1
Parts List and Starter Builds
Instructions V_011
2
Sections
For additional information and help, please see the Frequently Asked Questions document.
3
Overview
4
Our story
The product got its start as a 3D printable screw-together dice tower. It soon became clear that Modi Boxi could be so much more. The 3D print screws were replaced with the Modi Bolt system, and Modi Boxi was born as a 3D printable storage solution for gamers.
5
Our design philosophy
Modi Boxi is based on three rules:
Design a gaming storage system that makes you want to play with it as much as the items you put in it.
6
Modi Boxi Math
When assembling Modi Boxi, remember these key rules:
7
Recommended Print Settings
8
Instructions
9
Boxi Sizes
Modi Boxi comes in three sizes: Small, Medium, and Large. In order to print them on your printer, your print bed should be 10mm larger than the Boxi size you want to print.
We offer a Composite Large Boxi so that smaller printers can print a large size Boxi by printing it in four small pieces and assembling it into the larger size.
10
Print Times and PLA Filament Usage
Modi Boxi print times and filament needs will vary due to nozzle flow rates and printer speeds. ��Most Modi Boxi tests were done with a Bambu P1P and the time and filament usage is listed here as a benchmark.
11
How items fit into a Boxi: Heights
Tray Heights
Layer 1 Layer 2 1.5 Layer Tray 2 Layer Trays 3 Layer Trays 4 Layer Trays 5 Layer Trays
12
How items fit into a Boxi: Widths
Small
Large
Medium 3 widths
One size
Width 1
Width 1 & 2
Width 3
1
Width 1
Width 1 & 2
Width 3
1
1
1
2
3
1
1
1
1
2
3
Card
holder
Card
holder
Card holders only
13
How to use the Modi Bolt system (patent pending)
Step 1
Align the hole in the arm with a hole in a Boxi.
Step 2
Step 3
Twist the Modi Bolt until it stops.
Step 4
Push in the Modi Lock until it is flush.
Modi Boxi
Modi Bolt
Modi Lock
Arm
NOTE: Everytime a Modi Bolt is listed in a build, it assumes it is built with the lock. Locks are provided as separate files incase the bolts are broken. Always assume you print a bolt and a lock when a bolt is listed.
14
How do the Modi Holes work?
01
02
03
04
05
01
02
03
Holes 01, and 05
Holes 02, and 04
Hole 03
Holes 01 and 03
Holes 02
The Modi Holes are designed to work with the Modi Bolt. This is how you attach things to the Modi Boxis. Each Hole is placed to maximize its utility with the Modi Boxi system.
About Modi Holes
Holes and what you can attach to each
Small Boxi
Medium Boxi
Large Boxi
15
How to use the Modi Arms
Each Boxi width and height has its own set of arms to connect to the Boxi below it. For example, there are medium Boxi arms for level 01, 02, 03.
Stack arms: To stack your Boxis, you need 4 arms for your top Boxi size and level. For example, if your top Boxi is a medium level 02, you will use 4 of stack arm M_02.
About the arms
Types of arms
Flat arms: To make the Boxi lay flat, you will need 2 flat arms that are for the top Boxi size and level. For example, if your top Boxi is a medium level 02, you will use a flat arm M_02f.
Use the first and third holes to connect the stacking arms
Use the 1 and 4th holes to connect the flat arms.
16
How to use Modi Drawers
To make a full drawer, you need to print both �1. M LVL02_Drawer_Boxi
2. M_LVL02_Drawer_insert_Boxi
To hold your drawer in place, you can use a long lock hook or a corner hook.
Corner hook
Hold your drawers closed
What to print
What to print
The Drawer insert Boxi is setup like a DIY tray. You can configure the insert box to be one big drawer or have a bunch of small compartments using the different size walls.
17
How to use Modi Lids
Flip Lid
The Flip Lid stays attached to your Boxi at all times. It opens and closes and can be latched down with a set of corner hooks (Image 2).
Latch Lid
The Latch Lid can simply slide off your Boxi. You can attach a handle to it so you can carry your Boxi. The latch also works with the Modi Cage system.
2X Bolt_2
1X Bolt_1.stl
Flip Lid
Hinge for lid
1x Latch Lid
2X Bolt_2
6X Bolt_1
2x Lock Hook lvl 01
1x Side Handle
Any large or medium Boxi
Insert printer filament into the hole that is the length of the lid.
youtube: Modi Boxi: Latch Lid
(Image 2)
18
How to use Modi Rails for minis
Rail hold downs: heights and widths
2mm
10 mm
5 mm
15 mm
5 mm
2mm
10 mm
5 mm
15 mm
10 mm
Modi Rails lets you slide your minis into place and keep them there. By using two Modi Rail hold downs, you can slip your minis into place. The hold downs come in two heights and four widths.
5mm height for smaller bases
10mm height for taller bases
Hold down configurations for each Boxi layer:
Layer 01 = Lyr01
Layer 02 = Back
Layer 03 = Back + Front
Layer 04 = Back + 2x Front
Layer 05 = Back + 3x Front
Back
Front
Layer 03 Example
Boxi
Rail box
Rail shelf
youtube: Modi Boxi: Modi Rails
How To Use Mini Tray Holders
19
Mini holders are designed to sit in the DIY Trays.This is so you can stack more of them in one box and keep your Minis safer.
You can also stack DIY Trays with minis in them on top of Small part trays.
They are also designed to mix and match different with Mini trays to have more then one size base on one level.
L_Mini_Holder_2_ xx.stl
L_Mini_Holder_1_ xx.stl
L_Mini_Holder_3_ xx.stl
L_Tray_01.5Lyrs_3.stl
L_Tray_01.5Lyrs_3.stl
L_Tray_01.5Lyrs_1.stl
L_Tray_01.5Lyrs_2.stl
L_Mini_Holder_1_ xx.stl
Example 1
Example 2
Example of different Mini Trays in Diy Trays
20
How to use Modi DIY trays
The DIY trays let you configure a versatile tray any way you want. You can make a layout of compartments to meet your needs and hold a variety of small or medium-sized parts and pieces. This is done by utilizing various sizes of walls and ribs.
Wall 1
Wall 2
Wall 3
Wall 4
Wall 5
Wall 6
Support Wall
Wall sizes
Wall 2
Support Wall
Wall 1
Wall 1
Wall 3
Support Wall
Wall 2
Example configuration
21
How to use Modi Cage
What you need to know:
1 Boxi will serve as your base. This can be a Level 02 or higher.
To know what size Cage sides to print, you need to add up all the levels you want to stack above the base Boxi and print the Cage sides for that amount. �
Example: Cage_LVL05.stl is needed for the example shown.
When attaching the Cage side, keep the matching sides on the same sides of the Boxis. You will need to turn half of them upside down to make this happen.
Level 02
+ Level 01
+ Level 02
= 5 levels
Cage_lvl05.stl
Build list for just the cage:
4X Bolt_1.stl
4X Bolt_2.stl
4x Cage sides
1x Latch Lid setup (see page 12)
See Starter Boxi: Large Cage and medium for an example build.
youtube: Modi Boxi: Modi Cage
22
TinkerCAD Remix Files
Make your own name tag for your Boxis.
Name tags
Mini trays large
Mini trays medium
Link: TinkerCAD Name Tags
Use Tinkercad to customize your own trays to meet the needs of your army.
Use Tinkercad to customize your own trays to meet the needs of your army.
Link: How to use TinkerCAD
Never used Tinkercad? Not a problem. It is pretty simple. Start with this Tutorial.
Learn TickerCAD
23
How to hold down your minis on the Mini Trays
Rubber bands
Link: Magnetic sheets
Link: Magnetic Dots
Link: Rubber Bands
Magnetic dots
Magnetic sheets
How to MAGNETIZE your Miniature Bases for Storage and Transport! (Quick and Easy)
How to magnetize your Minis
The Mini Trays are using gravity to hold and store your minis — if you are transporting them without disturbing them too much. If you transport your minis with significant agitation, you can employ other options to secure them.
24
Example Builds
25
Starter Boxi: Core Small 1 Card and deck holder
Starter Boxi: Small Card and Deck Holder
4X Bolt_1.stl
1X S_Boxi_LVL01.stl
1X S_Boxi_LVL02.stl
2x S_Arm_01f.stl
26
Starter Boxi: Dice and Small Parts Holder
16X Bolt_1.stl
5X S_Boxi_LVL01.stl
8x S_Arm_01f.stl
�Optional Trays (Holds 4):
x S_SPTL_1_Lyr01.stl
x S_SPTL_2_Lyr01.stl
x S_SPTL_4_Lyr01.stl
27
Starter Boxi: Dice Roller Small
1X S_Boxi_LVL01.stl
2x x_02f.stl or S_Arm_01f.stl
1X S_Dice_Tower_Tops.stl
4X Bolt_1.stl
28
Starter Boxi: Dice Roller Medium
1X M_Boxi_LVL01.stl
2x M_Arm_01f.stl
1X M_Dice_Tower_Tops.stl
4X Bolt_1.stl
29
Starter Boxi: Medium Drawers, Page 1
4X M_Drawer_Boxi_LVL02.stl
4X M_Drawer_Insert_Boxi_LVL02.stl
12x M_Arm_02.stl
3x Lock_Hocks_02
1x Side_Handle.stl
4x Spacer_01.stl
1x KickStand_8.stl
8X Bolt_02.stl
20X Bolt_01.stl
30
Starter Boxi: Medium Drawers, Page 2
4X M_Drawer_Boxi_LVL02.stl
4X M_Drawer_Insert_Boxi_LVL02.stl
12x M_Arm_02.stl
3x lock_Hooks_LVL02.stl
1x Side_Handle.stl
4x Spacer01.stl
1x KickStand_8.stl
8X Bolt_02.stl
20X Bolt_01.stl
31
Starter Boxi: Large Drawers, Page 1
4X L_Drawer_Boxi_LVL02.stl
4X L_Drawer_Insert_Boxi_LVL02.stl
12x L_Arm_02.stl
3x lockHocks_02.stl
1x Side_Handle.stl
4x Spacer01.stl
1x Kickstand_8.stl
8X Bolt_02.stl
20X Bolt_01.stl
32
Starter Boxi: Large Drawers, Page 2
4X L_Drawer_Boxi_LVL02.stl
4X L_Drawer_Insert_Boxi_LVL02.stl
12x L_Arm_02.stl
3x Lock_Hooks_LVL02.stl
1x Side_Handle.stl
4x Spacer01.stl
1x Kickstand_6.stl (not in image)
8X Bolt_02.stl
20X Bolt_01.stl
33
Starter Boxi: Medium Steps Boxi
1X M_Boxi_LVL01.stl
1X M_Boxi_LVL02.stl
1X M_Boxi_LVL03.stl
1x M_Flip_Lid.stl
1x Hinge_for_Flip_Lid.stl
4x M_Arm_01.stl
4x M_Arm_02.stl
16X Bolt_01.stl
2X Bolt_02.stl
34
Starter Boxi: Medium Flat Boxi
2X M_Boxi_LVL01.stl
1X M_Boxi_LVL02.stl
1X M_Boxi_LVL03.stl
4x M_Arm_01f.stl
2x M_Arm_02f.stl
12X Bolt_01.stl
35
Starter Boxi: Large Steps Boxi
1X L_Boxi_LVL01.stl
1X L_Boxi_LVL02.stl
1X L_Boxi_LVL03.stl
1X L_Boxi_LVL04.stl
1x L_Flip_Lid.stl
1x Hinge_for_Flip_Lid.stl
4x L_Arm_01.stl
4x L_Arm_02.stl
4x L_Arm_03.stl
20X Bolt_1.stl
2X Bolt_2.stl
36
Starter Boxi: Large Flat Boxi
2X L_Boxi_LVL01.stl
1X L_Boxi_LVL02.stl
1X L_Boxi_LVL03.stl
4x L_Arm_01f.stl
2x L_Arm_02f.stl
12X Bolt_1.stl
37
Starter Boxi: Medium Tackle Boxi
2X M_Boxi_LVL01.stl
2X M_Boxi_LVL02.stl
2x M_Arm_01f.stl
4x M_Arm_01.stl
18X Bolt_1.stl
6X Bolt_2.stl
2x M_Flip_Lid.stl
2x Hinge_for_Flip_Lid.stl
1x Handle_06.stl
1x M2M_Handle_Connector.stl
38
Starter Boxi: Large Tackle Boxi
2X L_Boxi_LVL01.stl
2X L_Boxi_LVL02.stl
2x L_Arm_01f.stl
4x L_Arm_01.stl
18X Bolt_1.stl
6X Bolt_2.stl
2x L_Flip_Lid.stl
2x Hinge_for_Flip_Lid.stl
1x Handle_06.stl
1x L2L_Handle_Connector.stl
39
Starter Boxi: Medium Cage
1X M_Boxi_LVL01.stl
2X M_Boxi_LVL02.stl
1X M_Boxi_LVL03.stl
8X Bolt_1.stl
4X Bolt_2.stl
4x Cage_5.stl
1x M_Latch_Lid.stl
2x lockHooks_01.stl
1x Side_Handle.stl
youtube: Modi Boxi: Modi Cage
40
Starter Boxi: Large Cage
1X L_Boxi_LVL01.stl
2X L_Boxi_LVL02.stl
1X L_Boxi_LVL03.stl
8X Bolt_1.stl
4X Bolt_2.stl
4x Cage_5.stl
1x L_Latch_Lid.stl
2x Lock_Hooks_01.stl
1x Side_Handle.stl
youtube: Modi Boxi: Modi Cage
41
Starter Boxi: Large Boxi Carrier
1X L_Drawer_Boxi_LVL02.stl
1X L_Drawer_insert_Box_LVL02.stl
1X L_Boxi_LVL02.stl
1X Boxi_Carrier_Big_Side.stl
1X Boxi_Carrier_Small_Side.stl
16X Bolt_1.stl
2X Bolt_2.stl
2x Lock_Hooks_02.stl
1x Side_Handle.stl
1x Side_Connector_2x_3.stl
2x Boxi_Carrier_Hock_B2.stl
2x Boxi_Carrier_Hock_B1.stl
4x L_Arm_02.stl�1x L_Latch_Lid.stl
12
13
13
11
12
youtube: Modi Boxi: Boxi Carrier
youtube: Modi Boxi: Mega boxi Carrier
14
14
Note: If you printed Boxi_Carrier_Small_Side.stl from the versions _001 or _002 you will need Lock_Hook_LVL02.stl for &
11
12
42
Starter Boxi: DIY Dice Tower
1X Dice_Tower_btm.stl
1X Dice_Tower_Mid.stl
1X Dice_Tower_Top.stl
1X S_Boxi_LVL01.st
20X Bolt_1.stl
2X Bolt_2.stl
4x S_Arm_02.stl
2x S_Arm_01f.stl
1x S_Basket_Handle.stl
1x Lock_Hooks_05.stl
1x Spacer_1.stl
1X Side_Connector_2x_3.stl
Or
1X Side_Connector_3.stl
4x S_Arm_02f.stl (or) M_Arm_02.stl
—-------------------------------------------
Optional:
S_SPTL_1_Lyr01.stl
S_SPTL_2_Lyr01.stl
S_SPTL_4_Lyr01.stl
12
youtube: Modi Boxi DIY Dice Tower
13
12
13
Photo will not match your final build. It will be better.
8
Customizable Latch Lid
1x L_Blank_Customizable_plate.stl
1x L_Latch_Lid_frame.stl
4x Bolt_1.stl
1x L_Latch_Lid_with_window.stl
1x M_Blank_Customizable_plate.stl
1x M_Latch_Lid_frame.stl
4x Bolt_1.stl
1x M_Latch_Lid_with_window.stl
Large
Medium
Latch Lid Mounts part 1/3
1X LLMount_Small_Holder.stl
2X Bolt_01.stl
Any Small boxi Configuration.
Any Boxi using a Latch Lid
Latch lid Mount for holding 1 small Boxi�Fits on Small Flip Lids, Medium and Larger latch lids.
1X L_LLMount_TraysHolder.stl
2X Bolt_01.stl
1X L_Tray_dice_plate.stl
Any Boxi using a Latch Lid
Dice tray for medium and large Boxis. �Fits on Medium and larger Latch Lids.
Large| Boxi
1X M_LLMount_TraysHolder.stl
2X Bolt_01.stl
1X M_Tray_dice_plate.stl
Any Boxi using a Latch Lid
Medium Boxi
Latch Lid Mounts part 2/3
1X L_M_LLMount_Bolt_On.stl
10X Bolt_01.stl
2X Side_Connector_2x_2.stl
1x M_Boxi_LVL02.stl
4x Spacer_1.stl
Any Boxi using a Latch Lid
Large Latch Lid Mount for holding 1 Medium Boxi
This mount can hold all sizes of medium Boxis.
Just adjust the Side Connector to match its level.
Latch Lid Mounts part 2/3
1X L_LLMount_Small_Holder_4.stl
2X Bolt_01.stl
Up to 4 Small boxi Configuration.
Large Boxi with a Latch Lid
Large Latch Lid Mount for holding 1 Medium Boxi
Latch Lid Mounts part 2/3
1X L_LLMount_Small_Clip_4.stl
2X Bolt_01.stl
Up to 4 Small boxi Configuration with bolt_01 to snap into the clips. Large Boxi with a Latch Lid
Large Latch Lid Mount for holding 4 small Boxis with clips
48
Parts List
49
Mini Size
50
51
52
53
54
55
58
59
Parts Images
113
Archived/Old Files
177
Parts List
178
Parts List
179
Parts List
180
Parts List
181
Parts List
182
Parts List
183
Parts List
184
Stretch Goals
185
Stretch Goals
186
Stretch Goals
187
Parts List