ABCDEFGHIJKLMNOPQRST
1
IC 1 Time Log
2
3
DateHoursMinutesAccomplishedTotal Time
4
10/27/20128Today was all prep work, I just got the car I will be working with, I did an in depth clean and wash of the entire car this includes removing as many panels as possible from the car. I inspected its current electrical system and audio wiring(audio wiring was done incorrectl, radio not in place correctly stripped it of current incorrect wiring and left radio as is). 8 Hours
5
11/12/2012719Today I began construction on the MDF frames, I created the bases and one side of the audio equipment frame.15 Hours 19 Minutes
6
11/22/2012615Today I made two sides to the sub box frame and drew out the sub woofer MDF rings. I also installed the radio how it should have been.21 Hours 34 Minutes
7
11/24/20124Today I went shopping for necessary materials to continue frame construction, i bought 1x2 wood strips, fiberglass resin, fiberglass mat, fiberglass hardener, jigsaw and blades, air sander with adapter and twist lock sandpaper, paint brushes and fleece.25 Hours 34 Minutes
8
11/24/20127Today I finished the wood frame for the sub enclosure, i spent the day making speaker circles and proping them up with wood into the desired shape.32 Hours 34 Minutes
9
12/1/2012320Today I added air ports to the frame design and covered the frame with red fleece that I purchased today. I chose a bright color so I would be able to distinguish areas that I lay resin on.35 Hours 54 Minutes
10
12/2/20122Today I added the first layer of resin to the fleece and left it to dry.36 Hours 54 Minutes
11
12/6/2012115Today I added a second layer of resin to the sub enclosure.38 Hours 9 Minutes
12
12/8/2012430Today I sanded the enclosure and added a layer of resin but with fiberglass mat for the first time.42 Hours 39 Minutes
13
12/11/20121Today I sanded the sub enclosure43 Hours 39 Minutes
14
12/15/2012145Today I added a second layer of resin with mat.45 Hours 24 Minutes
15
12/17/2012120Today I sanded the sub enclose and added a third layer of resin and mat.46 Hours 44 Minutes
16
12/27/20121Today I sanded the enclosure and added a fourth layer of mat and resin.47 Hours 44 Minues
17
12/30/20121Today I sanded the sub enclosure and added a fifth layer of mat and resin.48 Hours 44 Minutes
18
1/5/201330Today I sanded the enclosure.49 Hours 14 Minutes
19
1/12/20133Today I completed the amp rack all it needs now is to be covered in speaker cloth.52 Hours 14 Minutes
20
1/21/20132Today I mixed bondo and resin and applied it to the enclosure.54 Hours 14 Minutes
21
1/23/20133Today I sanded the enclosure and added the final layer of pure bondo.57 Hours 14 Minutes
22
1/29/20136Today I detail sanded the encosure and primered it white63 Hours 14 Minutes
23
1/30/2013320Today I completed the amp rack by covering it with speaker coth, it was more time consuming than expected, I also ran RCA wires and a remote and power wire from head unit to the back. I installed the equalizer under the head unit.66 Hours 34
24
1/31/2013415Today I finally connected everything, I connected 2 amplifiers and an epicenter with a fan to keep electronics as cool as possible and I replaced the front door panel speakers.70 Hours 49 Minutes
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100