ABC
1
Instructions - TRAKKA Starlink Mount
2
3
4
Following the drawing above, measure, mark and drill out the mounitng holes.
Check the hole alignment with the packer. Use surface primer on any exposed metal.
Following the drawing above, install the mount using the bolts and sealant as directed.
5
6
Fit the cable gland and run the antenna plug side of the cable through. Allow a bit of slack in the cable and tighten the gland to secure the cable in place. Fit the antenna to the mount and drill the hole for padlock using pivot mount pre-drilled hole. Ensure the satellite is centralised.
7