SR_362	optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
62	UPDATED	STL CHECKED	57			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
63	UPDATED	STL CHECKED	58			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
64	UPDATED	STL CHECKED	59			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
65	UPDATED	STL CHECKED	60			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
66	UPDATED	STL CHECKED	61			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed			0,4	0,4	0,7	25
67	UPDATED	STL CHECKED	62			optional part	PLA/PETG/ABS	23% min/25% max	8	Support not needed
68	Report any issue at nikolaospozatzidis@gmail.com using as Subject: rc files issue
69	Suggest “nice to have” features or components using as Subject: rc part/feature request
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100