1 of 2

Building your vessel step by step - Կառուցեք ձեր նավը քայլ առ քայլ

1. Develop your idea first!

Նախ զարգացրե՛ք ձեր գաղափարը:

3. Make the bottom: a disc of clay that is 1-1.5 cm thick and 7-10 cm in diameter. Store any leftovers in your bag.

Ներքևը պատրաստեք՝ կավե սկավառակ, որի հաստությունը 1-1,5 սմ է և տրամագիծը՝ 7-10 սմ: Մնացեք ձեր պայուսակի մեջ:

8. Smear your coils together using only one finger or one thumb.

Քսեք ձեր պարույրները՝ օգտագործելով միայն մեկ մատը կամ մեկ բութ մատը:

2. Divide your clay into four pieces: one for a base, two for coils, and one for everything else and for emergencies.

Ձեր կավը բաժանեք չորս մասի՝ մեկը հիմքի համար, երկուսը կծիկի համար, և մեկը՝ մնացած ամեն ինչի և արտակարգ իրավիճակների համար:

9. Don’t pinch on either side because you will make your pot very dry and thin.

Մի կծկեք երկու կողմից, քանի որ ձեր կաթսան շատ չոր և բարակ կդարձնեք:

7. Stretch the coils by spreading your fingers while rolling.

Ձգեք կծիկները՝ գլորելիս մատները տարածելով։

14. Scribe and then trim the lip.

Գրեք, ապա կտրեք շուրթերը:

13. Add a foot by attaching a coil.

Ավելացրեք ոտք՝ կծիկ կցելով:

15. Coat your pot with white slip. Let it dry and add coats until there are no streaks.

Ձեր կաթսան պատեք սպիտակ շերտով։ Թողեք չորանա և ավելացրեք վերարկուներ, մինչև շերտեր չմնան։

2 of 2

11. Shape your vessel by paddling it with a wooden spoon or stick.

Ձևավորեք ձեր անոթը՝ թիավարելով այն փայտե գդալով կամ փայտով:

16. Do a very light rough sketch of your drawing on your pot.

Կատարեք ձեր նկարի շատ թեթև կոպիտ ուրվագիծը ձեր կաթսայի վրա:

12. Shave it with a knife. Then smooth it with a metal/plastic/silicone rib.

Սափրվել դանակով։ Այնուհետև հարթեցրեք այն մետաղական/պլաստմասսե/սիլիկոնե կողով:

17. Take a sharpened pencil and carve through the slip into the brown clay.

Վերցրեք սրած մատիտ և սահիկի միջով փորեք շագանակագույն կավի մեջ:

18. Finally, carve your name on the bottom.

Ի վերջո, փորագրեք ձեր անունը ներքևում:

10. Smooth the inside with your fingers. If you can’t reach, it is OK.

Մատներով հարթեցրեք ներսը։ Եթե չեք կարողանում հասնել, լավ է:

6. Remember that you are not squeezing the coils. Work quickly!

Հիշեք, որ դուք չեք սեղմում կծիկները: Աշխատեք արագ.

5. Make a series of coils that are about 1-1.5cm thick.

Պատրաստեք մի շարք կծիկներ, որոնց հաստությունը մոտավորապես 1-1,5 սմ է:

4. Keep it fairly rough because smoothing it will dry it out.

Պահպանեք այն բավականին կոպիտ, քանի որ հարթեցնելով այն կչորանա: