For joining O3

	B	C	D	E	F	G	H
1	Preparation for joining O3 through Engineering Runs
2
3
4
5
6
7
8				target: +
9				done: o
10	Over all
11	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
12	Shift Manual		Miyakawa			2019/5/28	2019/5/28
13	Shift assignment					2019/5/28	2019/5/28
14	Log book		Miyakawa	o		2019/5/28	2019/6/6
15	Observation log system		Oshino			2019/5/28	2019/5/28
16	Definition of observation	Observation intent (GRD) switch and Observing flag	Yamamoto	+		2019/6/5	2019/6/5
17
18
19	Commissioning
20	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
21	Arm cavity mass lock					2019/6/5	2019/6/5
22	DRMI lock					2019/6/5	2019/6/5
23	DRFPMI lock					2019/6/5	2019/6/5
24	ASC for DRFPMI					2019/6/5	2019/6/5
25	(Semi-)automated initial alignment procedure					2019/6/5	2019/6/5
26	Locking automation / automatic lock-loss detection					2019/6/5	2019/6/5
27	Noise budget					2019/6/5	2019/6/5
28	Increase power to ~ 10Watt					2019/6/5	2019/6/5
29	10MPc sensitivity					2019/6/5	2019/6/5
30
31
32	MIF
33	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
34	Main interferometer			+		2019/5/29	2019/5/29
35	Analog and digital circuits to control the interferometer			+		2019/5/29	2019/5/29
36	Output optical tables and covers			+		2019/5/29	2019/5/29
37	Beam shutters around OMC					2019/5/29	2019/5/29
38	High power beam dump at REFL table					2019/5/29	2019/5/29
39	Correct OSTM					2019/5/29	2019/5/29
40	OMMT1 and OMMT2 safety guard					2019/5/29	2019/5/29
41	KOACH, FFU, and AC operation					2019/6/10	2019/6/10
42	IMC ASC modification					2019/6/10	2019/6/10
43
44	IOO
45	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
46	Making the shift manual			+		2019/5/26	2019/5/26
47	Modification of the guardian of IO			+		2019/5/26	2019/5/26
48	IMC commissioning (noise budget and noise hunting)					2019/5/26	2019/5/26
49	OMC commissioning					2019/5/26	2019/5/26
50	Long term stability check of the HPIO (~20W at the output of the IMC)					2019/5/26	2019/5/26
51	prepare the laser status panel (MEDM)			+		2019/5/26	2019/5/26
52	install the emergency button			+		2019/5/26	2019/5/26
53	install the temperature monitor for the high power beam dump at PRM			+		2019/5/26	2019/5/26
54
55
56	OMC
57	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
58	manufacture a spare pd mount to train a pd replacement					2019/5/27	2019/5/27
59	replace qpd drivers					2019/5/27	2019/5/27
60	replace pzt drivers					2019/5/27	2019/5/27
61	perform an analog beam shutter					2019/5/27	2019/5/27
62	implement digital ostm miscentering for slow beam shut					2019/5/27	2019/5/27
63	lock the omc with a decent amount of dc beam from mif					2019/5/27	2019/5/27
64	measure the omc finesse					2019/5/27	2019/5/27
65	perform an alignment control with qpds					2019/5/27	2019/5/27
66	perform an alignment control with dc pds					2019/5/27	2019/5/27
67	lock the omc with a central michelson or drmi					2019/5/27	2019/5/27
68	perform the alignment controls					2019/5/27	2019/5/27
69	measure and reduce noise					2019/5/27	2019/5/27
70	put more beam dumps if necessary					2019/5/27	2019/5/27
71	lock the mi/drmi/fpmi with a signal from omc					2019/5/27	2019/5/27
72	operate the omc in vacuum					2019/5/27	2019/5/27
73
74
75	VIS
76	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
77	Hierarchical control of Type-A (with CRY)			+		2019/5/27	2019/5/27
78	Improved watchdog					2019/5/27	2019/5/27
79	IP control with/without inertial damping for Type-A			+		2019/5/27	2019/5/27
80	IP control with/without inertial damping for Type-B			+		2019/5/27	2019/5/27
81	Guardian					2019/5/27	2019/5/27
82	Status monitor screens					2019/5/27	2019/5/27
83	Operation manuals					2019/5/27	2019/5/27
84	L2P diagonalization for all the suspensions					2019/5/27	2019/5/27
85	Automatic off-load system					2019/5/27	2019/5/27
86
87	AEL
88	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
89	Switching the +/-18V power line for the racks to the newly laid cables.				+	2019/5/27	2019/5/27
90	GND check of the electronics. Especially, check if the GND is properly connected to the rack.	However, we should not touch the electronics as long as they are working fine.				2019/5/27	2019/5/27
91
92
93	DGS
94	task name	description/comments	Rersponsible Person	6/8	7/13	registered date	last update
95	Replace RTFE to faster one			+	+	2019/5/26	2019/7/8
96	Replace power supply of IO chassis from ATX AC-DC to stable DC-DC			+	+	2019/5/26	2019/7/8
97	Add BIO, ADC, DAC cards to IO chassis			o		2019/5/26	2019/7/8
98	Recording time of one frame file change to 64 seconds					2019/5/26	2019/5/26
99	Add 20TB storage to frame writer				o	2019/5/26	2019/7/8
100	Fix daq trouble on k1dc0					2019/7/8	2019/7/8