Barcode/UNT Number

Electr. OCLC No.

Available HT 08/04/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334440

Development of a permanently fire-resistant cotton fabric by reaction with organoboron compounds /

Available HT 10/20/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334150

Theoretical and experimental studies on airloads related to hypersonic aeroelastic problems of general slender pointed configurations /

Available HT 08/04/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334309

Available HT 10/20/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334168

Available HT 08/04/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334317

Available HT 10/20/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095334465

Theoretical and experimental investigation of some new longitudinal handling qualities parameters /

Theoretical prediction of pressures in hypersonic flow with special reference to configurations having attached leading-edge shock. Part III, Experimental measurements of forces at Mach 8 and pressures at Mach 21 /

Development and evaluation of high temperature protective coatings for Columbium alloys. Part 1. Coating development /

Development and evaluation of high temperature protective coatings for Columbium alloys. Part 2. Coating evaluation /

Effect of creep-exposure on mechanical properties of Rene' 41. Part 2. Structural studies, surface effects, and re-heat treatment /

Development of methods and instruments for mechanical evaluation of refractory materials at very high temperatures /

Evaluation of the General Electric self-adaptive control system on the X-15 flight control simulator /

Copy has several cut pages. Obtain another if possible

Explorations in the measurement and prediction of contributions of one sample of scientists /

Available HT 10/20/22

https://babel.hathitrust.org/cgi/pt?id=mdp.39015095333939

Compressible boundary layer equations and stagnation point solution with differences in thermal and dynamic boundary layer thickness being considered /

Automatic landing system study. Part II, Results of ground equipment and data transmission studies /

Thermo-elastic equations for a sandwich panel under arbitrary temperature distribution, transverse load and edge compression /

Investigation of techniques and materials for the formation of high temperature (1500 F) inorganic fiber /

Normal spectral reflectance of anodized coatings on Aluminum, Magnesium, Titanium and Beryllium /

Tensile testing apparatus for short fine filaments with optical-mechanical strain measurement /

Flight simulation of orbital and reentry vehicles. Part 1. Development of equations of motion in six degrees of freedom /

Flight simulation of orbital and reentry vehicles. Part 2. A modified flight path axis system for solving the six-degree-of-freedom flight equations /

Flight simulation of orbital and reentry vehicles. Part 3. Aerodynamics information required for six degrees of freedom simulation /

Flight simulation of orbital and reentry vehicles. Part IV. A study of earth oblateness effects and characteristic oscillatory motions of a lifing reentry vehicle /

Analysis of refractory metals using a new solid source double focusing mass spectrometer /

Theoretical and experimental study of gas flow through cloth over a range of pressures and temperatures /

Effects of severe thermal and stress histories on material strength - rate process theory approach AISI 301 extra hard, PH 15-7 Mo RH, RENE' 41, 7075-T6 /

Biomedical effects of exposure to electromagnetic radiation. Part II. Biomedical effects on the eye from exposure to microwaves and ionizing radiations /

Adaptive techniques for long range transmission of pulse code modulation telemetry data /

Mechanical properties of Tantalum with special reference to the ductile-brittle transition : Part II /

Mechanical properties of Tantalum with special reference to the ductile-brittle transition : Part III /

Investigation of methods for determining actual flaw size in materials by nondestructive ultrasonic means. Part 2 /

Investigation of methods for determining actual flaw size in materials by nondestructive ultrasonic means /

Design criteria for bearing systems for use in high temperature aircraft electrical accessories. Phase 3 /