1 | Short Desc | Working? | ECU | Module | Optie | Standard | Changed | HEX std | HEX edited | Description |
---|---|---|---|---|---|---|---|---|---|---|
2 | ||||||||||
3 | ||||||||||
4 | Module: FEM_BODY | Standard | Changed | |||||||
5 | indicator amount p1 | Yes | FEM_BODY | 3064 | Pia_default_tippblinker | einfagblinken | mehrfagblinken | Edit short click on indicators | ||
6 | indicator amount p2 | Yes | FEM_BODY | 3060 | BLINKZYKLEN_ANZAHL_TIPP | werte=02 | werte=04 | Desired amount=werte+1. So werte=4 gives 5 blinks | ||
7 | ||||||||||
8 | Fogs on while turning p1 | Yes | FEM_BODY | 3073 | C_CLC_ENA | F30disable | F30enable | Fogs when turning | ||
9 | Fogs on while turning p2 | Yes | FEM_BODY | 3073 | C_BLC_ENA | F30disable | F30enable | continued | ||
10 | Fogs on while turning p3 | Yes | FEM_BODY | 3066 | KL_ENABLE_LI | KL_Aus | KL_Ein | continued | ||
11 | Fogs on while turning p4 | Yes | FEM_BODY | 3073 | KL_ENABLE_RE | KL_Aus | KL_Ein | continued | ||
12 | Fogs on while turning p5 | Yes | FEM_BODY | 3062 | MAPPING_abbiegel_L_output | Off | nsw_l | continued | ||
13 | Fogs on while turning p6 | Yes | FEM_BODY | 3062 | MAPPING_abbiegel_R_output | Off | nsw_r | continued | ||
14 | ||||||||||
15 | Fogs @ welcomelight p1 | Yes | FEM_BODY | 3063 | MAPPING_NEBELSCHW_L_PART_OF_WL | nicht aktiv | Soft_on | welcome light | ||
16 | Fogs @ welcomelight p2 | Yes | FEM_BODY | 3063 | MAPPING_NEBELSCHW_R_PART_OF_WL | nicht aktiv | Soft_on | welcome light | ||
17 | ||||||||||
18 | Leds @ backing up | Yes | FEM_BODY | 3070 | OVT_BEI_RUECKFAHRLICHT | nicht aktiv | aktiv | Leds on doorhandle will light up when driving backwards | ||
19 | ||||||||||
20 | Ambiance light brighter | Yes | FEM_BODY | 3070 | Ambiente_Helligkeit | wert_01 | wert_01 | 0,64 | 0,99 | Brightness Ambient light |
21 | Ambient light independant from cluster | Yes | FEM_BODY | 3070 | Ambiente_Nachfuehrung | Aktiv | nicht aktiv | Brightness setting of Ambient light becomes independant from the brightness setting of the instrument cluster. | ||
22 | WL timer @ locking | Yes | FEM_BODY | 3070 | IB_Einschalt_begr_lok | wert_01 | wert_01 | 8 | choice | Amount of seconds that interior lights will remain on while locking |
23 | WL timer @ unlocking | Yes | FEM_BODY | 3070 | IB_Einschalt_begr_ulok | wert_01 | wert_01 | 8 | choice | Amount of seconds that interior lights will remain on while unlocking |
24 | WL brightness | Yes | FEM_BODY | 3070 | WL_HELLIGKEIT | wert_01 | wert_01 | 0,64 | 0,94 | |
25 | ||||||||||
26 | Side mirror memory | No | FEM_BODY | 3110 | ASP_Memory_verbaut | nicht aktiv | aktiv | Set memory side mirrors (memory saved on profile/fob?) Testing needed with car that has foldable mirrors, does not work if you dont have foldable mirrors | ||
27 | Side mirror @ paralel parking | No | FEM_BODY | 3110 | ASP_bordsteinautomatik | nicht aktiv | aktiv | Code for making the side mirror go down when parking. Memory setting required | ||
28 | Side mirror motor | Yes | FEM_BODY | 3110 | ASP_BEIKLAPPEN | nicht aktiv | aktiv | Side mirror engine built in yes/no | ||
29 | Side mirror fob p1 | Yes | FEM_BODY | 3110 | ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN | nicht aktiv | aktiv | Closing side mirror with Fob | ||
30 | Side mirror fob p2 | Yes | FEM_BODY | 3110 | ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN | nicht aktiv | aktiv | Opening side mirror with Fob | ||
31 | Side mirror fob p3 | Yes | FEM_BODY | 3110 | ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN | wert_01 | wert_01 | 28 (40km/h) | choice (14=20km/h) | Speed @ which the sidemirror will auto-unfold |
32 | ||||||||||
33 | Turn signal front left | Yes | FEM_BODY | 3061 | FRA_V_L_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
34 | Turn signal front left | Yes | FEM_BODY | 3061 | FRA_V_L_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
35 | Turn signal front left | Yes | FEM_BODY | 3061 | FRA_V_L_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
36 | Turn signal front right | Yes | FEM_BODY | 3061 | FRA_V_R_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
37 | Turn signal front right | Yes | FEM_BODY | 3061 | FRA_V_R_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
38 | Turn signal front right | Yes | FEM_BODY | 3061 | FRA_V_R_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
39 | ||||||||||
40 | AutoStart&Stop | Yes | FEM_BODY | 3023 | TCM_MSA_MEMORY | aktiv | nicht aktiv | AutoStart&Stor remember last state at start | ||
41 | AutoStart&Stop | Yes | FEM_BODY | 3023 | TCM_MSA_DEFAULT_OFF | nicht aktiv | aktiv | AutoStart&Stor off by default | ||
42 | ||||||||||
43 | Unlock All doors when in P | FEM_BODY | 3040 | LM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK | aktiv | nicht aktiv | When vehicle is turned off, all doors unlock auto | |||
44 | ||||||||||
45 | ||||||||||
46 | Module: HU_CIC | Standard | Changed | |||||||
47 | DVD speedlock part1 | Yes | HU_CIC | 3000 | SPEEDLOCK_X_KMH_MIN | 3_kmh = 3 or 8_kmh = 8 | value = FF | Disable DVD Speedlock - Part 1 | ||
48 | DVD speedlock part2 | Yes | HU_CIC | 3000 | SPEEDLOCK_X_KMH_MAX | 3_kmh = 3 or 8_kmh = 8 | value = FF | Disable DVD Speedlock - Part 2 | ||
49 | Video handbrake | Yes | HU_CIC | 3000 | VIDEO_NUR_MIT_HANDBREMSE | active = 01 | not active = 00 | Video just in combination with handbrake | ||
50 | DVD region | Yes | HU_CIC | 3001 | AREA_CODE_DVD | Change DVD region code. EVENTUALLY THIS WILL LOCK IF YOU CHANGE IT TOO OFTEN (Rumored to be 7 changes max) | ||||
51 | ||||||||||
52 | Surround slider | Yes | HU_CIC | 3000 | L7_SURROUND_CONFIG | Replaces "Surround" on/off checkbox with "L7 Surround" Slider (-5/+5) on Settings=>Tone screen | ||||
53 | Range | Yes | HU_CIC | 3000 | HUD_DISTANCE_INFO | I presume this is iBrake Distance for Active Cruise Control | ||||
54 | ||||||||||
55 | Setting for DRL in iDrive | Yes | HU_CIC | 3000 | Daydriving_light | Perm_off | standard | Adds DRL on/off as an option in the idrive (most euro countries are forced DRL while its no required by law) | ||
56 | ||||||||||
57 | DAB radio | partly | HU_CIC | 3002 | Radio_dab | nicht aktiv | aktiv | Digitale radio (digital tuner required ofc) | ||
58 | DAB radio 2 | partly | HU_CIC | 3002 | Dab_laendervarianten | nicht aktiv | ece | Limited success, i get more stations in the FM range, but nothing in the actual DAB section. | ||
59 | DAB radio 3 | partly | HU_CIC | 3002 | dab_standard | nicht aktiv | dab | Also the 'saved stations' no longer work. | ||
60 | DAB radio 4 | partly | HU_CIC | 3002 | following_available | nicht aktiv | aktiv | Also started receiving RDS info on some stations (song name etc) I do not get this on my car w/o these options | ||
61 | DAB radio 5 | partly | HU_CIC | 3002 | following_dab_fm | |||||
62 | ||||||||||
63 | Alarm soundlock | Yes | HU_CIC | 3000 | Acoustical_lock_confirm | nicht aktiv | aktiv | OEM alarm required, will give option in idrive to make audible sound when locking/unlocking the car | ||
64 | ||||||||||
65 | Sport Display | Yes | HU_CIC | 3000 | EFF_DYN_SPORT_CID | nicht aktiv | aktiv | Sport display. (Doesn't work on diesel? If you have a diesel car and this works, PLEASE let me know) | ||
66 | Sport Display BHP / KW | Yes | HU_CIC | 3000 | EFF_DYN_SPORT_UNIT | nicht aktiv | aktiv | In iDrive under language selection, the option to change values for Sport display are available (KW to BhP etc) | ||
67 | ||||||||||
68 | Own ringtone | Yes | HU_CIC | 3003 | Inband_ringing | nicht aktiv | aktiv | Ringtone from phone is used. | ||
69 | Configure sport mode | Yes | HU_CIC | 3000 | Macro_fds | popup_only | popup_and_config | you can configure the sport mode in idrive | ||
70 | ||||||||||
71 | Navi indicates fuelstop | Yes | HU_CIC | 3000 | NAVI_FUELSTOP_PROPOSAL | nicht_aktiv | aktiv | Go to "Route Information" on iDrive when you're going somewhere and it will tell you at what point(s) along your journey you'll likely need to fill up. You can then select that notice and it will tell you about the stations in the area at that point on your trip. | ||
72 | ||||||||||
73 | ||||||||||
74 | Module: HKFM | Standard | Changed | |||||||
75 | Trunk close button | Yes | HKFM | 3010 | SCH_TOEHKI | not active = 00 | active = 01 | Button on driver-side will be enabled to CLOSE the trunk (Requires hardware that is possibly only available in the f10) | ||
76 | Trunk close Fob | Yes | HKFM | 3010 | SCH_FBD | nicht_aktiv | aktiv | Button on key fob will be enabled to CLOSE the trunk (F10 only) | ||
77 | Trunk close p2 | Yes | HKFM | 3010 | TASTER_FBD | nicht_aktiv | aktiv | Button on key fob will be enabled to CLOSE the trunk (F10 only) | ||
78 | ||||||||||
79 | ||||||||||
80 | Module: KOMBI | Standard | Changed | |||||||
81 | Faster Hud startup | Yes | KOMBI | 3000 | HUD_START_UP_SCREEN_ANZ_ZEIT | At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no display | ||||
82 | ||||||||||
83 | ||||||||||
84 | Module: HU_NBT | Standard | Changed | |||||||
85 | Video in motion p1 | HU_NBT | 3000 | VIDEO_HANDBRAKE | aktiv | nicht_aktiv | Disables Video in motion speedlock | |||
86 | Video in motion p2 | HU_NBT | 3000 | VIDEO__FRONT_LOCKED | aktiv | nicht_aktiv | Disables Video in motion speedlock | |||
87 | Video in motion p3 | HU_NBT | 3000 | SPEEDLOCK_X_KMH_MAX | werte=00 | werte=FF | Disables Video in motion speedlock | |||
88 | Video in motion p4 | HU_NBT | 3000 | SPEEDLOCK_X_KMH_MIN | werte=01 | werte=FF | Disables Video in motion speedlock | |||
89 | ||||||||||
90 | Manual in motion | HU_NBT | 3000 | SL06_IBA_1 | aktiv | nicht_aktiv | Allow viewing of manual while moving | |||
91 | Manual in motion | HU_NBT | 3000 | SL07_IBA_2 | aktiv | nicht_aktiv | Allow viewing of manual while moving | |||
92 | Manual in motion | HU_NBT | 3000 | SL21_IBA_3 | aktiv | nicht_aktiv | Allow viewing of manual while moving | |||
93 | ||||||||||
94 | Navi fuel stop | HU_NBT | 3000 | NAVI_FUELSTOP_PROPOSAL | aktiv | Go to Rte Info, will show likely fuel stops; then select notice & iDrive will show gas stations at that pt | ||||
95 | ||||||||||
96 | Tire pressure & temp | HU_NBT | 3001 | RDC_SAFETY | nicht_aktiv | aktiv | Show tire pressure and temps | |||
97 | ||||||||||
98 | ||||||||||
99 | Module: REM | Standard | Changed | |||||||
100 | See description | Yes | REM | 3201 | CUT_OFF_SPEED | werte = 0F | Change to own preference | Max speed when visible and audible warning is given with PDC (km/h in hexadecimals) | ||
101 | See description | Yes | REM | 3201 | CUT_OFF_SPEED_HYST | werte = 01 | Change to own preference | Adjustment above or below to CUT_OFF_SPEED (in km/h hexadecimal) | ||
102 | ||||||||||
103 | Side Tail Lights (DRL) | Yes | REM | 3062 | MAPPING_TAGFAHRL_H_L_OUTPUT | off | sl_l | Turns left side tail light (only outside part) on with DLR | ||
104 | Side Tail Lights (DRL) | Yes | REM | 3062 | MAPPING_TAGFAHRL_H_R_OUTPUT | off | ls_r | Turns right side tail light (only outside part) on with DLR | ||
105 | Side Tail Lights (DRL) | Yes | REM | 3063 | MAPPING_UNIVERSAL_6_OUTPUT | off | sl_2_l | Turns left side tail light (only inside part) on with DLR | ||
106 | Side Tail Lights (DRL) | Yes | REM | 3063 | MAPPING_UNIVERSAL_7_OUTPUT | off | sl_2_r | Turns right side tail light (only inside part) on with DLR | ||
107 | Side Tail Lights (DRL) | Yes | REM | MAPPING_TAGFAHRL_H2_L_OUTPUT | off | sl_2_l | ||||
108 | Side Tail Lights (DRL) | Yes | REM | MAPPING_TAGFAHRL_H2_R_OUTPUT | off | sl_2_r | ||||
109 | Side Tail Lights (DRL) | Yes | REM | MAPPING_UNIVERSAL_6_PWM_LEVEL_1 | 0 | 64 | ||||
110 | Side Tail Lights (DRL) | Yes | REM | MAPPING_UNIVERSAL_7_PWM_LEVEL_1 | 0 | 64 | ||||
111 | ||||||||||
112 | See description | Yes | REM | 3203 | V_SCHWELLE_1 | werte = 24 | werte = FF | Max. speed to disable top camera view (FF = 255 km/h) | ||
113 | See description | Yes | REM | 3203 | V_SCHWELLE_2 | werte = 0F | werte = FF | Max speed to disable rear camera view (FF = 255 km/h) | ||
114 | See description | Yes | REM | 3203 | D_SCHWELLE_1 | werte = 32 | werte = FF | Max distance in meters to disable top camera view (FF = 255 meters) | ||
115 | See description | Yes | REM | 3203 | D_SCHWELLE_2 | werte = 0A | werte = FF | Max distance in meters to disable rear camera view (FF = 255 meters) | ||
116 | ||||||||||
117 | Turn signal rear left | Yes | REM | 3061 | FRA_H_L_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
118 | Turn signal rear left | Yes | REM | 3061 | FRA_H_L_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
119 | Turn signal rear left | Yes | REM | 3061 | FRA_H_L_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
120 | Turn signal rear right | Yes | REM | 3061 | FRA_H_R_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
121 | Turn signal rear right | Yes | REM | 3061 | FRA_H_R_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
122 | Turn signal rear right | Yes | REM | 3061 | FRA_H_R_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
123 | ||||||||||
124 | Backup (reverse) light left | Yes | REM | 3061 | RFS_L_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
125 | Backup (reverse) light left | Yes | REM | 3061 | RFS_L_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
126 | Backup (reverse) light left | Yes | REM | 3061 | RFS_L_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
127 | Backup (reverse) light right | Yes | REM | 3061 | RFS_R_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
128 | Backup (reverse) light right | Yes | REM | 3061 | RFS_R_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
129 | Backup (reverse) light right | Yes | REM | 3061 | RFS_R_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
130 | ||||||||||
131 | Brake light left | Yes | REM | 3061 | BL_L_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
132 | Brake light left | Yes | REM | 3061 | BL_L_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
133 | Brake light left | Yes | REM | 3061 | BL_L_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
134 | Brake light right | Yes | REM | 3061 | BL_R_KALTUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
135 | Brake light right | Yes | REM | 3061 | BL_R_WARMUEBERWACHUNG | aktiv | nicht aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
136 | Brake light right | Yes | REM | 3061 | BL_R_IS_LED | nicht aktiv | aktiv | If you had install led bulbs. Disable on board chek for burn bulbs | ||
137 | ||||||||||
138 | ||||||||||
139 | Module: KOMBI | Standard | Changed | |||||||
140 | DigiSpeed | Yes | KOMBI | 3000 | BC_Digital_V | nicht aktiv | aktiv | Digital speed in BC cluster | ||
141 | ||||||||||
142 | Instrument Cluster background | Yes | KOMBI | 3001 | HINTERGRUND_FARBE_NACHT | Orange | Orange/Grau | Set to orange/grau to get the light orange or greyish lines as background for your instrument cluster (Only for instrument cluster high) | ||
143 | Instrument Cluster background | Yes | KOMBI | 3001 | HINTERGRUND_FARBE_TAG | Orange | Orange/Grau | Same as above, but for daytime | ||
144 | ||||||||||
145 | Witte cluster menu | Yes | KOMBI | 3007 | DIM_NACHT_EIN | Aktiv | Aktiv | 32 | FF | White instrument cluster instead of orange @ night. It disables the navi switch to night as well. |
146 | M performance logo in Dash | Yes | KOMBI | 3000 | BMW_LOGO | AG | MPM | Displays M performance logo in the cluster instead of BMW logo when starting car. (should be one for CIC sidplay too somewhere) | ||
147 | ||||||||||
148 | ||||||||||
149 | Module: ASCM | Standard | Changed | |||||||
150 | Seatbelt alarm driver | Yes | ACSM | 3000 | SBR_FA_GWF_SBR_FA | active = 01 | not active = 00 | disable seat belt reminder - driver | ||
151 | Seatbelt alarm passenger | Yes | ACSM | 3000 | SBR_BF_GWF_SBR_BF | active = 01 | not active = 00 | disable seat belt reminder - passenger | ||
152 | ||||||||||
153 | Display seatbelt driver | Yes | ACSM | 3000 | Gurtzustandsanzeige_Fahrer_GWF_GZA_FA | active = 01 | not active = 00 | disable seat belt status display - driver | ||
154 | Display seatbelt passenger | Yes | ACSM | 3000 | Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF | active = 01 | not active = 00 | disable seat belt status display - passenger | ||
155 | ||||||||||
156 | No sound seatbelt driver | ACSM | 3000 | SPW_FA | active = 01 | not active = 00 | disable sound on disconnect SB - driver | |||
157 | No sound seatbelt passeger | ACSM | 3000 | SPW_BF | active = 01 | not active = 00 | disable sound on disconnect SB - passenger | |||
158 | ||||||||||
159 | Seatbelt reminder | Yes | ACSM | 3001 | Gwf_SBR_Warndauer | 100sec | 25sec | 64 | 19 | Seatbelt warning still on, but bitches longer/shorter |
160 | ||||||||||
161 | Module: ICM | Standard | Changed | |||||||
162 | Always start in ecopro | ICM | 3000 | ICMKOD_B_INITECO | nicht_verbaut | verbaut | Enables always starting in EcoPro |