Filament Properties.
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
2
3
PropertyValueUnit
4
Mechanical
5
Tensile Strength, Yield.51.5MPa
6
Flex Modulus2100MPa
7
Elongation to break115%
8
Izod impact (Notched)84J/m
9
Mold Shrink (Transverse)0.25%
Probably omit this data point, revealing and not needed.
10
Density1.26g/cc
11
ThermalTg70C
12
Bed Temp80C
13
Nozzle Temp240C
14
FanModerateGeneralPolymerPET/Copolyester blend with additives.
15
StorageKeep DRY. Drier filament = Stronger prints that are much more impact resistent, with better surface finish and generally prints better with improved surface finish. If filament is exposed to moisture the material can be dried at 50-60C. A heated bed and a bag with dessicant makes a decent makeshift filament warmer. Dry for 6 hours or more, longer is better.
16
Bed AdhesionGlue stick. Edge has already been adhesion modified, so using aggressive coatings like Dimafix, Wolfbite and other 3D printing specific bed surfaces will result in parts sticking so well they pull off chunks of glass.
17
Other ramblings
This stuff is designed to STICK, to itself, to Scaffold soluble support material, to the print bed. This is intentional but can cause it to stick to the nozzle a bit more than we'd like. We're working on a solution for this.
18
Other thoughts, such as it bridges and overhangs well. Support material sticks to it a lot so more separation maybe good.
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...