Aerodynamic heating and heat transfer phenomena at Mach numbers 3 to 4 /

Tactual discriminability of two knob shapes as a function of their size /

Spectral density study of tracking performance. Part 1, The effect of instructions /

Spectral density study of tracking performance. Part 2, The effects of input amplitude and practice /

Review of literature on the relative efficiency of the dominant and the nondominant eye /

Effect of different preadapting luminances on the resolution of visual detail during dark adaptation /

Eye fixations of aircraft pilots. VIII, Fixations during zero-reader approaches in a jet aircraft /

Tracking performance on combined compensatory and pursuit tasks /

Transfer of training in motor learning as a function of degree of first-task learning and inter-task similarity /

Legibility of type as a function of reflectance of background under low illumination /

Quantitative instrument reading as a fixed function of dial design, exposure time, preparatory fixation, and practice /

Effect of number of dials on qualitative reading of a multiple dial panel /

Annual report on research for use in ANC-17 bulletin "Plastics For Aircraft" /

Effects of brightness and color of illumination on performance of a complex perceptual-motor task : flying a Link Trainer /

Handbook of acoustic noise control. Volume 1, Physical acoustics /

Handbook of acoustic noise control. Volume 1, Supplement 1 / Physical acoustics.

Retention of transfer in motor learning after 24 hours and after 14 months as a function of degree of first-task learning and inter-task similarity /

Influence of surround on tracking performance. Part 1, Tracking on combined pursuit and compensatory one-dimensional tasks with and without a structural surround /

Luminance thresholds for the resolution of visual detail during dark adaptation following different durations of light adaptation /

Determination of width and luminance of a cathode-ray-tube trace /

Effect of duration of light adaptation on time required for detection of a target on a simulated PPI scope /

Luminance thresholds during dark adaptation following preadaptation to cathode ray tube displays /

Effects of two instrument lighting systems on dark adaptation /

Changes in blood flow, arterial pressure and cardiac rate associated with experimental concussion and electroconvulsive shock /

Visual performance as a function of the brightness of an immediately preceding visual task /

Investigation of various properties of nickel aluminide. Part III, Investigation of the intermetallic compounds of Aluminum /

Standard values in nutrition and metabolism : being the second part of a handbook of biological data /

Search area and target detectability on a PPI cathode-ray tube /

Interpretation of the development of a perceptual set in S - R terms /

Diffusion of iron, nickel and cobalt into hot-pressed titanium carbide /

Design factors in knobs and levers for making settings on scales and scopes : a summary report /

Intermittent stressing and heating tests of aircraft structural metals /

Some problems in the spectral analysis of human behavior records /

Study of verbal mediation as a factor in transfer of training /

Study of furnace atmospheres and induction heating in the firing of porcelain enamels /

Effect of ceramic coatings on the oxidation and the impact strength of various heat treated titanium specimens /

Influence of methodology on research on instrument displays /

Method for determining human engineering design requirements for training equipment /

Resistance to continued heating of powdered cover coats applied to enameling iron and ferritic alloy /

Study of the mechanism of visual acuity in the central retina /

Visual factors influencing the precision of adjustment of reticle patterns : the influence of luminance, test object orientation, and test object-luminance relationship on vernier adjustments /

Routine maneuvers under day and night conditions, using an experimental panel arrangement : the ninth of a series of reports on eye fixations of aircraft pilots /

Effects of a changed environmental context upon performance of a tracking task /

Tracking performance as a function of exponential delay between control and display /

Transfer of tracking performance as a function of a delay between the control and the display /

Factors affecting differences in apparent size between opposite halves of a visual meridian /

Plastic deformation of ceramic-oxide single crystals. Supplement 1 /

Masking of cathode ray tube displays by ambient illumination /

Heat transfer and frictional effects in laminar boundary layers : Part 5. The modified Lighthill Method for determining the rate of heat transfer /

Spatial stimulus-response correspondence : performance on a key-pressing task as a function of the degree of spatial stimulus-response correspondence /

High temperature antioxidants for synthetic base oils. Part 5, Evaluation of additives, synthesis of new compounds, and mechanism studies /

Influence of the sensory requirements of the distracting task; the first of a series of reports on auditory and visual message presentation under distracting task conditions /

Rationale, experimental methodology, and exploratory investigation, the first of a series of reports on experimental analysis of complex task performance /

Theoretical considerations and exploratory investigation of "set" as response restriction, the first of a series of reports on "set" as a determiner of perceptual responses /

Role of spatial cuing as a response-limiter for location responses, the second of a series of reports on "set" as a determiner of perceptual responses /

Factors of task complexity and previous practice on a patterned component, the second of a series of reports on experimental analysis of complex task performance /

Influence of specific stimulus cuing on location responses: the third of a series of reports on "set" as a determiner of perceptual responses /

Resistance of ceramic coatings to attack by fuming nitric acid /

Creep properties of metals under intermittent stressing and heating conditions. Part 2, Intermittent heating /

Polynuclear aromatic compounds for high temperature lubricants. Part 2 /