ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
[]]
2
GT Sheet
Red cell = Over or under scale by 3mm or more for any dimensions except front width,
Yellow cell = Over or under scale between 2.5mm and 3mm, or under scale by 3mm or more for front width. 1:1 references often only provide maximum widths, and front widths can be narrower than rear widths on GT cars.
3
4
LMP Sheet
Red cell = Over or under scale by 3mm or greater,
Yellow cell = Over or under scale by between 2.5mm and 3mm.
5
6
General
Only DiSCA WEC ruleset requires bodies to be within +/- 3mm scale.
DiSCA GT3 Euroseries does not have scale accuracy requirements and is created around RTR slot cars.
Height measurements cannot be 100% accurate due to variable ride heights on both 1:1 and 1:32 scale cars. Ride height is a sensitive variable. Height is also a difficult value to obtain for many 1:1 references. A red height box may mean the value is missing, or may mean it is measured outside of tolerance but impossible to accurately verify. Red boxes in 1:1 car data section signify missing data (often for LMP cars).

RED BOXES DO NOT NECESSARILY MEAN ILLEGAL!!! This is a reference library only.
7
8
Methods
9
Height: Measure from the chassis pan to the highest point of the roof (or otherwise), ignoring wheels, tyres, guide or braid
10
Wheelbase: Measure from the outermost edges of the front and rear wheels, then subtract the diameter of one wheel from the measurement. For cars with different sized front and rear wheels, measure from the outermost edges of the front and rear axels, then subtract the diameter of the axel from the measurement.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100