1 of 19

EVALUATION OF IC ENGINE PERFORMANCE WITH VARIABLE ETHANOL PETROL RATIO

GUIDED BY : CREATED BY

PROF. R.H. TIKE INNOVATIVE THINKERS

2 of 19

TEAM :-

  • 1. Vaibhav Bhangale
  • 2. Pradnya Nanaware
  • 3. Sairaj Khosare
  • 4. Shankar Misal
  • 5. Tejas Nale

3 of 19

INTRODUCTION

1) When ethanol percentage increases then efficiency increases at a point

2) Ethanol having high octane number, burning velocities and Wide flaming limits

3) Ethanol is renewable source of energy

4)Ethanol is used then supply of petrol decrease in system

5) Ethanol is eco-friendly

4 of 19

�PROBLEM STATEMENT�

  1. Now a days the availability of a petrol is too much so that this situation will be overcome
  2. Engine And components will need to be tested and calibrated with E20 as a fuel.

5 of 19

METHODOLOGY

1) Knowing cylinder all dimension just like bore diameter, length, pressure, speed etc

2) Then after we can calculating indicated power and brake power using formula And now we will get efficiency

3) So in that efficiency we will know in what value of Ethanol the efficiency increased

6 of 19

LITERATURE REVIEW

​

​

​

​

1) A. Lacke (2012) : Has worked with Alternative Renewable Fuels such as bio ethanol Gasoline blended fuels are becoming essential due to increasing Oil Priceshas stated that ethanol gasoline blends which has high octane rating can be used as fuel in order to substitute some part of gasoline engine application

2) Paolo Loadice et al (2016) : Has Investigate that the effect of Ethanol on gasoline blends on CO and HC emission in last generation 4 stroke SI engine with solid start transient has worked with ethanol gasoline mixture by 10% 20% and 30%

3) L.G. Reeser et al (2015) : Has Stated that increasing the Octane Rating which particularly important in unleaded Fuel and reduce Carbon Monoxide mission in Engine

​

7 of 19

LITERATURE REVIEW

4) Dattatray Bapu et al (2014) : Have worked about injection timing On which ethanol blend the blend tested D70/E20/B10 (Blend A) D50/E30/B20 (Blend B ) D50/E40/B10 (Blend C)

5) Eknath R. Deore et al (2016) : Have experimentally Calculated that the compression ratio for ethanol diesel blend paper represent the test result for blend 5.5 % and 20% and three different compression ratio it observed that 20% ethanol blend with very good efficiency

6) Dr. Abk Choube (2012) : It had investigated that of four Stroke Petrol engine is carried out to analyse the engine performance state that the engine performance and exhaust emission. exhaust determined by different blend ratio (E0,E20,E40,E60,E80)He prooved that E60& & E40 have best results

8 of 19

SPECIFICATIONS

We selected any one four stroke vehicle

For eg. Maruti 800

T = 59000N.mm @25000 rpm

Pm = 40.36 BHP

L = 72 mm

Bore Diameter = 66.5 mm

Area = 3.47×10^3mm^2

9 of 19

Result’s

10 of 19

BAR CHART FOR ETHANOL PETROL BREAKE THERMAL EFFICIENCY

11 of 19

GRAPHICAL REPRESENTATION

12 of 19

FORMULAS TO BE USED

  •  

13 of 19

CALULATIONS

1) Calculation of MF Value for 20% Ethanol, 80% Petrol

Mass Density = 789

Volume = 1.066x10^5m^3

MF = V x Mass density

= ( 1.066x10^5) x (789)

= 8.4107x10^3 kg

MF = 8.4107 Gram

​

And we can also calculate same steps following and calculate mf value

14 of 19

2) Now for BSFC

BSFC = M.F. /B. P.

mf for 39.7085 …. (1)

= 39.7085 / 25.28x10^6

25.28x10^6

BSFC = 2.57x10^3 g/J

​

3) Breake Thermal Efficiency

Nbth = BP x 3660

MF x CV

= 25.28x10^6x3660

378.89x10^6

Nbth = 23.99 %

​

15 of 19

ADVANTAGES

1) Ethanol is good for the environment :- Lower CO2, CO Hydrocarbons and oxide of nitrogen emissions.

2) Ethanol is widely available and easily used.

3) Ethanol is good for the economy.

4) Ethanol is ecologically effective.

5) Ethanol fuel is cost effective compared to other Biofuels.

6)Ethanol fuel is source of Hydrogen.

​

​

16 of 19

LIMITATIONS

1) It isn’t as effective as fuel as traditional gasoline.

2) It is a corrosive fuel.

3) The energy content of ethanol is about 33% less than Pure gasoline which lead lower fuel mileage.

​

17 of 19

COMPARISON BETWEEN ETHANOL AND PETROL

ETHANOL

PETROL

Ethanol is produced from present day biomass

Petrol is product of biomass present millions of year ago

Ethanol is renewable energy source

Petrol is non renewable energy source

It release net zero carbon dioxide in the environment

Petrol increase the concentration of carbon dioxide in the environment

Ethanol is sustainable source of energy

Petrol is non sustainable source of energy

Energy generation is low

Energy generation is comparatively high

Required more investment for their production and are costly

Comparatively less investment and less cost to biofuel

18 of 19

CONCLUSION

Hence, we studied Ethanol and petrol ratio so we can found that at 40% Ethanol, 60% Petrol (Efficiency – 61.07% & BSFC 2.59×10^6 ) and 30% Ethanol, 70% ( Efficiency 57.23% BSFC 2.61×10^6)Petrol this two condition are suitable for petrol engine.

19 of 19

THANK YOU