A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | ID | Name | Description | Printing Notes | File Link | |||||||||||||||||||||
2 | CA-1 | Crank Arm | Small crank arm. 2 arms. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_arm-1.STL | |||||||||||||||||||||
3 | CA-2 | Crank Arm | Small crank arm. 1 arm. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_arm-2.STL | |||||||||||||||||||||
4 | CH-1 | Crank Handle | Small crank handle. 2 handles. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none - After printing, twist the handle grips to break loose for free spinning. | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_handle-1.STL | |||||||||||||||||||||
5 | CH-2 | Crank Handle | Small crank handle. 1 handle. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none - After printing, twist the handle grip to break loose for free spinning. | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_handle-2.STL | |||||||||||||||||||||
6 | CHG-1 | Crank Handle Grip | Small crank handle grip. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_handle-grip-1.STL | |||||||||||||||||||||
7 | CP-1 | Crank Plate | Crank plate for small handles. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_plate-1.STL | |||||||||||||||||||||
8 | CS-1 | Crank Spindle | Small crank spindle. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_spindle-1.STL | |||||||||||||||||||||
9 | CS5-1 | Crank Shaft | Crank shaft for 5:1 drive shaft. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_shaft_5-1.STL | |||||||||||||||||||||
10 | CSS-1 | Crank Shaft Sleeve | Crank shaft sleeve. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/crank_shaft_sleeve-1.STL | |||||||||||||||||||||
11 | DS5-1 | Drive Shaft - output | 5:1 output drive shaft.18 mm. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/drive_shaft_5-1.STL | |||||||||||||||||||||
12 | DS5-2 | Drive Shaft - output | 5:1 output drive shaft. Lockable. 18.75 mm. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/drive_shaft_5-2.STL | |||||||||||||||||||||
13 | DS5-3 | Drive Shaft - input | 5:1 input drive shaft. Lockable. 28.3 mm. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/drive_shaft_5-3.STL | |||||||||||||||||||||
14 | DS5-3-2 | Drive Shaft - input | 5:1 input drive shaft. Lockable. 28.3 mm. Tight fit on sun gear side. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | ||||||||||||||||||||||
15 | DS5-4 | Drive Shaft - input | 5:1 input drive shaft. 55 mm. | - Infill: 100% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/drive_shaft_5-4.STL | |||||||||||||||||||||
16 | FC-1 | Fan Cage | Fan cage for fan prop. Acts as a protective covering and an air inlet. Meant to take advantage of the Coandă effect. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/fan_cage-1.STL | |||||||||||||||||||||
17 | FF-1 | Fan Funnel | Fan funnel. Acts as a ducted fan outlet and stabilizer for a fan prop. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/fan_funnel-1.STL | |||||||||||||||||||||
18 | FP5CC-1 | Fan Prop | Fan Prop. 5 blades. Counter-clockwise rotation. 90 mm diameter. 15 mm blade height. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: maybe raft or brim | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/fan_prop_5CC-1.STL | |||||||||||||||||||||
19 | GC2-1 | Gearbox Cover | Gearbox cover for 2 planetary stages. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/gearbox_cover_2_stage-1.STL | |||||||||||||||||||||
20 | H-1 | Handle Half | 2 parts make a handle. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/handle-1.STL | |||||||||||||||||||||
21 | HP-1 | Handle Plate | Handle plate. 2 stage width. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/handle_plate-1.STL | |||||||||||||||||||||
22 | HPB-1 | Handle Plate Bracket Half | Bracket to lock the handle plate in place | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: built in | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/handle_plate_bracket_half-1.STL | |||||||||||||||||||||
23 | P-1 | Pin - short | Pin. 9.1 mm length. 5.4 mm diameter. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: optional raft if you have trouble with the first layer | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/pin-1.STL | |||||||||||||||||||||
24 | P-1-1 | Pin - short (tight fit) | Pin. 9.1 mm length. 5.6 mm diameter. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: optional raft if you have trouble with the first layer | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/pin-1-1.STL | |||||||||||||||||||||
25 | P-2 | Pin - long | Pin. 24.1 mm length. 7 mm diameter. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/pin-2.STL | |||||||||||||||||||||
26 | PCB5-1 | Planet Carrier Bottom | Planet carrier bottom for 5:1 gear stage. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planet_carrier_bottom_5-1.STL | |||||||||||||||||||||
27 | PCT5-1 | Planet Carrier Top | Planet carrier top for 5:1 gear stage. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planet_carrier_top_5-1.STL | |||||||||||||||||||||
28 | PGC5-1S15 | Planetary Gear Core | Planetary gear core. 5:1 ratio. Closed ring. Sleeve bearing. 0.15 mm tolerance. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | ||||||||||||||||||||||
29 | PGC5-2S10 | Planetary Gear Core | Planetary gear core. 5:1 ratio. Middle slots on ring. Sleeve bearing. 0.10 mm tolerance. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none - Other: This is a tight tollerance. If it feels too tight you can use a looser tolerance version such as PGC5-2S15 | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planetary_gear_core_5-2S10.STL | |||||||||||||||||||||
30 | PGC5-2S15 | Planetary Gear Core | Planetary gear core. 5:1 ratio. Middle slots on ring. Sleeve bearing. 0.15 mm tolerance. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none - Other: This is a loose tollerance. If it feels too loose you can use a tighter tolerance version such as PGC5-2S10 | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planetary_gear_core_5-2S15.STL | |||||||||||||||||||||
31 | PGSB-1 | Planet Gear Sleeve Bearing | Planet gear sleeve bearing. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planet_gear_sleeve_bearing-1.STL | |||||||||||||||||||||
32 | Pin Tool | Pin Tool | Used to insert small pins into sockets | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/pin_tool.STL | |||||||||||||||||||||
33 | PSC-1 | Planetary Stage Cover | Planetary stage cover. | - Perimeters: 3 - Infill: any/5% - Layer height: 0.2 mm - Supports: none | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/planetary_stage_cover-1.STL | |||||||||||||||||||||
34 | RB-1 | Roller Bearing | Roller Bearing. 22 mm OD. 8 mm ID. | - Infill: 100% - Layer height: 0.2 mm - Supports: optional raft if you have trouble with the first layer | https://github.com/gearfinity/gearfinity/blob/main/_all_parts/roller_bearing-1.STL | |||||||||||||||||||||
35 | ||||||||||||||||||||||||||
36 | ||||||||||||||||||||||||||
37 | ||||||||||||||||||||||||||
38 | ||||||||||||||||||||||||||
39 | ||||||||||||||||||||||||||
40 | ||||||||||||||||||||||||||
41 | ||||||||||||||||||||||||||
42 | ||||||||||||||||||||||||||
43 | ||||||||||||||||||||||||||
44 | ||||||||||||||||||||||||||
45 | ||||||||||||||||||||||||||
46 | ||||||||||||||||||||||||||
47 | ||||||||||||||||||||||||||
48 | ||||||||||||||||||||||||||
49 | ||||||||||||||||||||||||||
50 | ||||||||||||||||||||||||||
51 | ||||||||||||||||||||||||||
52 | ||||||||||||||||||||||||||
53 | ||||||||||||||||||||||||||
54 | ||||||||||||||||||||||||||
55 | ||||||||||||||||||||||||||
56 | ||||||||||||||||||||||||||
57 | ||||||||||||||||||||||||||
58 | ||||||||||||||||||||||||||
59 | ||||||||||||||||||||||||||
60 | ||||||||||||||||||||||||||
61 | ||||||||||||||||||||||||||
62 | ||||||||||||||||||||||||||
63 | ||||||||||||||||||||||||||
64 | ||||||||||||||||||||||||||
65 | ||||||||||||||||||||||||||
66 | ||||||||||||||||||||||||||
67 | ||||||||||||||||||||||||||
68 | ||||||||||||||||||||||||||
69 | ||||||||||||||||||||||||||
70 | ||||||||||||||||||||||||||
71 | ||||||||||||||||||||||||||
72 | ||||||||||||||||||||||||||
73 | ||||||||||||||||||||||||||
74 | ||||||||||||||||||||||||||
75 | ||||||||||||||||||||||||||
76 | ||||||||||||||||||||||||||
77 | ||||||||||||||||||||||||||
78 | ||||||||||||||||||||||||||
79 | ||||||||||||||||||||||||||
80 | ||||||||||||||||||||||||||
81 | ||||||||||||||||||||||||||
82 | ||||||||||||||||||||||||||
83 | ||||||||||||||||||||||||||
84 | ||||||||||||||||||||||||||
85 | ||||||||||||||||||||||||||
86 | ||||||||||||||||||||||||||
87 | ||||||||||||||||||||||||||
88 | ||||||||||||||||||||||||||
89 | ||||||||||||||||||||||||||
90 | ||||||||||||||||||||||||||
91 | ||||||||||||||||||||||||||
92 | ||||||||||||||||||||||||||
93 | ||||||||||||||||||||||||||
94 | ||||||||||||||||||||||||||
95 | ||||||||||||||||||||||||||
96 | ||||||||||||||||||||||||||
97 | ||||||||||||||||||||||||||
98 | ||||||||||||||||||||||||||
99 | ||||||||||||||||||||||||||
100 |