Single Window - Materials
(a) 2x6 - 33”
(b) 2x6 - 58.5”
(c) 2x6 - 60”
(c) 2x6 - 60”
(d) 2x8 - 30”
QTY | Material | Cut To |
1 | (a) 5ft 2x6 | 33” |
2 | (b) 5ft 2x6 (1.5” x 5.5”) | 58.5” |
2 | (c) 5ft 2x6 | 60” |
1 | (d) 6ft 2x8 (1.5” x 7.25”) | 30” (1) |
2 | 17ga stucco wire | 30”x 60” |
| 3” deck screws | |
(1) Save second half of 6 ft board for attic window
36”
Single Window - Assembly
(3x) 3” screws
1
Angle 2x8 sill board slightly towards the front - so that any rain water that enters the window cavity can drain towards the outside. This can be achieved by fastening the back (interior) side of the board up to ⅛” higher - while keeping the front flush with the bottom of the studs.
Tilt forward
Flush
(3x) 3” screws
Sandwich mesh between 57” and 60” boards
(3x) 3” screws
3” screws every 6”
(3x) 3” screws
(3x) 3” screws
(3x) 3” screws
3” screws every 6”
2
Single Window - Installation
24”
4 courses of CEBs
1
2
3
60”
12”
84”
90”
60”
15 courses of CEBs