1 of 4

D3D Universal 2 Evolution

base

g

3 piece base separated into 3 pieces

3 piece base allows the bed area to be extended from 6” on the Y axis to more like 12”. Concept: screw in pieces 2 and 3 into 1. 1

Y axis

1

2

3

2 of 4

D3D Universal Evolution

Screw in the extensions 2 and 3 into the main body of base to extend bed size in the Y direction from 6”x6” to 6”x12”. This doubles bed size, with very little added materials - just extended rods, belt, and bed.

1

2

3

This doesn’t make sense. Just screw in motor and idler pieces into a base of wood

3 of 4

D3D Universal Evolution 3

  1. Integrate Z Axis motor piece so it is part of part 1
  2. Integrate Y Axis motor piece into part 2
  3. Integrate Y Axis idler piece into part 3

1

2

3

Y axis

4 of 4

D3D Universal Evolution 4: Another Concept

Split base into 2, not 3. Advantage: can be printed on a 6”x6” print bed.

Base is attached to a solid substrate, such as OSB or a 2x12 piece of lumber.

Integrate Z motor piece and Y motor piece into 1, and integrate Y idler piece into part 2.

1

2

1

2