1 of 13

Final Year Project Proposal Defense Presentation

Department of Electrical Engineering, FET, International Islamic University Islamabad

“Project Title Here…”

2 of 13

Presented By:

Department of Electrical Engineering, FET, International Islamic University Islamabad

  • Group member name AAA-FET/BSEE/FXX
  • Group member name BBB-FET/BSEE/FXX
  • Group member name CCC-FET/BSEE/FXX

​

Supervisor Name, Designation

Supervised By:

Co-supervised By (if any):

Co-supervisor Name, Designation

3 of 13

Presentation Flow

  • Introduction
  • Problem Statement
  • Project objective
  • Design Methodology
  • Block Diagram
  • Hardware Modules
  • Application Areas
  • Time and cost Analysis
  • References

Department of Electrical Engineering, FET, International Islamic University Islamabad

4 of 13

Introduction

  • Briefly introduce you project here…
  • Introduction to project, its background and then literature review

Department of Electrical Engineering, FET, International Islamic University Islamabad

5 of 13

Problem Statement

  • Define the problem here in the light of literature review…

Department of Electrical Engineering, FET, International Islamic University Islamabad

6 of 13

Objectives

  • Define the project objectives you want to achieve at the end of your FYP…
  • Objectives should be realistic, achievable and well-defined.

​

Department of Electrical Engineering, FET, International Islamic University Islamabad

7 of 13

Design Methodology

  • Give your design methodology here, which you will probably adopt to solve your complex engineering problem taken as your FYP.
  • Design methodology may be supported by figures, diagrams and/or flow charts.

Department of Electrical Engineering, FET, International Islamic University Islamabad

8 of 13

Block Diagram

  • A brief block diagram of overall project and its integrated module must be given here…

Department of Electrical Engineering, FET, International Islamic University Islamabad

9 of 13

Hardware Modules

  • Hardware modules expected to be used in the project should be explained here.

Department of Electrical Engineering, FET, International Islamic University Islamabad

10 of 13

Application Areas

  • Target application areas should be mentioned here.

Department of Electrical Engineering, FET, International Islamic University Islamabad

11 of 13

Time and cost Analysis

  • A Gantt chart must be given to define the project timelines with all the milestones on a grid of One week Minimum.
  • Expected cost of project should also be available.

Department of Electrical Engineering, FET, International Islamic University Islamabad

12 of 13

References

  • All the data quoted in the presentation should be referenced and the references should be given here. Use IEEE style for referencing and citation.
  • Example of journal paper:
    • Yavuz, Seda, A. Celebi, M. Aslam and O. Urhan, "Selective gray-coded bit-plane based low-complexity motion estimation and its hardware architecture", IEEE Transactions on Consumer Electronics, vol. 62, no. 1, pp.76-84, 2016.
  • Example of Conference paper:
    • R. Takada, S. Orihashi, Y. Matsuo, J. Katto, "Improvement of 8K UHDTV picture quality for H.265/HEVC by global zoom estimation", IEEE International Conference on Consumer Electronics, pp. 58-59, Jan. 2015.
  • Online Content Reference:
    • CIF format Videos, “YUV test video sequences”, available on-line at: http://media.xiph.org/video/derf/, Jan-2016.

Department of Electrical Engineering, FET, International Islamic University Islamabad

13 of 13

Thank You…

Questions???

Department of Electrical Engineering, FET, International Islamic University Islamabad