1 of 17

Assignment #7-part1-TTL� Simplify Lethal Security Monitor System using Boolean Algebra Posted 10/6, due 10/16 11:59 pm �Late: 10/17 12:01 am – 10/18 11:59 pm �Game over: after 10/18 11:59 pm: 0 point

  • Report Individually

​

  • FirstName LastName section #:

​

​

  • Instruction:
  • To edit, you don't need to "request access", do: File/Download/Microsoft PowerPoint(.pptx), save to your local drive; then you can edit your local file.

​

  • File name: Save this file as: 120-assign-07-FirstName-LastName

​

  • Email report directly to ui.luu@gccaz.edu, (Note: submit this assignment using your "maricopa.edu" email to get direct response for any feedback) (Your personal email address may get filtered into my SPAM folder)

​

  • Scores:
  • (1 point) Correct file type and name with PowerPoint.(pdf file = 0 point)
  • (1 point) Your Name (on this page)
  • (1 point) Email directly to ui.luu@gccaz.edu
  • (22 points) Contents of this PowerPoint
  • (3 points) submit report on time
  • Total: (on time: 28 Max) (late: 25 Max) (game over:0)

2 of 17

Lethal Security Monitor / System Block Diagram

***Warning: This problem is for academic exercise only. Do not build this machine, this product will NEVER meet FDA approval based on safety consideration

3 of 17

CSE/EEE 120� Lethal Security Monitor System �Define Functional Requirements

​

  • System I/O:

​

  • Inputs:
    • Arm switch
    • Motion sensor
    • Infrared sensor

​

  • Outputs:
    • Warning
    • Alarm
    • Scanner (Note: the Scanner is a motorized rotational platform that carries an infrared sensor + Laser Zapper)
    • Laser Zapper (Lethal/Weapon Grade/ 1MW)

​

  • Functional Requirement:

​

    • When system is armed (Arm switch = 1) then
      • Send Warning signal (Warning = 1)
      • Monitor Motion sensor, when motion is detected (Motion sensor =1) then
        • sounds alarm (Alarm = 1)
        • activate Scanner (=1)
      • When warm body is detected (Infrared sensor =1) Activate Lazer Zapper (=1)

​

    • When system is not armed (Arm switch = 0), deactivate all outputs.

***Warning: This problem is for academic exercise only. Do not build this machine, this product will NEVER meet FDA approval based on safety consideration

4 of 17

(Given) Step 1: Create Truth Table�(To practice see @ class website: Practice SOP Design / Lethal Security System (link)

A

B

C

​

W(L1)

G(L2)

S(L3)

L(L4)

0

0

0

​

0

0

0

0

0

0

1

​

0

0

0

0

0

1

0

​

0

0

0

0

0

1

1

​

0

0

0

0

1

0

0

​

1

0

0

0

1

0

1

​

1

0

0

1

1

1

0

​

1

1

1

0

1

1

1

​

1

1

1

1

Inputs:

    • S1: Arm switch (A)
    • S2: Motion sensor (B)
    • S3: Infrared sensor (C)

​

Output:

    • L1: Warning (W)
    • L2: Alarm (G)
    • L3: Scanner (S)
    • L4: Laser Zapper (L)

5 of 17

(Given) Design equations based on Truth Table�Using SOP Design Method

6 of 17

(For Reference ONLY, do NOT build this circuit) �Logic Diagram Before using Algebra to simplify

Inputs:

    • S1: Arm switch (A)
    • S2: Motion sensor (B)
    • S3: Infrared sensor (C)

Output:

    • L1: Warning (W)
    • L2: Alarm (G)
    • L3: Scanner (S)
    • L4: Laser Zapper (L)

3

4

7 of 17

( 2 points) Simplify Design Equations using Boolean Algebra

Assignment #6 Solution Simplified

​

W = A W = A

​

G= ABC’ + ABC G = __________ (1 point)

(show your work: 0.5 point)

​

S = G S = G

​

L = AB’C + ABC L = ___________ (1 point)

(show your work: 0.5 point)

​

​

(Notation: C’ is NOT C; B’ is NOT B)

8 of 17

( 2 points) Draw Your Logic Diagrams(1 points) with Pin Assignments(1 points)

9 of 17

( 2 points) Build Circuit based on Logic Diagram�(Photo of Your circuit)

​

Make photo resolution around 1280x720 to keep PowerPoint file small

10 of 17

Test Case # 0�(1 point) Test Data�S1=0, S2 = 0, S3 = 0�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

11 of 17

Test Case # 1�(1 point) Test Data�S1=0, S2 = 0, S3 = 1�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

12 of 17

Test Case # 2�(1 point) Test Data�S1=0, S2 = 1, S3 = 0�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

13 of 17

Test Case # 3�(1 point) Test Data�S1=0, S2 = 1, S3 = 1�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

14 of 17

Test Case # 4�(1 point) Test Data�S1=1, S2 = 0, S3 = 0�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

15 of 17

Test Case # 5�(1 point) Test Data�S1=1, S2 = 0, S3 = 1�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

16 of 17

Test Case # 6�(1 point) Test Data�S1=1, S2 = 1, S3 = 0�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small

17 of 17

Test Case # 7�(1 point) Test Data�S1=1, S2 = 1, S3 = 1�L1 =___, L2 = ___, L3 = ___, L4 = ___�(1 point) Screen Shot with correct test Result (Make sure I can see switch positions)�

Make photo resolution around 1280x720 to keep PowerPoint file small