1 of 31

High Stakes

Robot Completion

2 of 31

Agenda

Completing the Robot

Testing the Robot

Additional Concepts

3 of 31

Completing the Boost Robot

4 of 31

Final Construction

  • Three primary components
    • Drivetrain
    • Clamp
    • Intake

​

  • Additional parts of the robot
    • Cabling
    • Mounting battery
    • Finishing Touches

5 of 31

Parts List

1x Battery Cable

1x Brain

2x Battery Clips

4x 0.875” screws

4x 1/8” spacers

1x Radio

1x Battery

4” Zipties

Wires

4x keps nut

2x ½” screw

2x 0.375” screw

6 of 31

Video

7 of 31

Final Construction

Key Points

Zip Ties should be correct tightness

Be careful when putting on the battery

These clips can break!

8 of 31

Testing the Robot

9 of 31

Testing the Robot

  • After connecting wires: test out each component individually
  • Step 1: Drivetrain
    • Robot should travel in straight path
    • Check for friction - go to devices → motors → select the port of each drivetrain motor

10 of 31

Testing the Robot

​

  • Step 2: Clamp
    • C-channel attached to gear is tight
    • Ensure that platform has correct spacing

​

11 of 31

Testing the Robot

​

  • Step 3: Intake
    • Chain should have the right amount of slack (not too loose)
    • Sprockets should be powered well (chains must be aligned)
    • Rings must intake smoothly
    • Adjust standoffs & tension on arm

12 of 31

Observation Process

​

  1. Pre-Observation: Design should meet original criteria and not damage other mechanisms
  2. Observation: Close attention to detail & observation through videography
  3. Debrief: Discuss with your team the strengths and weaknesses of the design
  4. Post-Observation: Observe weaknesses and come up with a solution

13 of 31

Observation Process

  • Steps to evaluate your design:
  • Record the test being done
  • Record the problem
  • Loop back to solving the problem

​

  • Coming up with a design solution
    • Attempt to apply scientific concepts

​

Create a proper testing environment

Identify the problem

Use scientific knowledge to come up with solution (do not rely on intuition)

14 of 31

What are some others ways to test your design?

15 of 31

Questioning Solutions

Questions to ask yourself as you work on a solution:

    • Is this the easiest solution or the best solution?

​

    • Does the mechanism have structural integrity?

​

    • Are the angles and/or geometry correct?

​

    • Resources on the Web
      • YouTube
      • Vex Forum
      • Discord

​

16 of 31

Summary

Now that you have a basis of all the concepts on the boost robot, you are now ready to complete it and start testing it!

​

17 of 31

Additional Concepts

18 of 31

Torque Vs Speed

  • Torque:
    • What it is: Torque is the twisting power of your robot's motor. It’s like the muscle your robot uses to lift, push, or pull heavy stuff.
  • Speed
    • What it is: Speed is how fast your robot moves. If you want your robot to zoom across the floor, this is what you need
  • Application:
    • You must have a balance between torque and speed on your robot

19 of 31

Question

What does more torque allow a mechanism to do?

20 of 31

Question

What is a force?

21 of 31

Forces

  • Concept:
    • Force is any push or pull that can change the robot's movement or shape.
    • Forces allow the robot to move, lift objects, and interact with its environment.
  • Application:
    • There is a force required to lift score a ring on the rubber
    • There is a force required to push your opponent

​

22 of 31

Question

What are some examples of forces on your robot?

23 of 31

Tension & Compression Forces

  • Tension Forces:
    • What it is: Tension forces pull or stretch an object.
  • Compression Forces:
    • What it is: Compression forces push or squeeze an object.
  • Application:
    • They can occur between C channels when you are bracing parts of your build. Some of them will need to pull the components together while others will try to push them apart

​

24 of 31

Friction

  • Concept:
    • Friction is the force that resists the movement of two surfaces rubbing against each other.
    • It can either help or hinder your robot’s performance.

​

25 of 31

Question

Where is friction used on your intake?

26 of 31

Material Properties

  • Materials contain different tensile strengths and elastic properties

​

tensile strength →

Elasticity →

maximum amount of stress a material can withstand before breaking

ability of a deformed material body to return to its original shape

27 of 31

Question

​

What is an elastic force?

What are some uses of an elastic force?

28 of 31

Material Properties

  • Examples:
    • C Channels:
      • Have a bendable property that can help with general structure
    • Axles:
      • Low strength axles are one of the most common materials that bend in vex due to stress
    • Plastic
      • Plastics are flexible and can be used to create variable compression on a mechanism

29 of 31

Question

Situation: 18lb robot runs full speed into an aluminum bar and a thin plastic sheet:

​

What will happen to each material?

30 of 31

Question

Situation: 18lb robot runs full speed into an aluminum bar and a thin plastic sheet:

​

What will happen to each material?

The aluminum bar will likely bend

The plastic sheet may snap in two

31 of 31

Q/A