QWC P&S 3a - http://bit.ly/QWC-SEV-systems
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
View only
 
 
ABCDEFGHIJK
1
2
QuantumWorks Powertrain Subsystems and Parts - when you are engineering your own electric and hybrid subsystems, consider lowering your project risk by purchasing from a team that uses what it sells. Below is a list of some of the most popular powertrain subsystems we use in our projects, we sell and support.
3
4
e-mail: info@ QuantumWorks.comphone/txt: +01-619-438-0018 Contact us details, pricing and lead-time on these systemsLink to this table ->http://bit.ly/QWC-SEV-systems
5
6
___Drive subsystems - features of all of our system kits:
7
Regenerative braking capability
8
IP67 sealed against debris/water incursion
9
Liquid-cooled for higher continuous/rated power and torque
10
CANbus controlledAxial Flux (AF) vs Radial Flux (RF) motors comparison
11
->Peak Performance Requirements: To produce the peak performance estimates indicated for each system, the ESS (energy storage subsystem a.k.a. battery pack) needs to provide the required peak discharge current. Continuous/Rated performance requires support cooling systems to meet flow rate and pressure minimum requirements indicated on data sheets.
12
->Systems typically include the following parts: motor, controller-inverter, controller chill plates (if controller-inverter doesn't have liquid-cooling built-in) and harnesses where applicable, and tech support - optional harnesses, optional soft-start pre-charge relays/fuses/contactors/resistors, optional soft-start parts in a shielded box, control paddles, etc. are available for some systems - contact us details, pricing and lead-time on these systems.
13
->Motor types/topologies: Axial Flux (AF) vs Radial Flux (RF) motors- of these two types we use and sell only brushless varieties including: Induction, PMAC, BLDC. All systems listed below are WEG (water-ethyl-glycol) cooled and require pumps with adequate pressure and flow-rate to produce power listed.
14
->Winding Options: Many of the systems listed below use motors which can be custom wound to provide tradeoffs between power, torque and rpm, so after you may a system selection, provide us with specific application needs so we can provide a winding option ans a performance simulation for that winding option.
15
16
Peak PowerPart number
(HT - high torque)
DescriptionLinked additional materialsLinked additional materialsLinked additional materialsLinked additional materialsLinked additional materials
17
LV - low -voltage
96-144Vdc Drive Subsystems
35kW / 47hpQWC/SEV-35kW peak-132Vdc-AF/M1302-SG4S4Kit contains: IP67 motor/controller (2 sizes offered), controller chill plate, contactor, low voltage wiring harness, 3 hours tech support.
Peak Power 47hp/35kW for 10 secs, Peak Torque ~ 40 ft-lbs / 54nm,
Continuous/Rated Power 20HP / 15kW, Cont. Torque 22 ft-lbs./ 30nm, motor torque constant ~.15/nm and Max RPM 5,700. Motor is 92% efficient at voltages between 24 to 132Vdc. This is a 4 pole motor (8 magnets) 28 turns per phase. Motor Weight ~35lbs Controller Weight w/ chill plate ~7lbs. Recommended 6 liters per minute (lpm) water cooling for motor. Dual used in 70-100kW Electronic Differential subsystem. Four of these systems were used in a AWD Torque Vectoring Electric UTV tech demonstrator (project conceived, design and built while QWC supported EVD)
Motor and Controller pictureOptional larger controller- inverter, see below QWC.SEV-55peak systemController - inverter data sheet (refer to size 4)Dual used in 70-100kW Electronic Differential subsystemVIDEO - Four of these systems used in this industry milestone technology demonstrator
18
50kW / 67hpQWC/SEV-50kW peak-96Vdc-AF/M1302-SG4S6Kit contains: IP67 motor/controller (2 sizes offered), controller chill plate, contactor, low voltage wiring harness, 3 hours tech support.
Peak Power ~67hp / 50kW for 10 secs, Peak Torque ~66ft-lbs / 89nm, Continuous/Rated Power ~25 hp / 19kW, Cont. Torque ~22 ft-lbs / 30nm, motor torque constant ~.15/nm and Max RPM 5,700, Motor Weight ~35lbs, Controller Weight w/ chill plate ~11lbs. Recommended 6 liters per minute (lpm) water cooling for motor.
Motor and Controller pictureSize 6 - larger controller-inverterController - inverter data sheet (refer to size 6)Dual used in 70-100kW Electronic Differential subsystemFour of these systems could have been used, IF more power was desired
19
55kW / 73hpQWC/SEV-55kW peak-100Vdc-RF/M1616-SG4S6This system is quite similar to what Zero Motorcycle uses, the differences are: motor in this package has more flux in the rotor and more magnet material, for a higher power in the same size package. See link comparing our rotor to Zero's. Both have the same stator winding, however our motor is liquid-cooled for higher cont. power, where Zero’s is air-cooled (NOTE: we also sell an air-cooled version with less cont. power capability.)
Kit contains: IP67 motor/controller (size 6), controller chill plate, contactor, low voltage wiring harness, 3 hours tech support.
Peak Power 73hp / 55kW for 10 secs, Peak Torque ~88ft-lbs / 120nm, ~67hp / 50kW for 120 secs,
Continuous/Rated Power ~27HP / 20kW, Cont. Torque ~32 ft-lbs./ 44nm, motor torque constant ~.2/nm and Max RPM 8,000*, Motor Weight ~48lbs, Controller Weight w/ chill plate ~11lbs. *Field Weakening required
Compare our rotor on left to Zero on rightMotor and Controller pictureSize 6 ControllerController- inverter data sheet (refer to size 6)
20
65kW / 88hpQWC/SEV-65kW peak-96-144Vdc-RF/ HP51-CuKit contains: Liquid-cooled motor/controller, controller chill plate, contactor, HV Relay, Precharge Resistor, Curtis 840 Dash Gauge, SPST Menu Button, SPST Mode Switch, low voltage complete wiring harness, 3 hours tech support.
Peak power ~88hp / ​65kW, Peak Torque ​~108 ft-lbs / 146nm peak,
Cont/Rated Power ~55hp / 41kw, Cont. Torque avg. 80 ft-lbs / 108nm,
Air-cooled Cont./Rated Power ~45hp / 33kW ​Cont. Torque ~43 ft-lbs / 58nm and Max RPM 8,000, Motor Weight 115 lbs (52kgs), Controller Weight w/ chill plate 13 Lbs (5.9 kgs). Air-cooled motor option also available.
Motor - Controller Kit PictureController data sheetPeak PerformanceLiquid-cooled Continuous PerformanceAir-cooled Continuous Performance
21
80kW / 107hpQWC/SEV-80kW peak-100Vdc-RF/ M1616-DSGS6Kit contains: IP67 motor/controller (size 6), controller chill plate, contactor, low voltage wiring harness, 3 hours tech support.
Peak Power ~107hp / 80kW Peak for 120 secs,
Cont. Power ~36kW , and Max RPM 8,000*, Motor Weight ~48lbs, Controller Weight w/ chill plate ~11lbs. *Field Weakening required
Motor- Controller Picture (dual controllers in this kit)Size 6 ControllerController- inverter data sheet (refer to size 6)
22
123kW / 165hpQWC-SEV-123kW peak-144V-RF/ DHP35LC-CuKit contains: liquid-cooled (ATF) dual core motor/dual controllers, controller chill plates, contactors, low voltage wiring harnesses, Curtis 840 Dash Gauges, 3 hours tech support. @144Vdc/500amps
Peak power ~165hp/123kW, Peak Torque ~188 ft-Lbs / 255 Nm,
Cont/Rated Power ~75hp / 56kw, Cont. Torque avg. ~120 ft-lbs. Air-cooled Cont./Rated Power ~67hp/50kW cont, Cont. Torque ~59ft-lbs /80nm, 8,000 Max RPM. Air-cooled motor option available.
Motor- Controller Kit PictureController data sheetPeak PerformanceLiquid-cooled Continuous PerformanceAir-cooled Continuous Performance
23
MV - medium voltage 300-400Vdc Drive Subsystems110kW / 147hpQWC/SEV-110kW peak-360Vdc-RF/AMR- Rem90p-R100kWKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc. 2 Motor windings available -
“P” winding - Peak Power 147hp/ 110kW 30secs, Peak Torque 144 ft-lbs/195 nm, Cont./Rated Power 107hp / 80kW, Rated Torque ~118 ft-lbs/ 160 nm and Max RPM 10,000.
“S” winding - Peak Power 107hp / 80kW, Peak Torque ~243 ft-lbs / 330nm, Cont. Power ~78hp / 58kW cont, Cont. Torque ~200 ft-lbs / 271 nm, 7,500 Max RPM
Motor and Controller -Inverter pictureController- Inverter data sheet (100dx size used for this system)Peak Performance CurvesParallel vs. Series Motor Wind Performance CurvesCompact motor/ controller unit option
24
130kW / 174hpQWC/SEV-130kW peak-360Vdc-RF/AMR- Rem90p-R150kWKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc. 2 Motor windings available - For “P” winding -
Peak Power ~174hp/ 130kW 10 secs, Peak Torque ~184 ft-lbs/250 nm, Cont. Power ~107hp / 80kW, Rated Torque ~125 ft-lbs/ 169 nm and Max RPM 10,000.
Motor and Controller- Inverter PictureController- Inverter data sheet (150dx size used for this system)Peak Performance Curves
25
142kw / 190hpQWC/SEV-142kW peak-350Vdc-RF/ Pk210-150-S6-R150kWKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc. For “S6” winding -
Peak Power ~190 hp/ 142 kW 10 secs, Peak Torque ~164 ft-lbs/222 nm,
Cont. Power ~121hp/ 90kw, Rated Torque ~72 ft-lbs/98 nm and Max RPM 9,000, Motor Weight 100 lbs / 45.4 kg, Controller Weight 26 lbs/ 11.8kg. Other windings available which trade more torque for less power.
Motor 3 view drawing link Controller- Inverter (150dx size used for this system)Controller- Inverter data sheet (150dx size used for this system)Peak/Cont. Performance CurvesMotor family picture
26
145kW / 194hpQWC/SEV-145kW peak-360Vdc-RF/Rem115p-R150kWKit contains: motor (Remy 1.6 or AMR case)/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~194hp / 145kW 10 secs, Peak Torque ~228 ft-lbs/310 nm (“145MV” red and blue curves only),
Continuous/Rated Power ~120hp / 90kW, Rated Torque ~140 ft-lbs/ 190 nm and Max RPM 10,000.
Motor and Inverter PictureController- Inverter data sheet (150dx size used for this system)Peak Performance Curves
27
220kW / 295hpQWC/SEV-220kW peak-400Vdc-
U220+ RFmotor
Kit contains: matched motor/controller, 5 hours tech support,
Peak Power ~295hp / 220kW Peak torque ~516ft-lbs 700 Nm,
Cont. Power ~201hp / 150 kW, ~Cont. Torque ~324ft-lbs / 440 Nm and Max RPM 6000.
Upgrade to 250kW peak system with same motor-controller dimensions but increased max input voltage range to a “HV” system 450-750Vdc and reduced RPM down to 5500.
Motor and Controller- Inverter PictureSystem DimensionsPerformance CurvesSystems we offer in this family
28
310-400 kW / 415-536 hp
475 kW/ 636 hp
QWC/SEV-310kW peak-400vdc-RF- Induction-Tesla-drive unit2 performance levels are available, however limited supply makes lead times unpredicitable - please contact us for more information.
Kit contains: all-liquid-cooled motor, inverter-controller and 9.73:1 single-speed gearbox. Most popular option is:
Peak Power ~415 hp / 310 kW, Peak Torque ~443ft-lbs / 600 nm, @ 1200Amps, Cont. Power ~hp / kW, Cont. torque ~ft-lbs. / nm, and Max RPM 16,000
These are the “performance” versions, secondary market units with optional Quaife LSD for superior traction control without requiring a Tesla-like electronic traction control system, best price-performance, but no warranty, and Tesla will not sell us brand new warrantied units, so NOT applicable for new OEM vehicles. Base model also may be available - Peak Power 362 hp / 270 kW and 325 ft⋅lb / 440 Nm Integration options with BMS, etc. available.
Motor- Controller- Gearbox pictureDrive Unit with Axles - Half-shaftsPerformance ~415-536 hp peak and ~443 ft-lb

Performance+ ~636 hp and ~480 ft-lb peak torque
29
HV - high voltage
400-800Vdc Drive Subsystems
145kW / 194hp - HTQWC/SEV-145kW peak-HT-750Vdc-AF/ Ph301-R150dz Kit contains: motor/controller (pm150dz), 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~194hp/ 145kW, Peak Torque ~310ft-lbs / 420nm,
Cont. Power ~174hp/130kw, Cont. Torque ~147ft-lbs/ 200nm, Max RPM 8,000. Sample application is a dual version of this motor/controller with our custom gearbox used for a RWD Electronic Differential application (see below for more information).
Controller- Inverter data sheet (150dz size used for this system)Motor dimensions and 4-view drawingPerformance CurvesSample application using two of these motors
30
155kW/ 208hpQWC/SEV-155kW peak-750Vdc-AF/ Ph271-R150dzrKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~208hp / 155kW 60secs, Peak Torque ~177ft-lbs/ 240nm, Cont. Power ~90kW / 121hp,. Cont. Torque ~103ft-lbs / 140nm, Max RPM 12,000 Motor dimensions and 3-view drawing
Controller- Inverter data sheet (150dzr size used for this system)Motor dimensions and 3-view drawingPerformance Curves
31
200kW / 268hpQWC/SEV-200kW peak-750Vdc-RF/AMR- Rem115p-R150dzKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc. 2 Motor windings available: “P” winding - Peak Power ~268hp/ 200kW 10secs, Peak Torque 155ft-lbs / 210nm, Cont. Power ~181hp / 135kw, Cont. Torque ~209ft-lbs / 283nm, Max RPM 10,000.
(Optional “S” winding - Peak Power ~221hp/ 165kW, Peak Torque ~310ft-lbs / 420nm, Cont. Power ~148hp / 111kw, Cont. Torque ~172ft-lbs / 233nm, Max RPM 10,000.)
Motor and 150kW Controller- Inverter picture Controller- Inverter data sheet (150dz size used for this system)Compare Parallel vs. Series Motor Winding Performance Curves
32
200kW / 268hp - HTQWC/SEV-200kW peak-HT-750Vdc-AF/ PH381-R150dzrKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~268hp/ 200kW 20secs, Peak Torque ~472ft-lbs / 640nm,
Cont. Power ~121hp / 90kw, Cont. Torque ~203ft-lbs / 275 nm, Max RPM 6,000
Controller- Inverter data sheet (150dzr size used for this system)Motor dimensions and 3-view drawingPerformance Curves
33
215kW / 288hp - HTQWC/SEV-215kW peak-HT-750Vdc-AF/ Ph301-R150dzr Kit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak power ~288hp/ 215kW 10 secs, Peak Torque ~445ft-lbs / 603nm,
Cont. Power ~188hp / 140kw, Cont. Torque ~164 ft-lbs. / 223nm, Max RPM 8,000. Pictures of a dual version of this motor/controller with our custom gearbox used for a RWD Electronic Differential application is linked to the right.
Controller- Inverter data sheet (150dzr size used for this system)Motor dimensions and 3-view drawingPerformance CurvesApplication example: dual version of this motor/ controller with custom gearbox
34
250kW / 335hp - HTQWC/SEV-250kW peak-HT-750Vdc- U250RFmotorKit contains: matched motor/controller, 5 hours tech support,
Peak Power ~335hp / 250kW Peak torque ~664ft-lbs 900 Nm,
Cont. Power ~201hp / 150 kW, ~Cont. Torque ~265ft-lbs / 360 Nm and Max RPM 5500.
Motor and Controller- Inverter PictureSystem DimensionsPerformance Curves
35
275kW/ 369hpQWC/SEV-275kW peak-750Vdc-RF/AMR- Rem115p-R250dzKit contains: motor/controller, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak power ~369hp/ 275kW 10secs, Peak Torque ~301 ft-lbs./408 nm,
Cont. Power ~241hp / 180kw, Cont. Torque ~162ft-lbs / 220nm and Max RPM 10,000
Motor and 250kW Controller- Inverter picture Controller- Inverter data sheet (250dz size used for this system)Performance Curves
36
300kW / 400hp - HTQWC/SEV-300kW peak-HT-750Vdc-AF/ PH382-dR150dzKit contains: motor/dual controllers (150dz), 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~400hp/300kW, Peak Torque ~892ft-lbs / 1210nm,
Cont. Power ~268hp/200kW, Cont. Torque ~368ft-lbs. / 500nm. Max RPM 6,000
Controller- Inverter data sheet (150dz size used for this system)Motor dimensions and 4-view drawingPerformance Curves
37
400kW / 536hpQWC/SEV-400kW peak-HT-750Vdc-RF/dAMR- Rem115p-dR150dzKit contains: matched motor/dual 150dz Inverter/controllers, many optional accessories, e.g. wire harnesses, soft-start kit, etc. (Performance is exactly 2x the single motor core QWC/SEV-200kW peak-750Vdc-RF/AMR-Rem115p-R150dz system listed above)
Peak Power ~536hp/~400kW, Peak Torque ~310ft-lbs./420nm,
Cont. Power ~362hp/270kW, Cont. Torque: ~418ft-lbs / 566nm. Max RPM 10,000. (Optional “S” winding - see above single motor core specs)
Motor and Controller pictureController- Inverter data sheet (150dz size used for this system)Performance 2x the single motor core QWC/SEV-200kW peak-750VdcMotor shown with shipping plates picture
38
550kW / 737hpQWC/SEV-550kW peak-750Vdc-RF/dAMR- Rem115p-dR250kW Kit contains: motor/dual 250dz-controllers, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc. (Performance is exactly 2x the single motor core QWC-SEV275kW peak system listed above).
Peak Power ~737hp / 550kW, Peak Torque ~602 ft-lbs./816 nm,
Cont. Power ~482hp / 360kw, Cont. Torque ~324ft-lbs / 440nm and Max RPM 10,000
Motor and Controller pictureController- Inverter data sheet (250dz size used for this system)Performance is 2x single motor core QWC-SEV275kW peak systemMotor shown with shipping plates pictureExample install in record-breaking e-vette e-vette overvu
39
700kW / 938hp - HTQWC/SEV-700kW peak-HT-750Vdc-AF/ PH382-dR250kWKit contains: motor/dual 250dz-controllers, 5 hours tech support, many optional accessories, e.g. wire harnesses, soft-start kit, etc.
Peak Power ~938hp/ 700kW @ 6,000 RPM, Peak Torque ~1032ft-lbs. / 1400nm (1,200 Arms required),
Cont. Power ~375hp / 280kw, Cont. Torque ~369ft-lbs. / 500nm and Max RPM 6,000 (Other performance curves available for lower voltages - please e-mail if interested)
Controller- Inverter data sheet (250dz size used for this system)Motor dimensions and 4-view drawingPerformance Curves
40
41
e-mail: info @ QuantumWorks.comphone/txt: +01-619-438-0018 Contact us details, pricing and lead-time on these systemsLink to this table ->http://bit.ly/QWC-SEV-systems
42
Loading...
Main menu