Anthem Maintenance Workbook

	A	B	C	D	E	F	I
1	Maintenance Item	INITIAL NEW COACH ITEMS	Every 3 Months or 5000 miles	Every 12 months or 15,000 miles	Every 24 months or 30,000 miles	YEAR 1 DATE LOG	YEAR 2 DATE LOG

2	Lube Chasis	X		X
3	Change engine oil and filter			X
4	Check all Belts and Tensioners - Retention Belts if Necessary initially at 3 months or 5,000 miles whichever comes first.	X	X
5	Check all Hoses and Clamps Including CAC System - initially at 3 months or 5,000 miles whichever comes first. After initial check repeat every 12 months or 15,000 miles whichever comes first.	X	X		X
6	Drain Gear Box for Engine Cooling Fan removing as much of the old fluid as possible. Clean magnetic pipe plug in the bottom of the reducer at each oil change. Note:Refill with 24 oz. of SHC 75W90 Synthetic Oil.			X
7	Lubricate Drive Shaft - grease - NLGI #2 or Equiv. when motorhome is in use. Note:If motorhome is stored, lube driveshaft annually.		X
8	Lubricate Engine Cooling Fan Drive Shaft (K2 & K3 units with mechanically driven engine cooling fan) - Grease - NLGI #2 or Equiv. when motorhome is in use.		X
9	Replace Spin-On (external) Hydraulic Filter Element and Refill Reservoir (units with hydrostatically drive engine cooling fan) - Reference Reservoir Label and Filter Numbers			X
10	Check Engine Coolant - Test/adjust as Necessary. Refer to Chart Below	X		X
11	Clean Radiator and CAC from Debris X			X
12	Clean Chassis Batteries and Connections X			X
13	Check and Adjust Front and Rear Suspension Ride Height; Perform Overall Inspection Reference Suspension Manufacturer's Manual.			X
14	Lubricate Steering Linkages and Shaft - Grease - NLGI #2 or Equiv.	X		X
15	Lubricate Brake Camshafts and Slack Adjusters (if equipped) - Grease - NLGI #2 or Equiv.	X		X
16	Replace Fuel Filter (Secondary-pressure side) Cummins® Reference Engine Manufacturer's Manual			X
17	Replace Air Dryer Filter X				X
18	Drain Hydraulic Reservoir, Replace the Internal Filter Element, and Refill Reservoir Reference Reservoir Label and Filter Numbers (Units With Hydrostatically Drive Engine Cooling Fan)				X
19	Drain Power Steering Reservoir, Replace the Internal Filter Element, and Refill Reservoir - Reference Reservoir Label and Filter Numbers (Units Without Hydrostatically Drive Engine Cooling Fan)				X
20	Calibrate On-Board Weighing System (OBWS) (If Equipped). Refer to manufacturer’s calibration and operations manual.			X
21	Air filter element MUSTbe replaced when the restrictor indicator shows restriction, or annually, whichever occurs first.			X
22	Replace Hub oil bath			X
23	Replace differential oil			X
24	Check slide motor bolts		X
25	Clean air conditioner filters		X
26	Inspect IFS Wheel end Oil level every 1,000 miles
27	Inspect Rear Axel Oil level every 1,000 miles
28	NOTES:
29	For More Comprehensive Engine Maintenance and Intervals, Go to the Engine Section of Manual and Reference the Maintenance & Operations Sheet and Engine Manual. NOTE: The Maintenance & Operations Sheet takes Precedence over the Manufacturer's Manual
30	For More Comprehensive Transmission Maintenance and Intervals, Refer to the Applicable Manual in the Manual Binder
31	For More Comprehensive Axle Maintenance and Intervals, Refer to the Applicable Manual in the Manual Binder
32	For More Comprehensive Suspension Maintenance and Intervals, Refer to the Applicable Manual in the Manual Binder
33	Spartan Customer & Product Support Group at 1-800-543-4277.
34
35	RESOURCES:
36	Motorhome Operations and Maintenance Manual Final Release 7-1-15.pdf
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100