ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
REFIDSysNameCommonTermDescriptiongpsDiscPART
CODE10
ENUM_VALUESEnum_Descriptions
CodeAssign1
Table
CommentExamplesPrimaryUses
2
MDCX_INFUS_ORDER_STEP_START_CONDITIONDetermines whether the step starts auomatically or waits for user confirmation.11(0)1New term with 2 enumerations
"immediate" or "pause-for-confirmation”
3
MDC_ENUMGV_INFUS_ORDER_STEP_START_CONDITION__immediateimmediateAn infusion order step that begins immediately after the previous step completes.
4
MDC_ENUMGV_INFUS_ORDER_STEP_START_CONDITION__pause-for-confirmationpause-for-confirmationAn infusion order step that waits for user configmration after the previous step completes before starting the next step.
5
MDC_ENUMGV_INFUS_ORDER_TYPE (existing group)Add 3 new enums to existing group
6
MDC_ENUMGV_INFUS_ORDER_STEP_TYPE__delay 11(0)1delayAn infusion order step where the fluid or medication is paused for a specified duration until the start of the next infusion step.add enum "delay" to MDC_INFUS_ORDER_STEP_TYPE
7
MDC_ENUMGV_INFUS_ORDER_TYPE__pca-dose11(0)1pca-doseAn infusion order type for a patient-initiated bolus in addition to the base infusion. (e.g., PCA/PCEA).add enum "pca-dose" to MDC_INFUS_ORDER_TYPE
8
MDC_ENUMGV_INFUS_ORDER_TYPE__intermittent-dose11(0)1intermittent-doseAn infusion order type for a programmed bolus in addition to the base infusion.add enum "intermittent-dose" to MDC_INFUS_ORDER_TYPE
9
MDC_ENUMGV_PUMP_PROGRAM_COMPLETION_MODE (existing group)Add new enum to existing group
10
MDC_ENUMGV_PUMP_PROGRAM_COMPLETION_MODE__pump-program-completion-mode-switch-source11(0)1pump-program-completion-mode-switch-sourceWhen the program has completed running a secondary the pump will automatically switch to the primary.None of the currently defined values address the case where a pump that is running a secondary will automatically switch to the primary when the secondary is complete. add new enum for completion mode for switching sources pump-program-completion-mode-switch-source to MDC_PUMP_PROGRAM_COMPLETION_MODE
11
MDCX_PUMP_VOL_DELIV_DISPLAYED 11(0)1Epic investigating how this would be used.
12
MDCX_DRUG_IS_IN_LIBRARYDrug is in libraryBoolean value indicating if the currently programmed drug is in the drug library
If not present, then consider it as 'not known'
11(0)1Rationale: Manually programmed drugs will always be in the drug library, but auto-programmed drugs may not be if they are experimental or the drug library has not been updated to include the new drug(s). It is important to know if drugs outside of the library are being administered, since those drugs will not have limits enforced
13
MDCX_INFUS_ORDER_IDOrder IDThe Placer Order Number (ORC-2) representing the parent/child infusion order ID of this infusate source.
14
MDCX_TIME_PD_DOSE_PCAPCA Patient Dose DurationDuration of PCA Dose for a single patient request.

15
MDCX_TIME_PD_DOSE_LOADINGLoading Dose DurationDuration of delivery of a loading dose.
16
MDCX_TIME_PD_DOSE_CLINICIANClinician Dose DurationDuration of delivery of a clinician dose.

17
MDCX_TIME_PD_CLINICIAN_DOSE_LOCKOUT_INTERVALClinician Dose LockoutMinimum time period between delivery of clinician doses
18
MDCX_RATE_DOSE_INTERMITTENTIntermittent Dose RateProgram setting for dose or flow rate for delivery of an intermittent dose.
19
MDCX_TIME_PD_DOSE_INTERMITTENTIntermittent Dose DurationDuration of delivery of an intermittent dose.
20
BD Terms
21
MDCX_BASE_CONC_DRUG  (base concentration for medication)This is already covered by MDC_CONC_DRUG for the reduced concentation.
MDC_DRUG_AMOUNT (158152) and MDC_VOL_FLUID_DILUENT (157868) are available to report the drug amount and volume.
Also MDC_SUBST_DILUENT (184484) if needed.
22
MDCX_EVT_CHANNEL_COMMS_LOST (error/alarm for module loss of signal)
23
MDCX_EVT_CHECK_DISPOSABLE (alarm for disposable not seated properly)MDC_EVT_COMPONENT_POSN_PROB - Supply or disposable positioning problem.
24
25
MDCX_EVT_PAUSE_EXCEEDED  (alarm - infusion module paused longer than allowed)
26
MDCX_EVT_RESTART_CHANNEL (alarm - infusion module needs to be restarted)
27
MDCX_PCA_MONITORING_ALARM (alarm - pca paused due to resp rate too low)
28
MDCX_PCA_PAUSE_PROTOCOL_RESTART (alarm - pca should be restarted after pause due to monitoring alarm)
29
30
MDCX_ALARM_INACTIVATION_REASON
31
32
MDCX_PRESS_BLD_DIA_MAX
33
MDCX_PRESS_BLD_DIA_MIN
34
MDCX_PRESS_BLD_MEAN_MAX
35
MDCX_PRESS_BLD_MEAN_MIN
36
MDCX_PRESS_BLD_SYS_MAX
37
MDCX_PRESS_BLD_SYS_MIN
38
39
MDCX_PRESS_BLD_NONINV_DIA_CTS_MAX
40
MDCX_PRESS_BLD_NONINV_DIA_CTS_MIN
41
MDCX_PRESS_BLD_NONINV_MEAN_CTS_MAX
42
MDCX_PRESS_BLD_NONINV_MEAN_CTS_MIN
43
MDCX_PRESS_BLD_NONINV_SYS_CTS_MAX
44
MDCX_PRESS_BLD_NONINV_SYS_CTS_MIN
45
46
Bbraun
47
MDCX_EVT_PUMP_BOLUS_COMPLETE
48
MDCX_BOLUS_IDENTIFIER, ST
49
MDCX_DIAM_SYRINGE, NM, units = mmInner or outer diameter? Should have both.
50
MDCX_NUM_PATIENT_DOSES_GIVEN_SINCE_LAST_COUNTER_RESET, NM, unitlessMDC_NUM_PATIENT_DOSES_GIVEN_TOTAL
1. Cumulative number of patient doses actually delivered (since start of operation or last cleared by clinician).
2. Cumulative number of patient doses delivered since the start of the program.
51
MDCX_NUM_PATIENT_DOSES_ATTEMPTED_SINCE_LAST_COUNTER_RESET, NM, unitlessMDC_NUM_PATIENT_DOSES_ATTEMPTED_TOTAL
1. Cumulative number of patient doses requested.(since start of operation or last cleared by clinician).
2. Cumulative number of patient doses requested since the start of the program.
52
MDCX_DOSE_INTERMITTENT_LIMIT, NM, units = dose units
53
MDCX_TIME_PD_INTERMITTENT_DOSE_LIMIT, NM, units = sec, min, hr  Similar to existing MDC_DOSE_PCA_LIMIT / MDC_TIME_PD_PCA_DOSE_LIMIT
54
MDCX_DOSE_DRUG_DELIV_WITHIN_LIMIT_TIME_PD, NM, units = dose units
55
MDCX_DRUG_COLOR, ST  (aka Drug Color Label)  Value:  index into color label table, which identifies the background for drug name field on the pump display based on drug category
  Drug category examples:  Opioids, Vasopressors, Coagulants, Anticoagulants
  Used only in PCD04, conditionally included based on AM config setting
56
MDCX_DRUG_URGENCY, ST  (aka Drug Alarm Urgency)  Values:  PL, PM, PH, PN
Used only in PCD04, conditionally included based on AM config setting
  Set on per-drug basis as part of drug library build
  Different than alarm priority, which is based upon category of alarm (Operating and Device Alarm = PH, Reminder, Caution and Pre-alarm = PL)
57
MDCX_CONC_ID_DRUG, ST  Concentration identifier, set on per-concentration basis as part of drug library build, must be unique across entire library
58
MDCX_PAIN_SCORE, NM, unitless  Values:  0-10, -1 for unknownReplace with unique name for each method
59
MDCX_PAIN_METHOD^MDC, ST  Values:  NUMERIC, FLACC, CRIES, WONG_BAKERReplace with unique name for each method
60
MDCX_PAIN_SCORE_CRITERIA^MDC, NA, unitless  Value based on pain method:
NUMERIC: n/a, so this OBX not included in PCD-01/-10
FLACC: Five values, one each for Face, Legs, Activity, Cry, and Consolability, with range of 0-2 for each
CRIES: Five values, one each for Crying, Requires Increased Oxygen Administration, Increased Vital Signs, Expression, and Sleepiness, with range of 0-2 for each
WONG_BAKER: n/a, so this OBX not included in PCD-01/-10
61
MDC_PAIN_LEVEL_NIRS_11The numeric rating scale (NRS-11) is an 11-point scale for the patient self-reporting of pain. The pain level is devided in 4 ranges: 0 = no pain; 1 - 3 = mild pain; 4 - 6 = moderate pain; 7 - 10 = severe pain.
62
MDC_SCORE_PAIN_LEVEL_FLACCFLACC: Five values, one each for Face, Legs, Activity, Cry, and Consolability, with range of 0-2 for eachUse Multiple values like rack reporting or a CWE?
Face^Legs^Activity^ Cry^Consolability^Total
1^1^2^1^1^6
Do we want one MDC for total and another for criteria
63
MDC_SCORE_PAIN_LEVEL_CRIESCRIES: Five values, one each for Crying, Requires Increased Oxygen Administration, Increased Vital Signs, Expression, and Sleepiness, with range of 0-2 for each
64
MDC_SCORE_PAIN_LEVEL_WONG_BAKERWONG_BAKER:
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100