| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | CarnyRex Flintlock Pistol/Axe/Carbine: Print & Hardware Guide | ||||||||||||||||||||||||||
2 | Looking for the musket build guide instead? You can find that here: https://docs.google.com/spreadsheets/d/1u9mxM6vdB7DCNMBZCn1wJmmVDWAZ4hR5tSQ1wr4sgvg/edit?usp=sharing | ||||||||||||||||||||||||||
3 | How to use this guide | ||||||||||||||||||||||||||
4 | 1. Make sure you have the .STL files for the CarnyRex flintlock nerf blaster. You can get those here: https://www.etsy.com/shop/CarnyRex | ||||||||||||||||||||||||||
5 | 2. Print out everything in the Core subassembly, then pick a Stock & and a Barrel option from the table below (Some barrel options may replace parts of the Core print, like the ramrod). | ||||||||||||||||||||||||||
6 | 3. If you are not sure about a setting, or something seems wrong, reach out to: CarnyRex@gmail.com I'd be happy to answer any questions / update this guide. | ||||||||||||||||||||||||||
7 | 4. After you've printed out everything, go to https://youtu.be/UMsmsa-9YsM to watch the assembly guide! | ||||||||||||||||||||||||||
8 | Parts | Recommended print settings | |||||||||||||||||||||||||
9 | Folder | Sub_assembly | Part | Quantity | Update link | Pallette | Resolution (mm) | Walls (mm) | Infill | Supports? | Brim? | Slicing/ printing notes | |||||||||||||||
10 | Core parts | Core - Print everything here, unless you are using a barrel option that lists a replacement part (e.g. rails, ramrod) - The spring you use for the catch can be anything that roughly fits, you don't need to find a specific one. I often steal the springs inside click-pens. | Stock_mid_v2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Wood / Brown | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||
11 | Ramrod | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
12 | Barrel_muzzle | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
13 | Barrel_tang | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | Yes | If you experience a baad overhang on this part, use a support with an X-y distance of 0.4 or less | |||||||||||||||||
14 | Butt_cap | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
15 | Butt_ring | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
16 | Butt_ring_holder | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
17 | Catch_block | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
18 | Catch_sear | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
19 | Catch_trigger_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | This part has a small overhang which prints best with some supports despite not being a steep angle. Use a small minimum support area to ensure you catch it! | |||||||||||||||||
20 | Lock_bridle_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
21 | Lock_flint | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
22 | Lock_frizzen | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | This part has a small overhang which prints best with some supports despite not being a steep angle. Use a small minimum support area to ensure you catch it! | |||||||||||||||||
23 | Lock_frizzen_spring | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
24 | Lock_hammer_A | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
25 | Lock_hammer_B | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
26 | Lock_hammer_jaw | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | This still works at 0.2 layer height, but will look much better this way | |||||||||||||||||
27 | Lock_hammer_jaw_screw_A_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Metal / Grey | 0.2 | 1.2 | 18% | No | No | This still works at 0.2 layer height, but will look much better this way | |||||||||||||||||
28 | Lock_hammer_jaw_screw_B | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | This still works at 0.2 layer height, but will look much better this way | |||||||||||||||||
29 | Lock_mainspring | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | Yes | ||||||||||||||||||
30 | Lock_pan | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
31 | Lock_plate | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
32 | Lock_sear_A | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
33 | Lock_sear_B | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
34 | Lock_tumbler | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
35 | Lock_tumbler_key | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
36 | Lock_sear_spring_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
37 | Rail_bottom | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
38 | Rail_head | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
39 | Rail_top | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
40 | Ramrod_head_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
41 | Sideplate | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
42 | Sled_rival | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
43 | Sled_with_post | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
44 | Ramrod_guide_front | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
45 | Stock_ring_V2 | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
46 | Trigger_guard | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
47 | No.32 Rubber band (3mm wide, 76mm long) | 4 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
48 | M5 x 10mm (Pan head, Slot) | 11 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
49 | M5 x 20mm (Pan head, Slot) | 7 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
50 | M5 x 30mm (Pan head, Slot) | 6 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
51 | M5 x 60mm (Pan head, Slot) | 2 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
52 | M5 hex nut (optional) | 1 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
53 | 2cm x 1cm Spring | 2 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
54 | Stock options . | Stock options Pick one! High infill is necessary for strength. Some have been moved to the legacy folder to keep the zip size down. The biggest shoulder stock (Shoulder_stock_fancy) has it's own subfolder here. It *also* has a split version that uses the same settings "Nut" versions of these files have a slot for an additional M5 Hex nut, which will make the join with the rest of the stock stronger. | Stock_grip | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||
55 | Stock_longhandle | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
56 | Stock_grip_Nut | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
57 | Stock_longhandle_Nut | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
58 | Stock_grip_Nut | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
59 | Stock_shoulder_basic | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
60 | Stock_shoulder | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Wood / Brown | 0.2 | 1.2 | 30% | No | No | More infill is always better for these parts | |||||||||||||||||
61 | Buttplate_A | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | More infill is always better for these parts | |||||||||||||||||
62 | Buttplate_B | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | More infill is always better for these parts | |||||||||||||||||
63 | Accessory options . | Accessory options Replacements for core parts, or just for fun bits. | Flat_butt_cap | 1 | https://drive.google.com/drive/folders/1Wgq3vDLl04fTNVPl8xqyxBixJp0hqc2B?usp=sharing | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||
64 | Old_Ramrod_head | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
65 | Belt_clip | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | Yes | No | ||||||||||||||||||
66 | Barrel options . | Octagon Barrel (Pistol) - Fancy! (treat this as the default) - Works on most printers (e.g. ender 3) | Sho_stock_front | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | ||||||||||||||||
67 | Sho_barrel_body | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
68 | Sho_barrel_base | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
69 | Sho_ramrod_guide_back | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
70 | Sho_barrel_muzzle | 1 | N/A | Orange | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
71 | Shorty Barrel (Small pistol) - Optimized for smaller printers (e.g. prusa mini). | Sho_stock_front | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | |||||||||||||||||
72 | Sho_barrel_body | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
73 | Sho_barrel_base | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
74 | Sho_ramrod_guide_back | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
75 | Sho_barrel_muzzle | 1 | N/A | Orange | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
76 | Axe Barrel - Optimized for smaller printers (e.g. prusa mini). - Reuse the barrel parts from the shorty version here. - Note extra required hardware | Axe_stock_front | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | No | Yes | |||||||||||||||||
77 | Axe_head | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
78 | Axe_Blade_piece_B | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
79 | Axe_Blade_piece_A | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
80 | M5 x 10mm (Pan head, Slot) | 1 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||
81 | Carbine barrel (Small musket) (Legacy option) - Needs a larger printer bed (e.g. Cr-10) - Fancy! Use if you want a sort of 1600s century carbine look. - Weird performance, stretches elastics too far AND barrel adds too much fiction. | Car_stock_front | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | |||||||||||||||||
82 | Car_barrel_body | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
83 | Car_barrel_base | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
84 | Car_ramrod_guide_back | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
85 | Car_barrel_muzzle | 1 | N/A | Orange | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
86 | Car_Rail_bottom | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
87 | Car_Rail_top | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
88 | Car_Ramrod | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | ||||||||||||||||||
89 | Cavalry Barrel (Large pistol) (Legacy option) - Works on most printers (e.g. ender 3) - Long pistol barrel, same performance as shorter ones. | Cav_stock_front | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | |||||||||||||||||
90 | Cav_barrel_body | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
91 | Cav_barrel_base | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
92 | Cav_ramrod | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | No | Yes | ||||||||||||||||||
93 | Cav_ramrod_guide_back | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
94 | Elastic Musket Barrel (Medium musket) (Legacy option) - Works on most printers (e.g. ender 3) - Note extra required hardware. - 50cm long musket barrel. performance is great, wears through elastic quickly though - consider alternatives like bungie cord. | Mus_Stock_front_B | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | |||||||||||||||||
95 | Mus_Stock_front_A | 1 | N/A | Wood / Brown | 0.2 | 1.2 | 18% | Yes | Yes | ||||||||||||||||||
96 | Mus_Barrel_band_B | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
97 | Mus_Barrel_band_A | 1 | N/A | Brass / Gold | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
98 | Mus_Barrel_A | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
99 | Mus_Barrel_B | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||
100 | Mus_Barrel_C | 1 | N/A | Metal / Grey | 0.2 | 1.2 | 18% | No | No | ||||||||||||||||||