1 of 7

Day 1 Curriculum

​

  • 30 min - OSE Introduction
    • See OS Microfactory STEAM Camp presentation
  • 20 min - Introductions - and USA Team shows up at the Intros of the Europe Team
    • FB next time? Chris?
    • WebX backup
  • 20 min - discussion of outcomes - overview of Collaboritive Literacy
    • Marcin prepares
  • 1 hr - kit unpacking and explanation
    • YES! Very interesting generative part set
    • Start charging batteries
  • 6 hrs - 3D printer Build - 3 hours for axis; 1 hour for control panel; 1 hour for putting all together

​

    • 3D Printer Build Manual
    • Do first sample print
    • SD Card has tool pritn files, D3D Pro, and CNC Torch Table.
  • 1 hr - Raspberry Pi Tablet Introduction - Project Direction
    • 3D Printed case
    • Battery integration
      • Battery Power Takeoff
    • Modular Tripod Design - we work together!
    • Modular Light Design - plugs into the laptop for battery
    • Modular Slider Design
    • Software integration - camera app, operating system
    • Phone app?

2 of 7

Time Checks for Build

​

  • Detailed schedule so we coordinate time
    • Swarming: first person done helps everyone else
  • Everyone remains on a well-defined schedule
  • Break it down by hour, and even 15 minutes

​

0:00 - Build Axes

​

1:00 - Build Controller

​

2:00 - Build Extruder

​

3:00 - Build Bed

​

4:00 - Mount Everything and Connect

​

5:00 - Run!

3 of 7

Tools

​

5 mm hex key is main tool

2 mm hex key

1.5 mm hex key

Philips screwdriver

Small Philips screwdriver

2.5 mm hex key

2 mm hex key

Small flathead screwdriver

4 of 7

Base

​

5 of 7

Universal Controller - USA and Europe Modification

​

Note the Modification Requirement for Europe:

The version shown here is the USA control panel. The GFCI form factor for Europe is larger, and does not fit in this Universal Controller space allowed in the USA version. Thus, a European power cord, GFCI outlet, Plug, and USB power supply to feed 5V into the arduino all must be adapted to the European version.

​

M6x18 screws

M6x30 screws

M6x18 screws

SSR

24V Power Supply

GFCI

RAMPS +

Arduino

Voltage Converter

Plug

6 of 7

Universal Controller Diagram

​

5 V Power Supply - regular USB power supply plugs into the GFCI. Power Supply is not shown on last page. Blue USB A to B cord feeds power from USB to Arduino

​

Power plug feeds 120V to the 24V power supply

​

M6x18 screws

7 of 7

Day 1 Run! First print

​

Goals:

  • Understand Marlin Basics
    • Code structure
    • Where to find Gcode commands
    • The OSE Hack of the control panel from 12/12 to 5/24 vdc input
  • Opening Arduino Environment
    • Configure it to upload
    • Upload Marlin exercise
  • Lulzbot Cura interface basics on OSE Linux
  • FreeCAD First Intro
    • Follow Tutorial 1, 2, and Workflow Exercise

​