Instrument Status
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
$
%
123
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ABCDEF
1
TEM facilities in Engineering Hall 1131-1151
2
Instrument:Status:Rule 1:
3
Nion STEMoperationalYou can book maxium of 10 hours in total during regular hours (8am-8pm) so more users can accees to this instrument. Please data storage and transfer and computer usage policy. Do not use any external drive or USB drive to transfer your data. Please upload your data to our server from Gatan PC.
4
JEOL Grand ARMoperationalFor detailed rules, see usage policy at http://www.imri.uci.edu/content/instrument-usage-policy
5
JEOL-2800 TEMoperationalYou can book only 8 hours in total during regular hours in one week so more users can accees to this instrument. Please follow data storage and transfer and computer usage policy. Do not use any external drive or USB drive to transfer your data. Please upload your data to our server from Gatan PC. You are not allowed to book more than three weeks ahead of time. If some one cancel his or her session at the last minute or there is any opening within 48 hrs, anybody can take the opening, even if the person already have maximum hours of reservation.
6
JEOL-2100F TEMoperationalYou can book only 8 hours in total during regular hours in one week so more users can accees to this instrument. There are two sessions during regular hours: 9am-1pm and 1pm - 5pm. Please follow the computer usage policy to store and transfer data from Gatan PC. Do not use any external hard-drive or external USB device to transfer your data. You are not allowed to book more than three weeks ahead of time. If some one cancel his or her session at the last minute or there is any opening within 48 hrs, anybody can take the opening, even if the person already have maximum hours of reservation.
7
Tescan GAIA3 SEM-FIBoperationalPt GIS is working
8
Sputter Coater ACE600operational
9
Sputter Coater ACE200operational
10
Leica Grid Plunderoperational
11
Gatan PIPSIIoperational
12
Fischione Nanomilloperational
13
14
Surface Science Facility-1322 Calit2 Building
15
Instrument:Status:Rule 1:Rule 2:Rule 3:
16
Kratos SupraoperationalPlease use the new reservation system
17
18
Calit2 Microscopy Center- 1302 Calit2 Building
19
Instrument:Status:Rule 1:Rule 2:Rule 3:
20
Magellan SEMoperational
For detailed rules, see usage policy at http://www.imri.uci.edu/content/instrument-usage-policy
21
Oxford EDS system for Magellan SEMOperationalEDS detector is optimized at 5 mm WD. INCA software is fully functional. AZtec software has basic functions. Advanced functions are not available for AZtec software.
22
EBL system for Magellan SEMOperational
23
STEM attachment for Magellan SEMOperational
24
Kleindick system for MagellanOperational
25
FEI Quanta 3D FEG Dual Beam: SEMOperational
For detailed rules, see usage policy at http://www.imri.uci.edu/content/instrument-usage-policy
Down (7/13-20/2018
26
FEI Quanta 3D FEG Dual Beam: FIBOperational
27
Oxford EBSD system for Quanta 3DOperational
28
Oxford EDS system for Quanta 3DOperational
29
Omni probe for Quanta 3DOperational
30
31
Rigaku SmartLab XRD OperationalIf you plan to measure samples using high resolution monochromators or high temperature furnaces, please contact Qiyin in advance.
32
Rigaku Ultima III XRD operational with BB/PB opticsNew X-ray tube with max power of 40kV/30mA!
33
34
35
SBT D500i - Dimpler®OperationalDo not allow slurry to drip into the shaft. Clean the polishing wheels after use.in 1302 Calit2 building
36
SBT Lapping Film PolisherOperationalUser must use own lapping films (not provided)
37
SBT Plasma CleanerOperational
38
SBT Slow Speed Diamond SawOperationalUser must use own blade
39
SBT Sputter Coaterout of servicePlease get trained and use the new coaters in LEXI
40
41
Nano-Metrology Lab-1301 Calit2 Building
42
Instrument:Status:Rule 1:Rule 2:Rule 3:
43
PNI Nano-R AFM (Atomic Force Microscope)moved to INRFTransfer your data by using UCI webfiles. Flash drive is not allowed to use with the AFM computer. Scanner is fixed. Please make sure that your sample does not hit the scanner!
44
Vibrometeroperational
45
Nano_CToperationaltraining waiting list at https://docs.google.com/spreadsheet/ccc?key=0AlVa2cfmNf6XdEhkQnJoc0NDS3ZDVkktcDZ1ZjZiUnc#gid=0
46
Glove box evaporatoroperational
Please instrument usage policy for special rules and tips at http://www.imri.uci.edu/content/instrument-usage-policy

47
48
MC2-Engineering Tower 140
49
Instrument:Status:Rule 1:Rule 2:Rule 3:
50
FEI/Philips CM-20 TEM (LaB6)operationalContact Dr. Zheng if you need to use the double tilt holder. Please NEVER pull the cable when disconneting the cable from double tilt specimen holder! Please use single tilt specimen holder. Follow the sample loading/unloading procedure carefully. Reset the parameter settings if you change!! New filament. Please use the new filament emision limit: 20
51
Gatan TEM CCD camera (4k x 2.6k)operationalMake sure that your sample is not falling from the grid. Dropped samples may cause problem for the CCD camera
52
EDS system on CM-20 TEMoperational
53
Stero-microscope for TEM holder checkingoperational
54
Double-tilt TEM specimen holderoperational
55
FEI/Philips XL-30 FEG SEMoperationalfixed
56
Thermo EDS system on XL30operational
57
Sputter coater (Au/Pd target)operational
58
Siemens D5000 XRDout of service
59
compund optical microscope with CCD cameraoperational
60
Stero-microscope for sample preparationoperational
61
Nikon Epiphot reflected optical microscope 1operationalmoved to 1301 Calit2 Building
62
Nikon Optiphot -POL transmitted light optical microscopeoperational
63
Oven (<1000C)operationalWear safety goggle,
64
RMC ultramicrotome operational
65
SBT 900 - 8" Grinder/PolisheroperationalWear safety goggle and gloves
66
SBT 910 - 8" Grinder/PolisheroperationalWear safety goggle and gloves
67
SBT abrasive slurry disk cutter (3 mm disk)operationalWear safety goggle
68
SBT Slow Speed Diamon SawoperationalWear safety goggle
69
Twin jet polisheroperationalYou must receive special training and have an approved operation procedure before using it.  Wear lab coats, goggle and appropriate gloves ,
70
Ion mill (with cold stage)operationalNew SOP is with the instrument. Please follow the guideline outlined below: a) make sure that the Ar gas pressure is about 30psi, b) turn on chiller before starting the gun, c) purge the chamber for 10 mins if the machine is not used for a day. To purge the chamber, start the guns by setting both kV and current to zero. d) if you use one gun at a time only, please use top gun for less than 5 hrs and reverse your sample to use bottom gun for less than 5 hrs. e) After using cold stage, please pump the chamber down to 2e-5 torr and bake out the LN dewar for one hr. f) report problems immediately
71
Buehler SEM sample mounting machineoperationalWear safety goggle
72
Buehler-1 Polisherout of serviceWear safety goggle and gloves
73
Carbon/metal evaperator operationalWear safety goggle
74
75
76
Others
77
Instrument:Status:Rule 1:Rule 2:Rule 3:
78
SimplewareoperationalThe software license can only be used by one person at a time. Users must make a reservation and then use the software during the reserved time. Your access to the software may be denied for the violation of this policy.To get access to simpleware software reservation system, you need to sign up at https://docs.google.com/spreadsheets/d/1Rdn-ziG6A2ve1-KSK7QenN-j3jlSUgdUnLkjt1tkWzs/edit#gid=0 and inform Dr. Zheng at jzheng@uci.edu
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...
Main menu