This Manual is for SOVOL SV02 BL Touch .
File download:https://sovol3d.com/pages/download
Scan QR code to view detailed instruction
AUTO BED LEVELING SENSOR FOR 3D PRINTER
User Manual
for SOVOL SV02 BL Touch
Facebook QR code
SHENZHEN Lian Dian Chuang Technology LTD.
Official Website: www.sovol3d.com
Tel: +86-0755-2107 4700
E-mail: sale@sovol3d.com info@sovol3d.com
www.sovol3d.com
BL Touch
Connectors
Mount
M3X6 Screws 4PCS
BL Touch probe
2.Install BL Tocuh on the mount with two M3X6 screws .
1. Insert connectors into 5 Pin port.
3. Use two M3X6 screws to secure the BL Touch to the extruder mount.
② Install BLTouch
4. Secure the cable to the ptfe tubing with a cable tie and bypass the rear side of the gantry.
④ Update Firmware
2. Click Settings Printer Manage Printers
1.Open Cura
4. After waiting 1-3 minutes to connect the printer successfully, click “Upload custom Firmware”.
3. Click“Update Firmware”
5.Select .hex file click “Open” to update, waiting until it is finished, then click “close”.
③ Circuit Wiring
USB Cable
1. Open the base and find out the mainboard.
2. Unplug the Z limit switch cable (Z Port), and insert the connectors.
3. Insert connectors into the mainboard D11 pins as the picture shows.
4. Close the base.
5. Connect the computer and the mainboard with USB cable to update firmware.
A11
A12
D11
D12
⑤ Bed Leveling
0.2mm
A4 PaPer
figure 3
2. Setting Leveling Auto home，click “Z-” to adjust the distance between the nozzle and the hot bed to 0.2mm (the thickness of A4 paper) (For example figure 3) Switch “off ” botton to “on” to open”measuring”
1. Setting Leveling AUX leveing, click the number and rotate the leveling nuts in turns so that the distance between the hot bed and the nozzle in these 5 positions is 0.2mm ( the thickness of A4 paper) (For example figure 3)