CAD Work Breakdown
Divide work between Emmanouil, Brian, and Cedric. There are 13 items here. Each should be a separate file. After all files are drawn up, a separate final assembly document should be created. The image below is not accurate, but can be used to note the 13 items needed. Please upload a files here so everyone sees the status and others can join.
4
2
See note below:D3D Left Y Axis
D3D X Axis
1
3
5
6
7
8
9
D3D Extruder With Mount
10
11
12
13
Note: Simple means that no bolts are included, otherwise, bolts are included (they take time and memory)
BH
CL
EK
EK
CL
EK
CL
EK
EK
Build
Additional Parts
D3D Selection
Note these come in different detection distances: 2mm, 4mm, etc.
Ones without circuit are not found on Amazon Prime.
D3D Selection
Note Original Prusa Z Probe wiring
Auto Bed Leveling Probe
Frame and Fitting the 3D Printed Pieces
Make the magnet hole locations on idler and motor side such that they can attach to the 2” width of the frame
Maybe remove this magnet hole left
Maybe leave
This, but it won’t
Work with 2”
Frame width.
No other option
Exists, but 6
Magnets are
enough.
You mean to move it left?�Same with the bottom hole?
D3D Geometry - XYYZ Configuration
Make this in FreeCAD
Make this in FreeCAD