ABCDEF
1
DateRemarks"","
2
9-Apr-12First Edition, thanks to ghwong's PID Map.
3
http://priuschat.com/forums/obdii-android-app/106611-prius-c-custom-pids.html
4
Cells shaded with this color are for setting of customizable features, not applicable for other models, use with caution!
5
Only need to run once, can use TEST Button to select the desire PID to run.
6
Cells shaded with this color need to run continuously to work, need to select as a display item.
7
Compare against ZVW35 PID Map, deleted those that are different.
8
Change Battery Block voltages & resistance to 10 blocks.
9
10-Apr-12Change Blower Motor Speed Level scaling, Vehicle Load scaling.
10
11-Apr-12Delete Shift Sensor Main, Shift Sensor Sub, Shift Sensor Select Main, Shift Sensor Select Sub.
11
Change Auxiliary Battery Temperature equation to (A - 40).
12
Delete Engine Rev (Sensor), P Pos SW Terminal Vol, Cooling Fan Relay Status
13
Delete Number in Units column.
14
14-Apr-12Added Fuel System Status #1, Short FT #1, Long FT #1, IGN Advance.
15
Added Target Air-Fuel Ratio, AF Lambda B1 S1, AFS Voltage B1S1, MIL, Initial Engine Coolant Temp
16
Added Initial Intake Air Temp, Total FT #1, EGR Step Position, Communication with HV, Communication with Brake.
17
15-Apr-12Added Model code, Engine Type, Cylinder Number, Destination, Model Year, System Identification.
18
5-May-12Added Deceleration Sensor, Deceleration Sensor2, TRC(TRAC) Ctrl Status, Reservoir Warning SW.
19
Added Steering Angle Sensor, Main Idle SW, Stop Light SW, Parking Brake SW, Stop Light Relay Output.
20
Added ABS Warning Light, Brake Warning Light, Slip Indicator Light, Buzzer, ECB Warning Light, vehicle speed.
21
Added FR Wheel Acceleration, FL Wheel Acceleration, RR Wheel Acceleration, RL Wheel Acceleration.
22
Added Zero Point of Decele, Zero Point of Decele2, Zero Point of Yaw Rate, Zero Point of Steering Angle.
23
Added FR Regenerative Request, FR Regenerative Operation, TRC(TRAC) Engine Ctrl Status, TRC(TRAC) Brake Ctrl Status.
24
Added FR Wheel VSC Ctrl Status, FL Wheel VSC Ctrl Status, RR Wheel VSC Ctrl Status, RL Wheel VSC Ctrl Status.
25
Added FR Wheel ABS Ctrl Status, FL Wheel ABS Ctrl Status, RR Wheel ABS Ctrl Status, RL Wheel ABS Ctrl Status.
26
Added RR Wheel EBD Ctrl Status, RL Wheel EBD Ctrl Status, BA Ctrl Status, PBA Ctrl Status.
27
Added Zero Point of Yaw Rate2, P-Seatbelt Buckle SW, Check Engine SW, Oil Pressure Switch, Vehicle Speed Meter.
28
Added Coolant Temperature, Key Remind Sound.
29
27-Jul-12Corrected Vehicle Speed Meter_7C0 scaling.
30
27-Oct-12Corrected Blk# min & Blk# max with offset of 1.
31
29-Oct-12Corrected Vehicle Load scaling.
32
27-Nov-12Corrected Set Temperature (D side).
33
1-Dec-12Corrected Coolant_7C0 scaling.
34
21-Dec-12Corrected HV battery charge control and HV battery discharge control, thanks to usbseawolf2000.
35
29-Dec-12Added CCS Vehicle Spd, CCS Mem Vehicle Spd, Cruise Operation Status, Cruise Control.
36
Added Stop Light Switch 1, Stop Light Switch 2, RES/ACC Switch, SET/COAST Switch, Cancel Switch.
37
5-Jan-13Added Catalyst Temp B1 S1, Catalyst Temp B1 S2 for Singapore version.
38
19-Jan-13Move customize options to a new worksheet because those PIDs got inadventently executed while user scroll through the list.
39
Thanks to Electric Charge for the heads up.
40
http://priuschat.com/threads/geniii-prius-custom-pids-for-torque-app.98693/page-11#post-1722748
41
User should manually enter it using TEST function as suggested by usbseawolf2000.
42
26-Jan-13Coolant Temperature_7C0 corrected with SIGNED() function.
43
4-Sep-13Corrected Air Mix Servo Targ Pulse(D), Air Mix Servo Actual Pulse(D), Air Outlet Servo Pulse (D) with offset of 128.
44
Corrected Air Outlet Servo Actu Pulse(D), Air Inlet Damper Targ Pulse, Air Inlet Damper Actual Pulse with offset of 128.
45
8-Sep-13Corrected ECU Control Mode, Deceleration Sensor, Deceleration Sensor2.
46
Corrected FR Regenerative Request, FR Regenerative Operation, ISC Learning Value.
47
28-Nov-13Remove Coolant Temperature_7C0 SIGNED() function, minimum temp. should be 0C/32F.
48
25-Dec-13Added Total Distance Traveled.
49
29-Dec-13Added HV System Indicator
50
http://priuschat.com/threads/xgauge-for-hsi.113034/
51
5-Jan-14Added SMR Status and Control Status.
52
12-Jan-14Added Cooling Fan Frequency 1.
53
21-Jan-14Added Stroke Sensor, Stroke Sensor2, Accumulator Sensor, Regulator Pressure Sensor Output.
54
27-Jan-14Added Shift lever position sensor.
55
28-Jan-14Added Starter Switch, Stop Light Switch.
56
28-Apr-14Thanks to Cave Arnold for spotting the errors.
57
http://priuschat.com/threads/prius-phv-custom-pids-for-torque-android-app.104779/page-9#post-2000539
58
13-Jul-14Added CSV for direct conversion to Torque CSV format.
59
19-Oct-15Deleted all CSV Tab.
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74