1 of 3

Setting Up Pressure Sensor

2 of 3

Setting Up the Probe

  • Plug in LabQuest and wait for it to boot up.
  • Select the “Sensor” drop down menu at the top and select “Sensor Setup”
  • Select “CH 1” and click on “No Sensor”
  • Scroll to “Pressure”and select. Then select “Pressure Sensor”

3 of 3

Calibrating the Probe

  • Select the Sensor drop down menu
  • Click on “Calibrate”
  • Select “CH 1 Pressure Sensor”
  • Click on the check box “One Point Calibration”
  • Click on “Calibrate Now”
  • Enter the value of the air pressure that we calculated in kPa
  • Click on “Keep” then click on “OK”