Hi,

I am Marzia Thasin

Education

Bachelor of Science in Electrical And Electronic Engineering (Jan 2019- Nov 2023)

Department of Electrical And Electronic Engineering (EEE)

Ahsanullah University of Science And Technology (AUST), Dhaka, Bangladesh

​

Farewell Celebration Event!

The last Undergraduate Semester, marking the end of undergraduate life!!!

Thesis Submission Day! Ah, what

a journey it was!!

Professional Experience

Technometrics Limited, Dhaka, Bangladesh

Presales Engineer Intern, Depertment of BMS, Fire, Surveillance, and Automation, (Jun 2023 - Aug 2023)

​

Responsibilities:

​

• Conducted site visits and feasibility assessments to understand client requirements and site constraints.�
• Assisted in designing and optimizing CCTV surveillance layouts to ensure maximum coverage and system efficiency.�
• Supported the planning and coordination of building systems, including HVAC, fire safety, lighting, access control, and security systems.�
• Prepared comprehensive BOQ (Bill of Quantities) documents and performed detailed calculations for accurate project costing and estimation.

​

Achievements & Competitions

• Champion, Robo Soccer Event – Cognibat 2021 (AUST)� Designed an Arduino-based soccer-playing robot with servo-controlled kicking mechanism.�

�

​

Robo Soccer Robot & Team, Cognibat 2021 (AUST IDC)

Achievements & Competitions

​

• Team Lead & On-Campus Winner, Hult Prize 2021� Developed a social enterprise model focused on sustainable community impact

​

• Hult Prize Impact Summit Regional Finalist, Hult Prize 2021�
• Mentor, Hult Prize at AUST 2022� Conducted a workshop on how to write an abstract for new participants.�

​

Achievements & Competitions

• 70% Scholarship Holder, Ptak Prize Global Case Competition (ISCEA)� Solved real-world supply chain optimization challenges.

​

• Analyzed COVID-19 disruptions in Bangladesh’s FMCG supply chain and proposed an Industry 4.0, AI-enabled strategy to improve visibility, resilience, and responsiveness.

​

Overview of the Winning Project

• Champion at Robo Soccer Event (Cognibat21)
• SoccerBot: Wireless Motion and Kicking Control using Arduino
• Capable of moving in all directions and kicking a ball.
• Controlled via serial or Bluetooth commands (like F, B, L, R, S, X)
• Built using Arduino UNO, motor driver, DC motors, and a servo-based kicker

​

Overview of the Winning Project

​

• On-Campus Winner, Hult Prize 2021
• A Healthy Organic Snack from Prickly & White Waterlily Seeds
• Problem: Modern snacks are often fried, high in fat, and low in nutrition, health risks
• Solution: low-cost, organic, and nutrient-rich puffed snack
• Highlights: 100% natural and contamination-free, Never fried – puffed and flavored with sugarcane molasses, Affordable for all age groups

​

Academic Project- Project Plant Care

An IoT-based smart irrigation system using Arduino that autonomously manages light, temperature, and water

​

Control Logic:

• Moisture ↓ → Water pump ON�
• Temperature ↑ → Cooling fan ON�
• Light ↓ → Servo opens window for more

light

​

​

​

Academic Project- Hybrid Boost Converter for Renewable Energy Systems

Non-Isolated Interleaved Hybrid Boost Converter for Renewable Energy Applications

Key Components: MOSFET (IRFP250N), 555 Timer IC (PWM generator), inductors (220 µH), capacitors, diodes (1N4007), SMPS input.

​

Academic Project - Load Flow Analysis Using PowerWorld Simulator

​

Analyzed real (MW) and reactive (MVar) power flow, voltage levels, and line losses to ensure system stability and efficient energy distribution

​

This project strengthened my skills in system modeling and

optimization, concepts that parallel network flow analysis in

sustainable mobility systems.

Academic Project-Overload and Short Circuit Protection System with voltage stabilizer

The objective of this project is to protect our loads from Overload & short circuit current with voltage stabilizer.

Equipment:

1. Step down transformer

2. Capacitor

3. Truck

4. Reset

5. Relay

6. Current transformer

7. IC LM324N

8. Zener Diode

​

​

Research Publication - LFR Waiter: Arduino Based Waiter Robot

Title: “Arduino-Based Android-Controlled Robo Waiter” (IEEE TENCON 2022)

• Designed and implemented an Android-controlled waiter robot for restaurant automation during COVID-19.
• Integrated Arduino Mega2560, IR sensors,

and Bluetooth (HC-05) for wireless control.

• Used PID algorithm for accurate line

following and ultrasonic sensor for

obstacle detection.

• Achieved 98% path-following accuracy,

93% obstacle avoidance, and 99% delivery success

• Demonstrated routing and path optimization in a real-time

environment — similar to network flow modeling in transportation systems.�

Undergraduate Thesis - Comparative Study of Low-Power CNTFET-Based Ternary SRAM Design

• Designed three CNTFET-based ternary SRAM architectures to reduce power and delay.
• Used Virtual Source CNTFET model for low-power, high-speed memory design.
• Analyzed power, delay, PDP, and EDP under temperature variations.
• Achieved significant power reduction (~84–98%) compared to conventional designs.
• Demonstrated system-level efficiency improvement, linking to optimization and modeling skills.

​

Multi-Criteria Decision Analysis of Prioritizing Sidewalk Repairs in Providence, RI, Considering Budget Constraint

​

Sidewalk Repair Prioritization (MCDA + Knapsack)

• Goal: Prioritize sidewalk repairs transparently under a fixed budget.
• Data: 10 sidewalk segments scored on 6 factors — condition, cost, ADA issues, population density, % disabled residents, and proximity to school/transit.
• Method:
• Normalize criteria and apply fixed weights.
• Compute a Priority Index (PI) for each segment (weighted sum).
• Use a 0–1 knapsack model to choose the set of segments that maximizes total PI within a $190k budget.
• Result: Optimal combo (S1, S5, S2) balances poor condition, equity needs, and budget.
• Takeaway: Simple framework that cities can tune with stakeholder input to make sidewalk repair decisions more fair and data-driven.

​

Volunteering Experiences

• “Prottashar Alo” Foundation(2018-2019) dedicated to fulfilling the hopes of society’s underprivileged people

Massive Fire in Mirpur Slum (2019)

Member, “Prottashar Alo” Foundation – Community service and social welfare activities

Clothing & Food Distribution for Fire-Affected Children in Mirpur (2019)

Volunteering Experiences

AUST Innovation and Design Club, MindSparks 20, Junior Executive(2020)

​

​

Visited MIST and BUP to invite their campus ambassadors for Mindsparks 2020.

Managing the Participant Registration Booth – Mindsparks 2020 (AUST IDC)

Mindsparks 2020 Success Celebration

AUST IDC Club Group Photo – Mindsparks 2020

Stage Performances

Reciting a poem at the AUST Cultural Club’s Victory Day program – 16 December 2019

Hosted EEE Day 2022 as Event Anchor

Rabindra Sangeet Performance – “Kotobar Bhebechhinu”, EEE Day Program 2022

Selected Photography Works

Exhibited Photograph at INNOVEX Dhaka 2018

Tea Gardens of Sreemangal – 2019

Lalakhal, Sylhet – 2019

Hills of Bandarban – 2021

Selected Photography Works

Cox’s Bazar – 2021

Hills of Bandarban – 2021

Cox’s Bazar – 2022

Cox’s Bazar – 2021

Sylhet Mazar – 2019

Thank You!