A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | AB | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | |||||||||||||||||||||||||||||
2 | Attention: This list is no longer actively maintained. The presented data could be outdated or incomplete | ||||||||||||||||||||||||||||
3 | |||||||||||||||||||||||||||||
4 | Model | Type | Votages/Rating | Notes | Description | Aprox. Price | Link | ||||||||||||||||||||||
5 | Please note: this list is intended to be an orientation for people looking for a PSU to use with their modular. It's by no means intended to be 100% accurate and complete. Though we are doing our best to keep it updated. | ||||||||||||||||||||||||||||
6 | |||||||||||||||||||||||||||||
7 | 4ms ROW Power 30W | switching (see note) | 12V@1.5A / -12V@.75A / 5V@.5A | Some images show an AC external lump for this solution, implying an external and internal linear solution. The user manual specifies a DC external lump, implying a switching solution (needed to derive -12V from +12V). Dealer photos show a DC wall wart, so presumed switching type. | Compact and relatively good current rating. Comes as a small euro module. Needs an external 15-20V power brick, so it’s not wired to AC directly | €149.00 | http://www.4mspedals.com/rowpow.php | ||||||||||||||||||||||
8 | 4ms ROW Power 40W | switching (see note) | 12V@1.5A / -12V@1.3A / 5V@1.5A | Some images show an AC external lump for this solution, implying an external and internal linear solution. The user manual specifies a DC external lump, implying a switching solution (needed to derive -12V from +12V). Dealer photos show a DC wall wart, so presumed switching type. | Compact and relatively good current rating. Comes as a small euro module. Needs an external 15-20V power brick, so it’s not wired to AC directly | €149.00 | http://www.4mspedals.com/rowpow.php | ||||||||||||||||||||||
9 | Acidlabs PSU module | linear | 12V/700mA, -12V/700mA | Similar to uZeus. PSU included. Wall wart input power 12 VAC. | €70.00 | http://www.acidlab.de/ProductAssets/Modular/Module_Overview.pdf | |||||||||||||||||||||||
10 | ADDAC ADDAC909E | unknown | Power 2A: +12V: 2.2A | -12V: 1.5A Power 4A: +12V: 4A | -12V: 3A | Almost no info on web site, type indeterminate. | External PSU box, only +/-12V, comes in both 2A and 4A versions. Connected to the main case with a 5-PIN DIN connector cable. Internal version also available. | 240€ for 2A and 350€ for 4A | http://www.addacsystem.com/products/ADDAC909%20PSUs | ||||||||||||||||||||||
11 | Art for the Ears Flower Power Supply | switching | 12V @ 2.0A, -12V @ 1.5A, 5V @ 1.5A | 4 hp module with power brick | price not listed | http://artfortheears.com/?p=419 | |||||||||||||||||||||||
12 | Clicks&Clocks PSU | linear | only +/-12V, 1200mA on both rails | no 5V, also comes as as DIY kit. Compact size. Wired directly to AC mains | kit: 70€ built: 80€ | http://clicksclocks.de/ | |||||||||||||||||||||||
13 | Doeper DIY Kit, A-100DIY PSU | linear | only +/-12V, 1200mA on both rails | No +5V, requires heavy external AC power brick (not provided), not wired directly to AC mains. | €120.00 | http://www.doepfer.de/home_e.htm | |||||||||||||||||||||||
14 | Doepfer PSU2 | linear | only +/-12V, 1200mA on both rails | Discontinued end of 2015. | No Power Brick, ring core transformer. Wired directly to AC mains. | €100.00 | http://www.doepfer.de/a100z_e.htm | ||||||||||||||||||||||
15 | Doepfer PSU3 | hybrid switching input, linear output | 12V @ 2000 mA, -12V @ 1200 mA, 5V @ 4000 mA | Replaces PSU2 in 2016. | Switching power to +/-15V and 5V, then linear regulation for +/-12V. | $190.00 | http://www.doepfer.de/home_e.htm | ||||||||||||||||||||||
16 | Elby Designs ED111 | linear | 12V up to 500 mA per power connector (6.0A total), -12V up to 500 mA per power connector but total limited to 600 mA. | Similar to the above, but this one regulates the output for each channel separately. No 5V, a big board, but PSU and Busboard are one piece, needs an external 15V Brick. 12 x 16 pin power connectors. | 233.25 AUD (power brick not included) | http://www.elby-designs.com/contents/en-us/d13.html | |||||||||||||||||||||||
17 | Elby Designs ED122 | linear | 12V @ 1A and -12V @ 600mA | Tall heatsinks. | Just the PSU without the busboard part. No 5V, needs an external 15V Brick. | 65.57 AUD (power brick not included) | http://www.elby-designs.com/contents/en-us/d13.html | ||||||||||||||||||||||
18 | Elby Designs ED126 | linear | 1.5A @ +12V and 1A @ -12V | No 5V, a big board, but PSU and Busboard are one piece, needs an external 15V Brick. | 119.84 AUD | http://www.elby-designs.com/contents/en-us/d13.html | |||||||||||||||||||||||
19 | EOWAVE DIY PSU | switching | 12V @ 1200 mA, -12V @ 1200 mA | Seems like a great simple DIY psu for desktop synths and small skiffs. | Not much info on it, except that it should be good to power 6U of modules, needs an external power brick (not included but available separately). | 33,44€ | http://www.eowave.com/shop/products.php?prod=1309 | ||||||||||||||||||||||
20 | Erica Synths Eurorack bipolar 12V PSU kit | linear | 12V/-12V up to 1.5A | Comes as a full kit (partial kit available as well). Small and compact. Toroidal transformer, LM317/LM317 regulators. | €55 | http://www.ericasynths.lv/en/shop/3817-eurorack_bipolar_12v_psu_kit.html | |||||||||||||||||||||||
21 | Frequency Central Routemaster DIY | Linear/mixed | =+12V 500mA, -12V 500mA, 5V 100mA (recommended) | DIY project, you can only buy the PCB. Powered by an external 12VAC wallwart, or alternatively a 12VAC centre-tapped transformer | Powered Busboard, Options are included for Euro. MOTM, or Dotcom power headers | 15GBP (PCB) | http://www.frequencycentral.co.uk/?page_id=1766 | ||||||||||||||||||||||
22 | Frequency Central Power DIY | linear | 500mA +/-12V, 100mA +5V | DIY, PCB only | From the Frequency Central website: FC Power works from a 12VAC wallwart and provides ~500mA at +/-12V, ~100mA at 5V (optional). Dead simple to build and based on easily sourced and inexpensive parts. You can also choose to built it as a +/-15V supply with minor component changes. Linear 12 VAC wall wart plus linear 7812/7912 regulators | £10 GBP for the PCB | http://www.frequencycentral.co.uk/?page_id=894 | ||||||||||||||||||||||
23 | HBB15 1.5 AG | linear | 12V/-12V – up to 1.7A / rail | Available from Mouser, Digi-Key, other sources. Semi-standard size made by several manufacturers: SL Power/Condor, Bel, International Power. | Linear open frame PSU, wired directly to mains power, no wall wart needed. Add mains wiring, power switch, fuse. Other versions available that add +5V linear supply. | €70.00 | http://www2.mouser.com/ProductDetail/Bel-Power-Solutions/HBB15-15-AG/?qs=%2fha2pyFadujtjQW5S%252boXADlGnb2IOUtE9BXyB%2fTwqBEhILutGta9lA%3d%3d | ||||||||||||||||||||||
24 | Hinton Instruments PSUs | linear | 12V/-12V (other voltages can be added if desired) 1.5-2.0A per rail | Full solution includes low resistance bus bars and power cables. Also available for Wiard, Serge, MOTM, Blacet Frac-Rack, etc. | Top of the line linear power solution. Custom built so different configurations are possible. Very low output ripple and noise at full load, typically < 2mVpp. Tested at max load. Only Eurorack PSU to list a noise and ripple specification, that tells you something. | £235, 250, 350 GBP(dual 1.6A, dual 2.0A, Triple 1.5A) | http://hinton-instruments.co.uk/paprod/psu/ | ||||||||||||||||||||||
25 | Intellijel TPS30 MAX | switching | 12V @ 1.5A, -12V @ 1.5A, +5V @ 1 A | Integrated bus board with 20 unshrouded power connectors. | Busboard with integrated PSU, needs an external power brick. Good solution for 3U or possibly 6U. Triple 120 degree phased controller for lower induced noise. 4 layer PCB with start power distribution. | $139.00 (power brick not included, the Meanwell will be around $25) | https://intellijel.com/product/triple-power-supply-30w-3u-6u-busboard/ | ||||||||||||||||||||||
26 | Intellijel TPS30W (mini) | switching | 12V @ 1.2A, -12V 1.2A, +5V output at 500 mA | Integrated bus board with 10 power connectors. | Busboard with integrated PSU, needs an external power brick. Better solution for 3U. Triple 120 degree phased controller for lower induced noise. 4 layer PCB with start power distribution. Intellijel recommends the Meanwell GS40A15-P1J AC/DC PSU, which can be bought from Itellijel as well. | $120.00 (power brick not included, the Meanwell will be around $25) | https://intellijel.com/product/mini-triple-power-supply-30w-skiffs-3u-6u-busboard/ | ||||||||||||||||||||||
27 | Intellijel TPS80W | switching | 12V @ 3A, -12V 3A, +5V output at 1.5A | Integrated bus board with 20 power connectors. | Busboard with integrated PSU, needs an external power brick. Not cheap, but delivers loads of power, good for 6U! 4 layer PCB with start power distribution. Intellijel recommends the Meanwell GS90A15-P1M 90W AC/DC PSU, which can be bought from Itellijel as well. | $240.00 (power brick not included, the Meanwell will be around $35) | http://www.intellijel.com/product/triple-power-supply-80w-3u-6u-busboard/ | ||||||||||||||||||||||
28 | Konstant Lab MDLRCASE powered busboard | switching? | +12V / 2A -12V / 1.2A +5V / 1.5A | Output stability is officially rated ±1% for 0-100% load, which likely means that it can be off by 240mV peak-to peak (120mV in each direction). Not sure what this means exactly though. | As the name states, a powered busboard. | 249€ | https://www.mdlrcase.com/product/mdlrcase-mdlr-pwr/ | ||||||||||||||||||||||
29 | Konstant Lab StrongPWR | switching? | 12V / 2A -12V / 1.2A +5V / 1.5A | Output stability is officially rated ±1% for 0-100% load. The front panel contains a powered USB connector. | 4HP PSU module with external power brick (needs to be purchased separately) | 140€ | http://konstantlab.audio/ | ||||||||||||||||||||||
30 | Konstant Lab ZDROJ | linear | +12V / 1500mA -12V / 1500mA +5V / 700mA | Output noise at full load is officially rated "max 0,008%" | Linear PSU with toroidal transformer and metal cover | 170€ | http://konstantlab.audio/ | ||||||||||||||||||||||
31 | Konstant Lab μZDROJ | switching | 12V / 2000mA -12V / 500mA +5V / 1500mA | Output noise at full load is officially rated "max 0,08%", which translates to something like 96 mVpp at full load on the +12V rail | 4HP PSU module with external power brick (needs to be purchased separately) | 120€ | http://konstantlab.audio/ | ||||||||||||||||||||||
32 | L-1 12V bipolar linear PSU+busboards | Linear | 1.5A per rail (+/-12V), +5V amperage not specified | Comes with various options, available both built and as a DIY kit. Very low noise, scope shots on Muffs forum topic, click for link. | A linear PSU with optional busboards. The PSU only delivers +/-12V, but is stated to deliver current "without ripples and noise". Tested with 1:1 probes and 20 MHz scope, less than 1 mV ripple from light load to almost fully loaded at 1.3A. Very clean. Comes with a 5V regulator on the busboards. | Complete kit: PSU + two busboards - $165 + $25 shipping. / Assembled PSU + two busboards $250 + $25 shipping. | http://l-1.su/Power.html | ||||||||||||||||||||||
33 | Mean Well P50A13D-R1B | switching | Power: 12V: 2A | -12V: 0,5A | 5V: 4A | same as above | Similar to the above open-frame PSUs, but comes as an external power brick, hence safer and better suited for small skiffs. Of course it's also pricier. | 32€ + VAT | http://www.meanwell.co.uk/p50a13d-r1b.html | ||||||||||||||||||||||
34 | Meanwell RT-50B | switching | 12V: 2A | -12V: 0.5A | +5V: 4A | The rating for the -12V is 0.5A, but reportedly as long as the load on the other voltages is low enough it can deliver up to 1A. 80 mVPP noise/ripple on +5V, 120 mVPP noise/ripple on +12V and -12V, per spec sheet. | Lot’s of power, small, compact unit. wire and you’re done. Delivers more power than all the others, delivers +5V. Wired directly to AC mains | 20€ | http://www.meanwell.com/search/rt-50/rt-50-spec.pdf | ||||||||||||||||||||||
35 | Meanwell RT-65B | switching | Power: 12V: 2.8A | -12V: 0.5A | +5V: 5A | 80 mVPP noise/ripple on +5V and -12V, 120 mVPP noise/ripple on +12V per spec sheet. | same as above, just more current | 20€ | http://www.meanwell.com/search/rt-65/rt-65-spec.pdf | ||||||||||||||||||||||
36 | Meanwell T-60B (original and clones) | switching | 12V: 2.5A | -12V: 0.5A | +5V: 5A | Similar to the newer Meanwell PSUs, The original one is not being produced anymore, but you can still find it. Also clones of this model have been reported to work well too, but I would be careful with them. | 25-50€ | http://www.meanwell.com/search/T-60/T-60-spec.pdf | |||||||||||||||||||||||
37 | Metatronic Mods Analog Power Version 3 | linear | +12V ~ 2500mA, -12V ~ 1500mA, +5V ~ 1000mA | DIY project: you can only buy the PCB. Voltage Ripple & Noise @20MHz Bandwidth (offical data): +12V 2.53mVRMS / 10.4mVP-P measured at 3000mA load. -12V 2.53mVRMS / 10.4mVP-P measured at 1500mA load. +5V 16.8mVRMS / 64mVP-P measured at 1000mA load. | Old-school linear PSU | $19.99 (PCB) | https://www.metatronicmods.com/store/p9/Analog_Power | ||||||||||||||||||||||
38 | MFOS LM317/LM337 Supply | linear | Adjustable output (9-15V +/-) up to 1.5A | DIY kit only. compact PSU board. Needs an external power brick | $45.00 | http://www.musicfromouterspace.com/index.php?MAINTAB=CATALOG&CATPARTNO=NONE&VPW=1268&VPH=571 | |||||||||||||||||||||||
39 | MFOS Wallwart PSU | linear | 12V/-12V – max 1000 mA (depends on configuration) | DIY kit only. Small PSU for compact systems, needs an external power brick (not included) LM7812/LM7912 based. | $40.00 | http://www.musicfromouterspace.com/index.php?MAINTAB=CATALOG&CATPARTNO=NONE&VPW=1268&VPH=571 | |||||||||||||||||||||||
40 | Synthrotek 5A PSU | switching | 12V: 2.2A | -12V: 1.3A | 5V: 1.5A | If you don't know exactly what you're doing you should get the power brick from Synthrotek. | comes both as a kit and fully built, has a nice panel for turning power on and off. +12V come straight from the power brick. | 112€ (kit with brick), 142€ (built with brick) | http://www.synthrotek.com/products/modular-circuits/eurorack-power-distribution-boards/ | ||||||||||||||||||||||
41 | Synthrotek Deluxe Power | switching | 12V @ 2.0A | -12V @ 1.5A | 5V @ 1.5A | You can choose between the standard and the more expensive (but better) Mean Well power brick. Took measurements from Deluxe Power module powering a Synthrotek Noise Filtering Distribution Board. Measured 103 mV peak to peak and 3.42 mV RMS noise on +12 VDC for lightly loaded system. -12V was worse, measuring 89.6 mV and 8.59 mV RMS noise. Measured with 1:1 probes and 20 MHz scope BW limit. Changing the location of the measurements on the power distribution board had little effect, it had this noise level everywhere. | Comes in various configuarations, seems like the upgraded version of the older 5A PSU. | $139 (without brick) | http://store.synthrotek.com/Deluxe-Power-Module_c_72.html | ||||||||||||||||||||||
42 | Tip Top Audio Zeus Studio Busboard | hybrid, switching input, linear output | 12V @ 1.3A, -12V @ 800 mA, 5V @ 300 mA | Output regulation spec of +/-12V: +/-0.05% Linear discrete design. +5V not specified, may be switching. Shielded switcher, Tiptop Audio DC800 encapsulated switcher. Three 3 terminal linear regulators seen on the board. Believe that the +12V is from a linear regulator from the +15VDC input, and the onboard switcher provides -15VDC to linear regulator for -12 VDC, and also +5VDC from the switcher. Possibly the switcher provides an intermediate voltage (~+8VDC) to linear regulate down to +5VDC. | Large power supply and distribution board, 14 20 pin unshrouded headers, 2 Analogue Solutions DIP style sockets. | $217.00 with Zeus Access power control panel | http://www.tiptopaudio.com/zeussb.php | ||||||||||||||||||||||
43 | Tip Top µZeus | switching | 12V, -12V, 5V – 2000mA total | -12V can be either 0.4A or 0.5A depending on the jumper position | The switching regulator needs to have a minimum load of 100mA (out of 500mA) at any given time. There is a jumper do disable this, if you have more than 4 modules. | very small and compact. delivers 5V, comes in form as a small module. needs an external 15V power brick, so it’s not wired to AC directly. I’ve heard several complaints about this PSU from people, things ranging from noise to burned modules. I’m not sure if it’s the PSU or the user not using it properly, but I thought I’d mention it. | 85€ without brick | http://www.tiptopaudio.com/zeusmicro.php | ||||||||||||||||||||||
44 | TRACOPOWER – TXL 035-1212D | switching | 12V: 3A, -12V: 1.5A | I had a bunch of problems with this one, so I can't really recommend it. Even with a load higher than 300mA all digital modules would glitch out from time to time. | No 5V, compact and apparently decent quality, plugs directly to the mains. Has an annoying minimum required load for regulation of 300mA and ripple and noise is slightly higher than the Meanwell. | 44,80€ | http://www.tracopower.com/fileadmin/medien/dokumente/pdf/datasheets/txl.pdf | ||||||||||||||||||||||
45 | Trogotronic m15 | 10A – 20A (all channels combined) | No info on how much current you get for each voltage. The system seems to need two bricks (one for +/-12V and one for +5V). From the description on the website it seems that you get 50% of the current on the +5V rail. | Busboard+PSU system that comes in all sorts of configurations (both assembled and DIY) | $26.00 – $420.00 | https://trogotronic.com/product/m15_power/ | |||||||||||||||||||||||
46 | Monorocket Base150 | switching | 3500 mA total | 2 row 150 hp wide case with power supply. | http://monorocket.blogspot.com/p/base.html | ||||||||||||||||||||||||
47 | Monorocket Lexington LX2 | switching | 7000 mA total, 5V on 1st and 3rd rows | 4 row 150 hp wide case with power supply. | $1500.00 | http://monorocket.blogspot.com/p/gemini.html | |||||||||||||||||||||||
48 | Monorocket M9# Portable Powered Case | switching | 3500 mA total | 3 row 120 hp wide case with power supply. | $900.00 | http://monorocket.blogspot.com/p/m.html | |||||||||||||||||||||||
49 | Monorocket MXE Portable Powered Case | switching | 2100 mA total, 5V on every rail. | 4 row 120 hp wide case with power supply. | $1050.00 | http://monorocket.blogspot.com/p/m.html | |||||||||||||||||||||||
50 | Pittsburgh Cell 48 | linear | 12V/-12V @ 450 mA | PSU similar to Cell 90, see notes. Discontinued. | 48 hp case with integrated power supply. Earlier systems had one long power cable that folded back several times within the chassis, bad for power distribution. Later systems have short cables on each side of the power pcb. | $149.00 plus $35.00 for wood side pieces | http://pittsburghmodular.com/cell-48-desktop-case/ | ||||||||||||||||||||||
51 | Pittsburgh Cell 90 | linear | 12V/-12V @ 850 mA (see notes) | Measured noise/ripple on lightly loaded system, 600-700 uVrms for +12 VDC, 240-47 uVrms for -12VDC. With 300 mA load ripple was 50 mvPP. With 500 mA load the ripple was 1.5 VPP. That is not a typo, one point five volts peak to peak. Measurement with 1:1 passive probe and 20 MHz bandwidth oscilloscope. Not recommended for greater than 300 mA loads. Discontinued. | 90 hp case with integrated power supply. Earlier systems had one long power cable that folded back several times within the chassis, bad for power distribution. Later systems have one short cable to left of power pcb and two ~10 inch cables to the right, allowing some isolation by putting noisy modules on their own cable. | $209.00 plus $35.00 for wood side pieces | http://pittsburghmodular.com/cell-90-desktop-case/ | ||||||||||||||||||||||
52 | Pittsburgh Cell 48 DC | switching | 12V/-12V @ 900 mA, 5V @ 500 mA | 48 hp case with integrated power supply. | $249.00 plus $35.00 for wood side pieces | http://pittsburghmodular.com/cell-dc-cases/ | |||||||||||||||||||||||
53 | Pittsburgh Cell 90 DC | switching | 12V/-12V @ 900 mA, 5V @ 500 mA | 90 hp case with integrated power supply. | $349.00 plus $35.00 for wood side pieces | http://pittsburghmodular.com/cell-dc-cases/ | |||||||||||||||||||||||
54 | Pittsburgh Move [104] (duratex rugged exterior) | linear | 12/-12V @ 850 mA, 5V @ 300 mA | Discontinued, some stock remains. | 104 hp case with integrated power supply. | $349.00 | http://pittsburghmodular.com/move-104/ | ||||||||||||||||||||||
55 | Pittsburgh Move [208] (duratex rugged exterior) | linear | 12/-12V @ 2.0A mA, 5V @ 600 mA | Discontinued, some stock remains. | 208 hp case with integrated power supply. | $599.00 | http://pittsburghmodular.com/move-208-mobile-case/ | ||||||||||||||||||||||
56 | Pittsburgh Move [104] (birch ply exterior) | switching | 12/-12V @ 900 mA, 5V @ 500 mA | 104 hp case with integrated power supply. | $449.00 | http://pittsburghmodular.com/move-cases/ | |||||||||||||||||||||||
57 | Pittsburgh Move [208] (birch ply exterior) | switching | 12/-12V @ 1400 mA, 5V @ 750 mA | 208 hp case with integrated power supply. | $599.00 | http://pittsburghmodular.com/move-cases/ | |||||||||||||||||||||||
58 | 4ms single and dual row powered cases, thick or thin | switching | See 4ms specs for Row Power 30 and 40 | 104 hp cases with power supply, 208 hp for double row. | Single Row Powered Thin $398.00, Single Row Powered Thick $438.00, Double Row Powered Thin $589.00 | http://www.4mspedals.com/mr-overview.php | |||||||||||||||||||||||
59 | Eowave Titan Capsule Eurorack Case with MIDI interface | switching | 12V depends on external power brick, 12V @ mA available with 1500 mA power brick, -12V @ 600 mA | Does not include +12 VDC 1500 mA power brick | ? size case with partial power supply (12V only) and MIDI interface | €166.39 | http://www.eowave.com/shop/products.php?prod=1383 | ||||||||||||||||||||||
60 | Goike 6U, 9U, 12U and 15U curved poplar cases | Varies on PSU selection | Options for Tip Top Zeus, Intellijel TPS80 or Make Noise PSUs | 2, 3, 4, 5 row 104 hp wide cases with power supply options. | Price varies on power option, prices without power: 6U curved $370.00, 15U curved $1715.00. | http://www.goike.com/node/5 | |||||||||||||||||||||||
61 | Make Noise Skiff Powered (2015) | switching | 12V @ 1.2A, -12V @ 1 A, 5V@1A | Measured 36 mV peak-peak and 3.8 mV rms noise/ripple with lightly loaded system. Measurement with 1:1 passive probe and 20 MHz bandwidth oscilloscope. Saw similar noise at signal outputs. However, recording this into Wavelab with MOTU Ultralite mk3, see no difference in noise levels between this and the Pittsburgh Cell 90 linear based system. | 104 hp (actually 105 hp) case with power supply, 10 unshrouded power connectors. Integrated bus board is daisy chain topology. | $250.00 | http://www.makenoisemusic.com/Skiff.html | ||||||||||||||||||||||
62 | MTBLSM Mechanism | 1100mA @ +/-12V | They have noise/ripple specs on the page (a screenshot from a mini scope), but the testing conditions are unknown | 3U / 95HP case with 1U utility panel | price not listed | http://www.mtblsm.com/#mechanism | |||||||||||||||||||||||
63 | Trogotronic m168 / m168s | 10A overall (but no info on the individual voltages) | There's basically two independent PSUs in there. The case does not have a power switch. Only the m168S does have an inlet for the mains cable. | Nice water-proof rugged case. 6U x 84HP | $393.00 – $468.00 | https://trogotronic.com/product/m168/ | |||||||||||||||||||||||
64 | |||||||||||||||||||||||||||||
65 | |||||||||||||||||||||||||||||
66 | |||||||||||||||||||||||||||||
67 | |||||||||||||||||||||||||||||
68 | |||||||||||||||||||||||||||||
69 | |||||||||||||||||||||||||||||
70 | |||||||||||||||||||||||||||||
71 | |||||||||||||||||||||||||||||
72 | |||||||||||||||||||||||||||||
73 | |||||||||||||||||||||||||||||
74 | |||||||||||||||||||||||||||||
75 | |||||||||||||||||||||||||||||
76 | |||||||||||||||||||||||||||||
77 | |||||||||||||||||||||||||||||
78 | |||||||||||||||||||||||||||||
79 | |||||||||||||||||||||||||||||
80 | |||||||||||||||||||||||||||||
81 | |||||||||||||||||||||||||||||
82 | |||||||||||||||||||||||||||||
83 | |||||||||||||||||||||||||||||
84 | |||||||||||||||||||||||||||||
85 | |||||||||||||||||||||||||||||
86 | |||||||||||||||||||||||||||||
87 | |||||||||||||||||||||||||||||
88 | |||||||||||||||||||||||||||||
89 | |||||||||||||||||||||||||||||
90 | |||||||||||||||||||||||||||||
91 | |||||||||||||||||||||||||||||
92 | |||||||||||||||||||||||||||||
93 | |||||||||||||||||||||||||||||
94 | |||||||||||||||||||||||||||||
95 | |||||||||||||||||||||||||||||
96 | |||||||||||||||||||||||||||||
97 | |||||||||||||||||||||||||||||
98 | |||||||||||||||||||||||||||||
99 | |||||||||||||||||||||||||||||
100 |