| A | B | C | D | |
|---|---|---|---|---|
1 | Preferences | Must be set in prefs.csv or via QMP | ||
2 | prefs.csv | Can be changed with voice command, or game configuration file's Preferences sheet | ||
3 | Preference | Value | Units | Can be changed on Mode sheet, Voice Command or Preferences sheet. |
4 | joystick_deflection_minimum | 2 | percent | Defines center dead zone. Percent of physical movement |
5 | joystick_deflection_maximum | 20 | percent | Defines physical deflection scaled to 100% Signal |
6 | deflection_multiplier_up | 100 | percent | Adjusts joystick deflection value in the UP direction |
7 | deflection_multiplier_down | 100 | percent | Adjusts joystick deflection value in the DOWN direction |
8 | deflection_multiplier_left | 100 | percent | Adjusts joystick deflection value in the LEFT direction |
9 | deflection_multiplier_right | 100 | percent | Adjusts joystick deflection value in the RIGHT direction |
10 | joystick_dead_zone_shape | 1 | 0=Square, 1=Circle | |
11 | anti_dead_zone | 0 | percent | Counteracts the dead zone built into the Game Console's joystick software |
12 | joystick_warning | 500 | percent | Joystick position beyond full scale that will flash the leds |
13 | joystick_alarm | 600 | percent | Joystick position beyond full scale that will buzz the speaker |
14 | usb_1_dead_zone | 20 | percent | Controls how far the external joystick must be moved to produce an output |
15 | usb_1_multiplier_up | 100 | percent | Adjusts a USB input sensitivity in one direction |
16 | usb_1_multiplier_down | 100 | percent | Adjusts a USB input sensitivity in one direction |
17 | usb_1_multiplier_left | 100 | percent | Adjusts a USB input sensitivity in one direction |
18 | usb_1_multiplier_right | 100 | percent | Adjusts a USB input sensitivity in one direction |
19 | usb_2_dead_zone | 20 | percent | Controls how far the external joystick must be moved to procduce an output |
20 | usb_2_multiplier_up | 100 | percent | Adjusts a USB input sensitivity in one direction |
21 | usb_2_multiplier_down | 100 | percent | Adjusts a USB input sensitivity in one direction |
22 | usb_2_multiplier_left | 100 | percent | Adjusts a USB input sensitivity in one direction |
23 | usb_2_multiplier_right | 100 | percent | Adjusts a USB input sensitivity in one direction |
24 | joystick_D_Pad_inner | 25 | percent | Inner Zone Ring as percent of scaled Signal |
25 | joystick_D_Pad_outer | 60 | percent | Outer Zone Ring as percent of scaled Signal |
26 | sip_puff_threshold_soft | 8 | percent | Percent of full scale Pressure to detect Soft Sip/Puff |
27 | sip_puff_threshold | 40 | percent | Percent of full scale Pressure to detect Hard Sip/Puff |
28 | sip_puff_maximum | 70 | percent | Percent of full scale Pressure to scale into 100% button push pressure |
29 | sip_puff_delay_hard | 1000 | ms | Time delay before detecting Hard Sip/Puff on the side tube |
30 | sip_puff_delay_soft | 1000 | ms | Time delay before detecting Soft Sip/Puff or Inner Joystick Zone |
31 | lip_position_minimum | 8 | percent | Percent of full scale of lip movement to initiate output |
32 | lip_position_maximum | 35 | percent | Percent of full scale of lip movement for 100% output |
33 | mouse_speed | 150 | percent | Speed control for mouse cursor movement |
34 | mouse_response_curve | 2 | 0=linear, 1=mixed curve, 2=parabolic | |
35 | volume | 40 | percent | Initial Speaker Volume |
36 | brightness | 75 | percent | Initial Status LED brightness |
37 | digital_out_1 | 0 | on/off | Initial output state for relay 1 |
38 | digital_out_2 | 0 | on/off | Initial output state for relay 2 |
39 | bluetooth_device_mode | none | Bluetooth HID Device Selection | |
40 | bluetooth_authentication_mode | 2 | Bluetooth Authentication Selection | |
41 | bluetooth_connection_mode | pair | Bluetooth pairing control | |
42 | bluetooth_throttle | 15 | ms | Bluetooth mouse report interval in ms. |
43 | enable_swap_inputs | 0 | Allow user to swap inputs with Lip sensor | |
44 | enable_left_side_tube | 0 | Swaps center mouthpiece and mode tube sensors when using mode tube on the left side. | |
45 | enable_select_files | 1 | Allow user to select a configuration file | |
46 | enable_usb_a_host | 1 | Enable Host mode support for devices plugged into USB-A | |
47 | enable_usb_a_device | 0 | DO NOT CHANGE | 1=USB-A port active in Device mode, 0=USB-B port active |
48 | enable_DS3_emulation | 0 | DO NOT CHANGE | 0=Normal PS3 mode, 1=DS3 emulation, 2=X360CE mode, 3=XB360 emulation, 4=PS4, 5=Nintendo Switch |
49 | enable_rumble | 0 | 1=Buzz when Rumble activated, 0=silent. Requires DS3=1 | |
50 | titan_two | 0 | 0=Not using Titan 2, 1=Using Titan 2 with PS4/PS5 |