Grease

	A	B	C	D	E	F	G	H	I	K
1	High-Load EP Greases, for excessive load and/or low rotational velocity
2	Grease	NLGI	Chemistry	4-ball weld load (N)	4-ball scar diameter (mm)	Timken OK load (N)	Base oil viscosiy (cSt)	Base oil type	EP Solid Additives
3	Penrite QCA MX9	2	Calcium/Lithium	8000	0.7 ?		680	mineral	Graphite (9%)
4	Penrite CX152 WR	2	Calcium Sulphonate	7650	0.7		200	mineral	None
5	Castrol SBX2	2	Lithium	8000	0.52	204	1000	synthetic / mineral	Molybdenum Disulfide (5%), Graphite	LB
6	Castrol Ultratak	2	Lithium	8000	0.35	408	500		None	LB
7	Mobilgear OGL 461	1.5	Lithium	8000	0.6		460		Graphite
8	Mobil XHP 681 Mine	1	Lithium	6200	0.5	227	680
9	Mobil Moly 52	2	Lithium	4000	0.4				Molybdenum Disulfide
10	SKF LGET2	2	PTFE	8000				synthetic w/ fluorine
11	Cat Desert Gold	2	Calcium Sulphonate	6200	0.45	295	370-425	synthetic	Molybdenum Disulfide (5%)
12	Timken Construction / Off Highway	2	Calcium Sulphonate	6200	0.45	295	430-490		Molybdenum Disulfide (5%)
13	Belray Molylube 5% AC (#69500)	2	Aluminium	8000	0.5	272	222		Molybdenum Disulfide (5%)	LB
14
15	Notes:
16	LA specification requires 0.9mm maximum wear scar
17	LB specification requires 0.6mm maximum wear scar and 200kgf (1961 N) weld load
18	GB, GC specifications require 0.9mm maximum wear scar 200kgf (1961 N) weld load
19	ASTM D-2596: Weld Load test
20	ASTM D-2266: Wear Scar test
21	Greases in this table far exceed the basic requirements for an EP grease
22
23	High-Speed, High-Temperature Greases, for electric motors and spindle bearings
24	Grease	NLGI	Chemistry	Max Temp (*C)	Drop Point (*C)	Speed Factor (mm/min)	Base oil viscosiy (cSt)	Base oil type	EP Solid Additives
25	Castrol Tribol GR HS 1.5
26	Klüber Klüberquiet BQ 74-73 N
27	Klüber Asonic Q 74-73
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100