Jupiter Storm v1.1 BoM

	B	C	D	E
1	hexinverter.net Jupiter Storm v1.1 Bill of Materials
2	Part	Qty	Designators	Note/s
3
4	Necessary Stuff:
5
6	TL072 Operational Amplifier	3	IC1, IC3, IC5
7	TL074 Operational Amplifier	1	IC9
8	CD4046 PLL	3	IC2, IC4, IC6	MUST be Texas Instruments brand.
9	CD4040 Divider	1	IC8	MUST be Texas Instruments brand.
10	CD4070 XOR Gate	1	IC7	MUST be Texas Instruments brand.
11	CD40106 Hex Inverter	1	IC10
12	NOTE: The use of IC sockets is highly recommended for all integrated circuits
13
14	2N3904 NPN Transistor	6	Q1, Q2, Q3, Q4, Q5, Q6	Match in pairs if you want, but, it's really not necessary if you ask me (it is noise afterall)!
15
16	100pF Capacitor	3	C2, C4, C13	5mm lead spacing
17	10nF Capacitor	3	C1, C3, C12	5mm lead spacing
18	.1uF Capacitor	6	C17, C18, C19, C20, C24, C25	5mm lead spacing
19	1uF Electrolytic Capacitor	7	C7, C8, C9, C10, C11, C14, C15	2.5mm lead spacing, 5mm diameter
20	220uF Electrolytic Capacitor	2	C5, C6	2.5mm lead spacing, 6.3mm diameter
21	Note: All capacitors should be 16V rating or greater
22
23	1k Resistor	9	R2, R7, R12, R16, R20, R21, R22, R23, R27
24	2k Resistor (or tempco)	3	RT1, RT2, RT3	You may or may not want temperature compensation via 3500ppm tempcos. Some might appreciate some drift for evolving patches!
25	4.7k Resistor	1	R28
26	12k Resistor	3	R1, R3, R9
27	47k Resistor	6	R6, R11, R15, R24, R25, R26
28	100k Resistor	3	R5, R10, R14
29	1M Resistor	3	R4, R8, R13
30
31	SPDT ON-ON toggle switch	2	SW.FBK, SW.OSC3	NOTE: if using 14HP eurorack panel I offer, you MUST use Smallbear OR Mouser part number: 10TC410 -- OR, you can drill out the two holes a bit larger to accommodate standard mini toggle switches with a 6.35mm shaft size
32
33	[OPTIONAL] 2x5 .1" male header	1	XPAND	Expansion port header. This part is optional. It will be used for a future expansion module.
34
35	Format Specific Stuff:
36
37	100kB LINEAR taper potentiometer	3	F1, F2, F3	Oscillator frequency controls. You could use pretty much any value from 10k-500k here if you don't have 100k handy.
38	Jacks (to match your format)	11	I/O Jacks	1/4", banana, 3.5mm, etc.!
39	Knobs	3	F1, F2, F3
40	Wire	xx	xx	26AWG or so is recommended
41	3mm machine screw, nuts + PCB standoffs	4	xx	For fixing the PCB to the panel/l-bracket
42	Power Header (Eurorack or MTA-156)	1	xx
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100