1 of 9

2 of 9

SERVER

OCP NIC Community Update�October 2026

for Server Project

�����Sub-project Project Wiki: https://www.opencompute.org/wiki/Server/NIC�

Mailing List: https://ocp-all.groups.io/g/OCP-NIC

NIC3.0

3 of 9

Agenda

  • OCP Global Summit
  • October updates
  • Draft rev1.7 spec

​

4 of 9

OCP Global Summit

Accepted Presentations

  • OCP NIC 2026: Gen 7 and liquid cooling – More speed and power ahead.
    • Jason Rock – Dell Technologies
    • Thomas Ng – Intel Corporation

Innovation Village

  • Focused on AI / Liquid cooling discussions and demo to help drive spec requirements
    • Amphenol, Broadcom Inc, Dell Technologies, Intel Corporation, Meta, Portwell

​

5 of 9

October updates

Liquid cooling reaches the NIC

Fan-less, manifold-cooled racks are moving liquid beyond xPUs to NICs, DIMMs and SSDs

Driven by 400G–1.6T NICs and optics

200 W per connector

Proposal: adopt SFF-TA-1037 4C+ EP, up from 80 W today

Backward compatible; a 200 W NIC in an older slot needs power-limit control

Liquid-cooled TSFF reference

Yet to align on LC keep-in zone in draft

​

TSFF hot-aisle cooling estimates contributed to R1.7

System with No Fans

xPU

NIC

DIMM

SSD

New: NICs on the loop

6 of 9

Draft Spec for 1.7.0

  • Opens:
    • DSP0220 (DMTF FRU) requirements text

​

  • Your feedback is welcomed!
  • The draft spec is available on the Wiki page: https://www.opencompute.org/wiki/Server/NIC
  • Scroll down to “Working Draft Docs”
  • Content review in November and submit to steering committee by end of Q4’2026

​

7 of 9

​

Thank You

​

​

​

​

​

8 of 9

Liquid Cooled TSFF Keep-in zone discussion

​

Intent is for System vendor and/or NIC vendor that yet to investigate into liquid cooling to have a recommended reference

9 of 9

200 W power connector

  • SFF-TA-1037 (PMM) ⇒ 200W 4C+ EP connector
    • Backwards compatible with SFF-TA-1002 cards
    • Large Power / GND blade on NIC/connector
    • Requires updated platforms for high power cards

​

  • Configurations
    • Available in vertical, RA and straddle mount
    • Cabled / panel mount?
    • Gen 7 support?

​

  • Things to solve
    • Cooling
    • Preventing 200W card from plugging into legacy chassis.
    • Mechanical interlock - interference fit?
    • FRU - read power budget first? Hardware pin interlock?

Reference – Public SNIA document: https://members.snia.org/document/dl/51356