Assistive Utensil
Breanna Van Meter, Kiana De Jesus, Olivia Zamora, Samantha Siqueiros
Mentor: Dr. De Gregorio
Project Justification
Patients with neurodegenerative diseases struggle to independently accomplish daily tasks such as eating. The assistive utensil mitigates the effects of Parkinson’s Disease related hand tremors through a stabilizing utensil handle, as it counteracts the movement of tremors using an electromechanical system.
Dishwasher Safe Utensil Attachments
ISO 15883-5:2021
Withstand water temperature of 55 C, 30 grams of detergent, & 80 minute wash cycle
Low Cost
Purchase cost: Less than $150
Manufacturing cost: $30
Biocompatible & Non-Toxic Material
ISO 10993-1
Stainless steel, Air-Carbon Plastic, & ABS Filament materials
Lightweight
Weigh less than 55 grams
Stabilization of Tremors
Stabilize hand tremors by 70%
Mechanical Durability
IEC 60601-1
Withstand 6 ft. drop
Electrical Durability
IEC 60529
Achieve Level 6 IP Rating (No dust ingress)
Long Battery Life
IEC 60601-1-11 Edition 2.1 2020-07
Minimum 3 hour operating battery life
Low Profile
Total length: 8 inches
Water Exposure
IEC 60529
Achieve Level 4 IP Rating
Limited Holes & Seams
ASTM F3357-19
5 Holes & 1/2mm Seam
Functional Requirement | Test Result |
Dishwasher Safe Utensil Attachments | Pass |
Low Cost | Pass |
Long Battery Life | Pass |
Stabilization of Tremors | Fail |
Mechanical Durability | Fail |
Electrical Durability | Pass |
Water Exposure | Pass |
Limited Holes and Seams | Pass |
Lightweight | Fail |
Low Profile | Fail |
Biocompatibility | N/A |
Project Description
The assistive utensil is designed with an ergonomic, 3D printed ABS plastic handle that considers various gripping methods including power, thumb, continental and pinch grip. The handle includes a front component for dishwasher safe utensils to be attached and a back component which houses the electromechanical system. The front component is dynamic and is moved with respect to pitch and roll which are the two most common orientations for hand tremor movement. The front component includes a clamp mechanism which secures and releases the aircarbon utensil attachment with the push of a button. The back component houses the electromechanical system which includes a 5V (1A) battery, 2 servo motors, an Arduino Nano, an MPU 6050, and a switch all connected within a custom printed circuit board. Arduino code identifies the position of the servo motors and records the acceleration and angle from the MPU6050. The Arduino sends these MPU6050 variables to the servo motors to move accordingly. When the utensil handle is moved due to a tremor, the Arduino sends a signal to the motors to move in a direction to counteract the unwanted movement from the tremor.
Functional Requirements, Engineering Standards
& Design Specifications
55.6% tremor correction
39.7% tremor correction