Results
Poster Title
Introduction
References
Method
[1] G. Lippmann, “Épreuves réversibles donnant la sensation du relief,” Journal de Physique Théorique et Appliquée, vol. 7, no. 1, pp. 821–825, 1908.
[2] X. Xiao, B. Javidi, M. Martinez-Corral, and A. Stern, “Advances in three-dimensional integral imaging: Sensing, display, and applications [invited],” Applied Optics, vol. 52, no. 4, p. 546, 2013.
[3] N. Sugano, H. Kato, and K. Tachibana, “The effects of shadow representation of virtual objects in augmented reality,” The Second IEEE and ACM International Symposium on Mixed and Augmented Reality, 2003. Proceedings.
Discussion & Conclusions
To provide binocular parallax, we used an integral imaging method. Integral imaging uses the property that lenses transfer spatial coordinates to angular frequencies. …….
Implementation
Pixels
3D Image
Display panel
Lens array
Spotted
Wavefront
of external light
Sensor
Lens array
Figure 1. Principle of our proposed method. Left: Diagram of integral imaging. Right: Diagram of measuring external light source.
행사명 표시 부분(크기 변경 불가)
연구실 or 학교 로고 (선택사항)
포스터 작성부분
포스터 예시
1. 슬라이드 크기는 변경하지 마세요.
너비: 40cm
높이: 90cm
※ 위 사이즈는 실제 출력물의 ½ 크기입니다.
2. PPT 파일을 저장할 때 파일> 옵션> 저장에서
“파일의 글꼴포함”을 반드시 체크하세요.
※ 폰트 저장 오류가 생길 경우
바꾸기>글꼴바꾸기 에서 글꼴을
반드시 변경해야 합니다.
3. 원할 경우 연구실 로고를 넣으세요.
※ 막대바 색상이나 글자 크기 등은 원하는대로
변경해도 됩니다.
4. 수식은 문자가 깨지지 않는지 꼭 체크하고
확신이 들지 않으면 수식을 그림으로 변환하여
저장하세요.
5. 이 설명글은 삭제하고
PPT 또는 PPTX 포맷으로 파일을 제출하세요.
Author1, Author2, and Corresponding Author *
School of Electronic and Electrical Engineering, Hankook University
연구실
로고
2025
대한전자공학회
대구경북지부
AI·반도체·ICT 학술대회