Precautions for drone flight.xlsx

	A	B	C	D
1	Precautions for drone flight
2	Serial number	First level title	Secondary title	Third level title
3	1	Check the work before starting up	Check the arm of the drone	Check if the arm of the drone can be fully deployed without any looseness.
4				Check if the propellers of the drone are damaged, and replace them with new ones if they are damaged.
5				Check if the propellers sequence of the four arms of the drone is installed correctly.
6				Check if the propellers of the drone are securely installed, and if a screw structure is used, if it is tightened.
7			Check propellers of the drone	Check whether the propellers of the drone are intact. If they are aged, damaged or deformed, please replace them with new ones.
8				The propellers of the drone are divided into forward and reverse propellers. Check whether the propellers of the four arms of the drone are installed in the correct order.
9				Check whether the propellers of the drone are firmly installed. If they are screwed, check whether they are tightened.
10				When replacing propellers, do not mix propellers of different models.
11			Check the battery of the drone	Check if the battery has sufficient charge.
12				The new battery requires three charge and discharge cycles to reach optimal performance, activate the chemical activity of the battery itself, and ensure that the drone can properly monitor and manage its charge.
13				Check for battery expansion, cracking, or other abnormalities. If so, it cannot be used anymore.
14				Check if there are enough batteries carried to ensure they are sufficient.
15			Check the camera of the drone	Check if the lens film of the camera has been torn off, otherwise it will affect the shooting quality.
16				Check if there are fingerprints or other stains on the camera, and clean it if there are.
17				Check if the camera has scratches or other damages, and if so, investigate whether it can continue to be used.
18				Check whether the wiring inside the camera is normal, and whether there is rust or other abnormalities in the internal structure.
19			Check the memory card	Check if the memory card is damaged or has any other abnormalities.
20				Check if the drone can insert the memory card properly.
21				Check if the drone's memory card is readable. If not, format it and try again.
22				Check if the pictures and videos captured by the drone are saved properly.
23				Check if the capacity of the memory card is sufficient.
24			Check the remote controller	Check if the remote controller cannot be turned on or if there are any other abnormalities. (Different remote controllers have different startup methods and cannot be confused)
25				Check if the remote controller has sufficient power.
26				Check if the available connection cables for the phone are properly arranged.
27				Check whether the joystick is pushed normally and whether the feedback of the buttons is normal.
28				Check if the joystick can be installed properly and securely.
29			Check your phone	Check if the phone has sufficient battery.
30				Check if the app has been downloaded on the phone, if it can be opened and used normally, and if permissions have been granted properly.
31				Check if the phone can be properly inserted into the phone holder, and if not, try removing the phone case.
32				Check if the phone can be inserted into the connection cable normally, and if not, try removing the phone case. (Only digital image transmission version of the drone)
33				Check if the phone can sincerely search for WiFi. (WiFi version only)
34	2	Preparation before takeoff	preparation	The drone arm is fully deployed; V11/V11PRO needs to open the tripod; Remove the gimbal protection cover of the drone; Install the joystick on the remote controller, turn on the antenna, and open the handle.
35			Power on	Check if the drone and remote controller are turned on normally.
36			Link the drone to the remote controller	Check whether the drone and remote controller can be linked. Some models need to be linked manually.
37			Connect APP	Check if you can connect to WiFi normally and enter the app normally.
38			Flight Mode	Check if the drone has sufficient GPS signal. (GPS mode)
39			Complete calibration	If the drone needs calibration, it should be completed normally.
40				Check the compass interference value on the APP interface. If it exceeds 120, it is recommended to manually calibrate the compass.
41				Arriving in an unfamiliar flying environment, it is recommended to perform calibration.
42			Check the flight environment	Check the weather conditions before flying and avoid flying in adverse weather conditions such as strong winds and heavy rain
43				Check if the flight environment is open and free from obstacles.
44				Select the horizontal plane as the takeoff surface.
45				It is not recommended to take off from metal surfaces such as cars or steel plates, as this may interfere with the drone's compass and cause uncontrolled flight.
46				When placing the drone, face the tail of the drone. (The camera of the drone is facing the nose)
47			Unlock takeoff	Check if the drone can unlock and take off normally.
48			Unlock takeoff	In unfamiliar environments, it is recommended to hover for a moment to confirm the stability of the drone flight.
49	3	During the flight process	flight safety	Choose an open and unobstructed outdoor area for flying.
50				Avoid low altitude flying and try to increase the drone's flight altitude above the height of surrounding obstacles.
51				Maintain line of sight and try to ensure that the drone flies within the line of sight. If flying over long distances, it is important to avoid obstacles.
52				If flying in complex scenarios, it is recommended that one person controls the drone while the other person is responsible for observing the flight environment to ensure flight safety.
53				Avoid crowds and obstacles to reduce the risk of accidents.
54				Stay away from no fly zones such as airports.
55				Comply with local drone regulations and protect privacy.
56				During the flight, do not grab the rotating propellers with your hands, otherwise the blades may cut your fingers.
57				Do not place the drone on your palm for takeoff or landing to avoid the propellers cutting your hands.
58				Do not make or receive calls, send messages, or other operations that interfere with control during the flight.
59				Be careful to avoid small and transparent obstacles, such as birds, kite lines, branches, glass walls, and do not fly close to the water surface.
60			Precautions during flight	During long-distance flight, aim your phone and remote controller at the position of the drone.
61				Maintain the smoothness of the phone and activate airplane mode if necessary.
62				If encountering strong winds, it is recommended to switch to sport mode.
63				Pay attention to the drone's battery level and reserve a certain amount of power for the drone to return.
64				Regularly check the status of the remote controller and drone: always pay attention to the signal strength and flight status of the drone to ensure that it will not lose contact or suddenly lose control during the flight process.
65				Should be unfolded and the remote controller position should be adjusted to ensure that the remote controller is always aimed at the flight position of the drone for optimal communication.
66			Landing precautions	When the battery is low or the flight mission is completed, choose an open area to slowly land and ensure the safe landing of the drone.
67				If encountering problems such as low battery, signal interference, etc., the drone should be controlled to fly back slowly and land as much as possible to avoid emergency landing or crash.
68				Manually control the drone to land, and keep pushing the throttle stick down until the motor stops turning.
69				After the drone lands, wait until the motor stops rotating completely before turning off the remote controller power, otherwise the drone may perform automatic return due to signal disconnection.
70	4	Precautions for aerial photography	Before aerial photography	Check the drone to ensure it is undamaged and in normal working condition.
71			Before aerial photography	Before flying, ensure that the drone's battery and remote controller have sufficient power, normal frequency matching, and the memory card can read and save videos normally.
72			Safety precautions	When flying in unfamiliar environments, it is recommended to calibrate the drone first to ensure precise operation. After the drone takes off, it is recommended to hover for a moment to confirm its stable flight.
73			Safety precautions	Have a sense of safety during the flight, pay attention to staying away from obstacles and crowds when flying at long distances, and operate the camera by watching the footage while keeping an eye on the drone's flight position when flying at close distances to avoid collisions.
74			During the aerial photography process	During aerial photography, each action should last for at least fifteen seconds. For example, when conducting forward shooting, simply control the drone to fly forward, avoiding simultaneous turning, lens adjustment, or other operations to ensure the smoothness and stability of the video and improve shooting quality.
75				When operating, the movements should be slow and precise, avoiding sudden turns or rapid acceleration, and preventing loss of control or blurry images.
76				At the beginning of aerial photography, it is recommended to familiarize oneself with the joystick movements and the feedback generated by the amount of hitting the joystick. First, master the basic aerial photography movements, such as advancing in six directions, and then perform other aerial photography movements.
77				The drone function can be utilized to maintain the stability of the image. For example, cruise control enables drones to fly steadily.
78				To alleviate the pressure of post production editing, it is recommended to start recording only during aerial photography, rather than recording the entire process. This can focus more on ensuring the quality of aerial footage.
79	5	Daily maintenance precautions		When storing the remote controller, if the connection cable is placed in the remote controller, please close the phone clamp normally according to the structure of the remote control to avoid damage to the connection cable.
80				When storing the drone, please place the drone correctly according to the structure of the storage bag. Incorrect placement may squeeze the propeller, causing deformation and damage to the propeller.
81				Place the drone in a dry, cool place, away from direct sunlight and high temperatures.
82				Avoid collisions and damage when transporting and storing drones, and avoid other metal objects or magnetic fields that may interfere with the drones.
83				Avoid excessive discharge or charging of the battery, and replace it promptly if it is damaged.
84	6	Precautions for using drones in winter: Drones are powered by lithium batteries, and low temperature environments can seriously reduce the performance of lithium batteries, resulting in insufficient endurance. When the battery is exposed to temperatures below 15 ℃, it begins to have an impact and its performance deteriorates as the temperature drops.		Before flying, be sure to fully charge the battery and ensure that it is in a high voltage state.
85				Preheat the battery to above 25 degrees Celsius to reduce its internal resistance.
86				It is not recommended to fly outdoors in rainy or snowy weather to avoid short circuits caused by water or moisture inside the drone.
87				If there is snow, mud, etc. on the takeoff ground, please use the apron to assist the drone in taking off and avoid snow entering the bottom ventilation opening of the drone, causing a short circuit on the circuit board. In addition, the apron can effectively prevent foreign objects from being sucked into the motor by the propeller power during drone takeoff.
88				After using the drone, please promptly place it in the storage bag for storage.
89
90
91
92
93
94
95
96
97
98
99
100