batteryACID v1.0_BOM

	B	C	D	E
1	hexinverter.net batteryACID v1.0 Bill of Materials
2	Part	Qty	Designators	Note/s
3
4	Included in the kits (you must find your own pots and jacks as these are format specific)
5
6	TL071 Dual Operational Amplifier	1	IC1
7	LM741 is a possible substitute
8
9	8 pin DIP IC Socket	1	IC1
10
11	10pF Ceramic Capacitor	1	C8	5mm lead spacing
12	1nF Capacitor	2	C4, C6	5mm lead spacing
13	10nF Capacitor	1	C3	5mm lead spacing
14	47nF Capacitor	1	C5	5mm lead spacing
15	10uF Electrolytic Capacitor	1	C7	2.54mm lead spacing
16	1uF Electrolytic Capacitor	2	C1, C2	2.54mm lead spacing
17	Note: All capacitors should be 25V rating or greater
18
19	1N270 Germanium Diode	2	D1, D2	These are the distortion waveshaping diodes. Experiment with alternative diodes for different tones! Don't sweat it if you cannot find the 1N270. 1N4148 work excellent!
20	Alternatives: 1N4148, 1N914, BAT85 or pretty much anything else
21
22	4.7k Resistor	1	R6
23	10k Resistor	2	R5, R7
24	1M Resistor	5	R1, R2, R3, R4, R8
25
26	SPDT ON-ON toggle switch	1	SW	This is the bypass/enable switch for the effect
27
28	Not included in the kits (due to format/build specifics):
29
30	1M audio potentiometer (panel mount)	1	Distortion
31	10k audio potentiometer (panel mount)	1	Output Level
32	100k audio potentiometer (panel mount)	1	Input Level
33	Jacks (to match your format)	2	Input, Output	1/4", banana, 3.5mm, etc.!
34	Knobs	3	Controls
35	Wire	xx	xx	26AWG or so is recommended
36	3mm machine screw, nuts + PCB standoffs	2	xx	For fixing the PCB to the panel/l-bracket
37	Power Header (Eurorack or MTA-156)	1	xx
38	Eurorack panel	1	xx	http://www.resynthesis.co.uk
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96