1 of 50

SMTT��Special�Model�Transport�Trailer 

Velocity Projects 2025

2 of 50

BEFORE YOU START!

Velocity Projects 2025

Before building, join our Discord to get live help from us and our community. ��Don't build alone.

3 of 50

SMTT TECHNICAL SPEC

Velocity Projects 2025

  • Dimensions 959mm length (without hook), 339mm width, 359mm height
  • Empty weight about 7kg
  • It was designed for the FV01, and our future models. �However, thanks to the modular floor, you are able to carry models inside it in scales smaller than our F1 cars. This also allows you to manage the use of the space inside yourself.
  • The front axle is steerable for better maneuverability. Each wheel has its own shock absorber.
  • At the rear, underneath the floor there is a storage compartment for 4 tires.
  • In the middle, under the floor, there is 5 storage compartments for spare parts. �You can even stow an FV01 complete front wing and nose assembly into the largest one.
  • It can be pulled by models such as Casadio's Bronco, 3Dsets Landy 4x4 and etc...�They only require a dedicated hook to be printed and mounted.

​

4 of 50

How to print special SMTT tires?

Velocity Projects 2025

The SMTT requires special hard-filled printed tires due to its weight.��To do this, first print TIRE_INFILL according to the printing instructions. Then, when slicing the TIRE print with a layer height of 0.16 mm, add apause the print on layer 170 (27.24 mm high). Then insert TIRE_INFILL inside. �It is very important not to move the build plate while doing this! ��After inserting the infill, you can continue printing.

​

​

5 of 50

1.1��Floor assembly 

Velocity Projects 2025

1. Insert the M3 nuts into the holes on this side of the floor, in each piece of the floor (a total of 48 nuts).

6 of 50

1.2��Floor assembly 

Velocity Projects 2025

1. Screw M3x40 into the holes.�

7 of 50

1.3��Floor assembly 

Velocity Projects 2025

1. Screw M3x30 into the holes.�Screw two pieces of floor from one row, then only proceed to the next row. It is best to screw everything together on a flat surface. �(A total of 48 screws).��The floor pieces are marked with the row number and the position Left Right (looking at them from the top, as they will be mounted).

2. Screw M3x20 into the holes in shaft plate (10 screws).

8 of 50

1.4��Floor assembly 

Velocity Projects 2025

1. Screw M3x20 into the holes on both sides of tire storage.

9 of 50

1.5��Floor assembly 

Velocity Projects 2025

1. Screw M3x20 into the holes on both sides of next tire storage part.

10 of 50

1.6��Floor assembly 

Velocity Projects 2025

1. Push in M3 nuts in both rear axle mounts.

11 of 50

1.7��Floor assembly 

Velocity Projects 2025

1. Screw M3x20 into the holes on both rear axle mounts.

12 of 50

2.1��Top assembly 

Velocity Projects 2025

1. Screw M3x30 into the holes on both sides to secure front pillars.

13 of 50

2.2��Top assembly 

Velocity Projects 2025

1. Screw four M3x30 into the holes of each middle pillars.

14 of 50

2.3��Top assembly 

Velocity Projects 2025

1. Screw M3x30 into the holes on both sides to secure rear pillars.

15 of 50

2.4��Top assembly 

Velocity Projects 2025

1. Screw M3x10 into the holes.�Screw two pieces of roof from one row, then only proceed to the next row. It is best to screw everything together on a flat surface. �(A total of 48 screws).

16 of 50

2.5��Top assembly 

Velocity Projects 2025

1. Screw M3x30 into the holes on both sides to secure assembled roof to front pillars.

17 of 50

2.6��Top assembly 

Velocity Projects 2025

1. Screw M3x30 into the holes on both sides to secure assembled roof to rear pillars.

18 of 50

2.7��Top assembly 

Velocity Projects 2025

1. Screw four M3x30 into the holes of each middle pillars to secure assembled roof.

19 of 50

3.1��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 into the all holes of both biggest storage parts.��(A total of 32 screws).

​

20 of 50

3.2��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 countersunk into the holes of both smaller storage parts.�

2. Screw M3x20 countersunk into the outside holes of both smaller storage parts.�

21 of 50

3.3��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 countersunk into the all holes of both small storage floor parts.��

22 of 50

3.4��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 countersunk into the all holes of both big storage floor parts.��

23 of 50

3.5��Undercarriage assembly 

Velocity Projects 2025

1. Apply some CA glue to the joint area, then press the fitting into it.�Do the same for door of the other side.

24 of 50

3.6��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 into door arms on both sides.�

25 of 50

3.7��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x10 into door locks on both sides, so that the door does not open doing the next steps.�

26 of 50

3.8��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x40 screw and secure it with M3 nylock nut.�(hold it with pliers)

2. Push in M3 nut.

3. Screw in M3x40 screw from behind two shock absorbers.

27 of 50

3.9��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x40 to secure two shock absorbers on both sides of tire storage.�

2. Perform this and the previous step, on both sides.

28 of 50

3.10��Undercarriage assembly 

Velocity Projects 2025

1. Screw M3x20 into tire storage door arms on both sides.�

2. Screw M3x10 into door locks, so the door does not open doing the next steps.�

29 of 50

3.11��Undercarriage assembly 

Velocity Projects 2025

2. Screw in M3x40 countersunk.�

1. Push in M3 nut.

30 of 50

3.12��Undercarriage assembly 

Velocity Projects 2025

1. Push in bearing.

2. Push the shaft into the front axle .

3. Push in bearing.

31 of 50

3.13��Undercarriage assembly 

Velocity Projects 2025

1. Push in M3 nut.

2. Screw in M3x50 screw from behind two shock absorbers.

32 of 50

3.14��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x30.�

33 of 50

3.15��Undercarriage assembly 

Velocity Projects 2025

2. Screw four M3x20 to secure rim parts together.�

3. Perform this step for each wheel!

1. Push in both parts of rim.

34 of 50

3.16��Undercarriage assembly 

Velocity Projects 2025

4. Push in bearing.

1. Push in M3 nut.

2. Screw M3x30 to secure shock absorber to whishbone axle.

3. Screw M3x20 to secure shock absorber to pivot axle.

35 of 50

3.17��Undercarriage assembly 

Velocity Projects 2025

2. Screw M3x20 to secure the wheel cover to axle.

3. Perform this step for each wheel!

1. Push in bearing.

36 of 50

3.18��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x10 countersunk.�

37 of 50

3.19��Undercarriage assembly 

Velocity Projects 2025

1. Screw in four M3x50 to secure whole front axle assembly.�

38 of 50

3.20��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x20 to secure front skirt on both sides.

39 of 50

3.21��Undercarriage assembly 

Velocity Projects 2025

1. Mount four rear wheels��Click here for a reminder of how to assemble.

40 of 50

4.1��Walls and doors 

Velocity Projects 2025

1. Screw in M3x40 countersunk to secure rear door on both sides.

41 of 50

4.2��Walls and doors 

Velocity Projects 2025

1. Screw in M3x40 countersunk to secure rear door on both sides.

42 of 50

3.22 ��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x20 to secure rear skirt on both sides.

(yes, this is the correct sequence)

43 of 50

3.23��Undercarriage assembly 

Velocity Projects 2025

1. Screw in M3x20 to secure side skirts on both sides.

44 of 50

4.3��Walls and doors 

Velocity Projects 2025

2. Screw in M3x10 to assemble the front wall parts into a single wall.

1. Push in M3 nut.

45 of 50

4.4��Walls and doors 

Velocity Projects 2025

1. Slide in walls.��Each of the walls can be pulled out or put on by sliding them into the guides found in the pillars. ��They may have a lot of resistance during the first insertions. It is best to apply force as close to the guides as possible.

46 of 50

5.1��Accessories

Velocity Projects 2025

You might be wondering what the hole system in the floor is for. �It is used to attach any accessories.�

The default ones are wheel and the front wing locks.�

However, thanks to the regular arrangement of holes, you can design your own accessories! Each hole is 10x10mm and is 10mm away from the next one.

47 of 50

5.1��Accessories

Velocity Projects 2025

You might be wondering what the hole system in the floor is for. �It is used to attach any accessories.�

The default ones are wheel and the front wing locks.�

However, thanks to the regular arrangement of holes, you can design your own accessories! Each hole is 10x10mm and is 10mm away from the next one.

48 of 50

5.2��Hooks

Velocity Projects 2025

For details, please ask on Discord for now. :)

49 of 50

Congrats, You’ve completed Your Special Model �Transport Trailer!

Velocity Projects 2025

50 of 50

SMTT��Your transportation of fast things! 

Velocity Projects 2025